BAPI Manuals & User Guides

BAPI BLE Wireless Receiver and Digital Output Modules Overview and Identification The Wireless Receiver collects the data from up to 28 wireless sensors. The data is then integrated into the BMS by a BACnet MS/TP or Modbus RTU module, a…

BAPI 54001 Wireless Receiver and Digital Output Modules Overview and Identification The Wireless Receiver collects the data from up to 28 wireless sensors. The data is then integrated into the BMS by a BACnet MS/TP or Modbus RTU module, a…

BAPI BA-WT-BLE-QS-W-IS-BAT Stat Quantum Slim Wireless Room Temperature Sensor Transmitter Specifications Product Name: BAPI Wireless Site Verification Model Number: BAPI_Wireless_Site_Verification Revision Date: 08/07/25 Part Number for BAPI-Stat Quantum Slim Wireless Room Temperature Sensor/Transmitter: BA/WT-BLE-QS-W-IS-BAT BLE Wireless Site Verification Overview and…

BAPI R Series Refrigerant Leak Detector Product Specifications Product Name: BAPI Duct and Rough Service Refrigerant Leak Detectors Application: Detecting a wide range of refrigerants in non-critical ppm measurement Output: Voltage increases with refrigerant concentration Installation Date: Rev. 07/21/25 Rough…

BAPI 53647 Water Leak Detector Power Adaptor Board Product Overview The Power Adaptor Board allows BAPI's Water Leak Detectors to be powered by both AC and DC voltage. Please note that the board is only required when using AC voltage.…

BAPI 52374 Pendant Temperature and Humidity Sensor  Specifications Power: 16 to 40VDC, 40 mA max (20 mA/loop) DC Humidity Sensor Type: Capacitive Polymer Temperature Sensor Type: 1KΩ, 2 Wire Platinum RTD, 385 Curve Humidity Output: 4 to 20mA over 20…

BAPI BA-WTH-BLE-D-BB-BAT Wireless Duct Temp Humidity Sensor Installation Guide Overview and Identification User adjustable settings via receiver or WAM Onboard memory to store readings when communication is interrupted Transmits to a digital Gateway or a wireless-to-analog Receiver BAPI’s Duct Wireless…

BAPI BA-WTH-BLE-D-BB-BAT Wireless Duct Temperature Sensor Specifications: Product Name: Wireless Duct Temperature Sensor Model Number: 49799_Wireless_BLE_Duct_Temp User adjustable settings via receiver or WAM Onboard memory to store readings when communication is interrupted Transmits to a digital Gateway or a wireless-to-analog…

BAPI 53000 Digital CO and NO2 Sensors Instruction Manual Product Identification and Overview Several options for Temperature, Humidity, Carbon Monoxide (CO) and Nitrogen Dioxide (NO2) Field configurable BACnet MS/TP and MODBUS RTU output CO measurement range of 0 to 500…

BA-RCV-BLE-EZ-BAPI Wireless Receiver and Analog Output Modules Product Information Specifications Product: Wireless Receiver and Analog Output Modules Model Number: 50335_Wireless_BLE_Receiver_AOM Compatibility: Works with up to 32 sensors and 127 different modules Overview The Wireless Receiver from BAPI receives signals from…

This document provides comprehensive installation and operating instructions for the BAPI Digital CO and NO2 Sensors. It covers product identification, configuration, mounting procedures for wall and duct installations, wiring termination, operation details, maintenance, troubleshooting diagnostics, and technical specifications.

This guide provides installation and operational details for BAPI Averaging Duct Sensors (BA/#-A series). It covers product overview, various enclosure types, mounting procedures, wiring and termination, troubleshooting diagnostics, and detailed specifications for thermistor and RTD models.

Installation and operations guide for the BAPI-Stat Quantum wireless room temperature and humidity sensor. Learn about setup, configuration, adjustable settings, and specifications for building automation.

Technical specifications and ordering information for the BAPI ZPM BAPI-Box Pressure Sensor, a Zone Pressure Multi-Sensor (ZPM) with an IP66 enclosure, offering multiple pressure ranges, output options, and accuracy levels for building automation.

Installation and operations manual for the BAPI-Stat Quantum wireless room temperature and temperature/humidity sensor. Covers setup, configuration, power options, mounting, operation, diagnostics, and specifications.

This guide provides detailed instructions for installing, operating, and configuring BAPI Wireless Receiver and Digital Output Modules. It covers sensor pairing, module mounting, network extension, troubleshooting, specifications, and configuration utilities for BACnet and Modbus protocols.

Comprehensive guide for installing, operating, and configuring BAPI Wireless Receiver and Digital Output Modules, including BACnet IP, BACnet MS/TP, and Modbus RTU modules. Covers setup, pairing, mounting, wiring, switch settings, diagnostics, and configuration utilities.

Installation and operating instructions for the BAPI 52374 Temperature and Humidity Pendant Sensor, detailing its features, mounting, wiring, specifications, and troubleshooting.

Comprehensive guide to installing and operating BAPI's wireless receiver and analog output modules (ROM, VOM, SOM, RYOM), covering pairing, mounting, wiring, and specifications for building automation systems.

Installation guide for the BAPI Water Leak Detector Power Adaptor Board, detailing how to power BAPI's Water Leak Detectors using AC voltage. Includes overview, step-by-step installation instructions, and technical specifications.

Detailed installation and operating instructions for the BAPI 900 MHz Wireless Food Temperature Probe (Model WFP900). Covers product overview, setup, maintenance, cleaning, troubleshooting, and FCC compliance.

Comprehensive guide for installing and operating the BAPI Refrigerant Leak Detector, an area monitor for detecting a wide range of refrigerants. Covers identification, mounting, wiring termination, operational procedures, sensor replacement, diagnostics, and technical specifications.