NOTIFIER UDACT-2 Universal Digital Alarm Communicator Transmitter User Manual

This user manual details the Notifier UDACT-2 Universal Digital Alarm Communicator Transmitter, a device that transmits system status to Central Station Receivers via the public switched telephone network. It can report up to 2,040 points and be programmed for a variety of types, including fire, waterflow, and supervisory. Learn more about the UDACT-2's capabilities and programming in this comprehensive guide.

SIEMENS FCA2015-U1 Serial Digital Alarm Communicator Transmitter Instruction Manual

This user manual provides instructions for the SIEMENS FCA2015-U1 Serial Digital Alarm Communicator Transmitter. It includes information on programming features and options to comply with UL 864 and CAN/ULC-S527 standards. Learn about permitted settings for periodic tests, programming range, and digital communication format.

POTTER UDACT-9000 Universal Digital Alarm Communicator Transmitter Owner’s Manual

Learn about the features and engineering specifications of the POTTER UDACT-9000 Universal Digital Alarm Communicator Transmitter with this owner's manual. Discover how it transmits point identification for alarm, trouble, and supervisory conditions and can be programmed with SIA or Contact ID reporting formats. Compatible with PFC-9000 series fire alarm control panels, the UDACT-9000 is UL listed and capable of supervising phone lines for reliable reporting to monitoring stations.

POTTER DACT-5000 Digital Alarm Communicator Transmitter Owner’s Manual

Learn all about the DACT-5000 Digital Alarm Communicator Transmitter with this user manual. Discover how it supervises phone lines, reports conditions and mounts in fire alarm cabinets. Simplistic programming is made easy with the CFG-5000 tool.

POTTER UD-2000 Digital Alarm Communicator Transmitter Instruction Manual

Learn how to install and operate the POTTER UD-2000 Digital Alarm Communicator Transmitter with this comprehensive user manual. Follow the wiring diagrams and guidelines to ensure your system operates as intended. The DACT communicates using SIA-DCS or Ademco Contact ID protocols and provides up to two phone lines for communication to a monitoring station. Keep your phone lines separate from other circuits and use 26 AWG or larger wire conductors.

EDWARDS 2010-2-DACT Digital Alarm Communicator Transmitter Installation Guide

Learn how to install and use the EDWARDS 2010-2-DACT Digital Alarm Communicator Transmitter with this installation sheet. This transmitter uses Contact ID protocol and can report events to up to six central monitoring stations. Optional GPRS board available.