3D Manuals & User Guides

Endeavour Fires 3D Media Wall Inset Electric Fireplace Instruction Manual

November 17, 2023

Remove the Front Glass Panel before Installation  Remove the two screws and the glass retaining strip as shown below. Unscrew the four ST4*8 screws on both sides of the appliance, and remove the top brackets as shown below, ensuring the…

Brand: Endeavour Fires

LeapFrog 3D Learning System User Guide

November 14, 2023

LeapFrog 3D Learning System Product Information Product Name: [Product Name] Application Guide: Yes Details: Animation brings the books to life Enhance the learning with amazing 3D-like animations. Amazing 3D-like animations enhance the learning and help kids better understand the learning…

Brand: LeapFrog

ANYCUBIC 3D Printer Wash and Cure Max Station Instruction Manual

November 11, 2023

ANYCUBIC 3D Printer Wash and Cure Max Station Dear customer Thank you for choosing Anycubic products. Please read this instruction carefully. The installation techniques and precautions in the instruction can help you avoid any unnecessary damage or frustration. Please visit…

Brand: Anycubic

LC-dolida 3D Bluetooth Sleep Mask User Manual

November 9, 2023

LC-dolida 3D Bluetooth Sleep Mask User Manual PACKAGE CONTENTS 1 * Bluetooth Sleep Mask 1 * Portable Carrying Bag 1 * USB C Cable 1 * User Manual PRODUCT SPECIFICATIONS Brand:LC-dolida Bluetooth Name: LC-dolida Bluetooth Version: 5.2 External Charging: DC5V/1A…

Brand: LC-dolida

GINGKO 3D Amber Crystal Light User Manual

September 5, 2023

GINGKO 3D Amber Crystal Light User Manual NOTE: DO NOT LEAVE THIS PRODUCT IN DIRECT SUNLIGHT Thank you for your purchase of the Gingko Amber Crystal Light. Please read the instruction manual carefully to achieve the best performance of this…

Brand: Gingko

eSUN 3D Printer Filament User Guide

August 16, 2023

eSUN 3D Printer Filament User Guide PLA Series（including PLA+ / Color Changing / Wood / eSmooth / eBamboo / PETG） Applicable Printer: General Printing Temp.190-220℃ Bed Temp. 60～80℃ （BuildTak/Kapton Tape Recommended）. For better modelling effect, please use Blue Masking Tape…

Brand: eSUN

GOLD HUNTER BLACK MAMBA – LRL + 3D Instructions

August 16, 2023

BLACK MAMBA - LRL + 3D Product Information The Black Mamba is a rectangular sensor equipped with 3D imaging capabilities. It is designed to provide accurate and detailed scanning results. Key Features: 3D imaging technology Rectangle sensor design Bluetooth connectivity…

Brand: GOLD HUNTER

KAVAN 3D Aerobatic model Instruction Manual

July 2, 2023

KAVAN 3D Aerobatic model Product Information Product Name: SAVAGE MAX Introduction: The SAVAGE MAX is a high-performance 3D aerobatic model made from virtually unbreakable EPP foam. It features a brushless motor and lightweight LiPo battery for powerful performance. This model…

Brand: KAVAN

TOOLOTS 3D Printer Machine Instructions

June 2, 2023

3D Printer Instructions and Precautions 3D Printer Machine This manual describes the operation precautions of 3D printer. Please read it carefully and abide by the corresponding specifications. Improper use of equipment may cause damage and even personal injury. Equipment Parameters…

Brand: TOOLOTS

ALLEVI 3D Printers and Associated Equipment User Manual

April 30, 2023

MASTER TERMS AND CONDITIONS OF SALE User Manual 3D Printers and Associated Equipment Please read the following carefully. These Master Terms and Conditions, together with the Product Warranty Information document attached hereto (collectively, the “Terms”) form a legally binding agreement…

Brand: Allevi