3D Scanner Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for 3D Scanner products.

Tip: include the full model number printed on your 3D Scanner label for the best match.

3D Scanner manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

Creality Sermoon P1 3D Scanner User Manual

November 18, 2026
Creality Sermoon P1 3D Scanner Setup & Use Power-on preparation: Ensure sufficient power. Before charging, select the appropriate connector for your country and push it into the adapter body (adapter body prongs are fixed). Turn on: Press and hold the…

ELEGOO M1 Ultra 3D Scanner User Manual

November 16, 2026
ELEGOO M1 Ultra 3D Scanner Specifications M1 Ultra Scanning Mode High-Speed Scanning Detailed Scanning Deep-Hole Scanning NIR Marker less Scanning Light Source  34 Blue Crossed Laser Lines  7 Blue Parallel Laser Lines  Single Blue Laser Line NIR (Infrared Binocular Structured…

Artec 3D Micro II Advanced v2.5 User Manual

November 3, 2026
Artec 3D Micro II Advanced v2.5 Micro II — Safety, intended use, and installation overview The Artec Micro II is an optical 3D scanner intended for safe operation when used as specified and by trained personnel. The manual provides safety…

3DEVOK MT 3D Scanner User Guide

October 10, 2026
3DEVOK MT 3D Scanner Product List Device Introduction Device Interaction Instructions Trigger Button Power On: With the device off, press and hold the button for 2 seconds to power on. Normal Power Off: With the device on, press and hold…

Creality P1 Creality Sermoon 3D Scanner User Guide

September 23, 2026
Creality P1 Creality Sermoon 3D Scanner SPECIFICATIONS Hardware Parameters Creality Sermoon P1 Scanning Mode Single Blue Laser Line 7 Parallel Blue Laser Lines 22 Cross Blue Laser Lines Close-Range Infrared Structured Light Long-Range Infrared Structured Light Accuracy Up to 0.02mm[1]…

VOXMETA H1 Pro 3D Scanner User Guide

September 1, 2026
VOXMETA H1 Pro 3D Scanner Package Contents Scanner Overview Wired Connection for 3D Scanner Step 1: Use the Plug Adapter Select the appropriate plug adapter based on your country or region. Insert the 3-prong power cord into the plug adapter.…

Alpha Geo L2 Pro Portable 3D Scanner User Manual

July 24, 2026
Alpha Geo L2 Pro Portable 3D Scanner Overview LixelStudio is XGRIDS’ proprietary 3D processing software for the Lixel series handheld scanners. It supports point-cloud post-processing, SLAM-based project processing, point-cloud viewing/editing, and various industry applications such as volume calculation, mesh reconstruction,…