TACTIC STAR M191 Shot Timer
Specifications
| Max single timing duration | 600 seconds (auto-stop at limit) |
|---|---|
| Max shots per group | 99 shots |
| History storage | Up to 60 groups |
| Sleep mode | Auto-enters sleep after inactivity (default: 30 minutes) |
| Delay mode options | Instant, Random (1–5s), Custom (1–10s) |
| Sensitivity range | 1–9 |
| History page display (per page) | 3 shot times and 2 split times |
| Par mode controls | Enable/disable and set parameters (details in settings) |
Troubleshooting
- Missed shots (no detection): Increase Sensitivity (Sensitivity controls how strongly the timer detects gunshots or sounds).
- False detections (unexpected triggers): Decrease Sensitivity.
- Entering power-off mode shows another screen first: When powering off, ignore the history data screen if it appears; continue holding the Right Button until the power-off confirmation screen appears, then confirm.
- Can’t exit settings: In any submenu, press the Left Button to return step by step until you exit settings.
- Need a new group after reviewing: On the Summary/Review flow, use Up/Down to start timing and begin a new group.
Quick Start Guide
Power On/Off
- Power On: Press & hold the Right Button for 4 seconds to power on.
- Power Off: Press & hold the Right Button for 4 seconds until the Power-off Confirmation screen appears (ignore the history data screen if it pops up), then confirm to power off.
- Sleep Mode: The device will automatically enter sleep mode after a period of inactivity. Press any button to wake it up. (Default: 30 minutes)

Start/Stop Timing

Summary Page
Review the Data of Current Group
On the Summary Page, press the Right Button to review the current group data.


Check History Data
- Press & hold the Right Button for 3 seconds on the main screen.
- Use Up / Down to select a group; press Right to view details.
- Each page shows 3 shot times and 2 split times; scroll pages to view more data.
- Press Left to exit, choose whether to delete history when exiting.
- Storage Capacity: Up to 60 groups. Up to 99 shots per group.

Advanced Settings
Exit Setting
In any submenu, press the Left Button to return step by step until exiting settings.
Set Sensitivity
- Adjusts how strongly the timer detects gunshots or sounds. Increase sensitivity if shots are missed. Decrease sensitivity if false detections occur.
- Path: Main Screen → Y Settings → Y Sensitivity → Y Adjust Level Sensitivity Range: 1—9

Recommended Settings:
Rifle / Shotgun: Level 4; Pistol (9mm): Level 5; Airsoft: Level 8
Set Delay Mode
Sets a waiting time before timing starts.
Path: Main Screen → Settings → Delay → Select Mode (Instant / Random / Custom)

Set Par Mode
- Par Mode is used for fixed-time repetitive training sessions.
- Path: Home Page → Y Settings → Y Par Mode → Enable/Disable Par Mode or Set Parameters
- Enter the Par Mode settings page to turn Par Mode on or off.
- Quick Enable / Disable Par Mode
- From the home page, press the left and right buttons simultaneously to enable PAR Mode (with a prompt sound).
- The left status bar will display “Par: ON”.
- Press the left and right buttons simultaneously again to disable PAR Mode.
- The status bar will display “Par: OFF”.

Set Volume & Auto-Off
Path: Main Screen → Settings → Y System → Y Select Volume/Auto-off.

Bluetooth Function
Path: Main Device Type (APP/Shot Cam)
This timer supports Bluetooth connection with:
- Third-party training devices (e.g., ShotCam)
- PractiScore 2 App

IMPORTANT NOTICE
Do not pair the timer through your phone’s Bluetooth settings.
To connect the timer to the mobile app:
- On the timer, enter the BLE settings page, choose APP, then press and hold the Right Button to confirm the selection.
- Open the mobile app.
- Complete the Bluetooth connection within the app.
Connect to PractiScore 2
Please scan the QR code to watch the video tutorial.

Installation Guide
Belt Clip (6-10mm Belt)
- Install the Belt Clip
Align the belt clip with the guide rail on the back of the timer. Slide it in until you hear a “click”, indicating it is securely installed.
- Remove the Belt Clip
Gently pry the bottom latch upward, then slide the belt clip out to remove it.
Accessory Expansion Function
Supports connection with third-party devices (such as ShotCam) to expand training applications. More features are currently under development.

Product Contents
About Company
- service@tacticstar.com
- www.tacticstar.com
- Designed by INTECH INTERACTIVE
Documents / Resources
![]() | M191 Shot Timer |
References
- facebook.com/profile.php?id=61584128289992www.facebook.com
- tacticstar.comwww.tacticstar.com
- User Manualmanual.tools

