SYNCO XView M4 Mobile Monitor User Manual

1. Bluetooth Shutter / Aspect Ratio Adjustment Button
2. Screen Mirror / Rotation Button
3. Volume / Brightness + Button
4. Volume / Brightness – Button
5. Power On/Off Toggle
6. TYPE-C Charging Port
7. Speaker

Installation

Attach the magnetic ring to the back of your phone. Align the
magnet area on the back of the M4 with the magnetic ring and let it
attach into place.

Operations

Charging: Use a Type-C cable to charge the
device. (5V2A)
Power On/Off: Power On: Slide the power toggle
to the right. Power Off: Slide the power toggle to the left.

Phone Pairing: Swipe down from the top-right
corner of your phone screen to open the control center.
1. Screen Projection:
  1. Enable the screen projection function (Android: Wireless
    Projection, iOS: Screen Mirroring) on your phone.
  2. Click to connect the device (SYNCO-XXXX).
2. Camera Control:
  1. Enable Bluetooth on your phone.
  2. Click to connect the Bluetooth device (SX-XXX).
Bluetooth Shooting: Connect your phone via
Bluetooth, open the camera, and short press the shutter button to
shoot or record.

Aspect Ratio Adjustment: Long press the aspect
ratio adjustment button to switch between full-screen and standard
aspect ratios.
Screen Mirroring: Short press the mirror
button to flip the screen horizontally.

Volume Adjustment: Short press the volume + /
– button to increase or decrease the volume (3 levels).
Brightness Adjustment: Long press the
brightness + / – button to increase or decrease brightness (3
levels).

FAQ

Q: How do I charge the device?

A: Use a Type-C cable to charge the device with a power source
that provides 5V2A.

Q: How do I adjust the volume and brightness?

A: Short press the volume + / – button to adjust the volume and
long press the brightness + / – button to adjust brightness.

“`

View Fullscreen

XView M4 Mobile Monitor
User Manual
Thank you for choosing SYNCO product. Please read this manual carefully before use and follow all instructions mentioned herein.

Caring For Your SYNCO Product
· Please keep the product in a dry, clean, dust-free environment. · Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage. · Use only a soft and dry cloth for cleaning the product. · Malfunction may be caused by dropping, impact of external force. · Do not attempt to disassemble the product. Doing so voids warranty. · Please have the product checked or repaired by authorized technicians if any
malfunctions happened. · Failure to follow all the instructions may result in mechanics damage. · Warranty does not apply to human errors.
Product Introduction
1. Bluetooth Shutter / Aspect Ratio Adjustment Button 2. Screen Mirror / Rotation Button 3. Volume / Brightness + Button 4. Volume / Brightness – Button 5. Power On/Off Toggle 6. TYPE-C Charging Port 7. Speaker

Installation
Attach the magnetic ring to the back of your phone. Align the magnet area on the back of the M4 with the magnetic ring and let it attach into place.
Operations
1. Charging Use a Type-C cable to charge the device. (5V2A) 2. Power On/Off Power On: Slide the power toggle to the right. Power Off : Slide the power toggle to the left.

3. Phone Pairing Swipe down from the top-right corner of your phone screen to open the control center.
3.1 Screen Projection (1). Enable the screen projection function (Android: Wireless Projection, iOS: Screen
Mirroring) on your phone. (2). Click to connect the device (SYNCO-XXXX). 3.2 Camera Control (1). Enable Bluetooth on your phone. (2). Click to connect the Bluetooth device (SX-XXX). 4. Bluetooth Shooting Connect your phone via Bluetooth, open the camera, and short press the shutter button to shoot or record.
Short Press
5. Aspect Ratio Adjustment Long press the aspect ratio adjustment button to switch between full-screen and standard aspect ratios.
Long Press

6. Screen Mirroring Short press the mirror button to flip the screen horizontally.

Short Press
7. Screen Rotation Long press the rotation button to rotate the screen 180° clockwise.

8. Volume Adjustment Short press the volume + / – button to increase or decrease the volume (3 levels).
9. Brightness Adjustment Long press the brightness + / – button to increase or decrease brightness (3 levels).

Long Press Short Press Long Press

Specification
Transmission Range Battery Power Consumption Display Charging Port Case Material Runtime

50m 3.7V / 1300mAh 1.75W 3.97 Inch Type-C Plastic 3H

Packing List

M4 Mobile Monitor x1 Magsafe Ring Sticker x1 Charging Cable x1
Warranty
Warranty Period Thank you for purchasing SYNCO products. 1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product. 2. Original SYNCO products are entitled to 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the first end-user. Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).
Warranty Exclusions and Limitations Faults resulted from inappropriate use of a product without following its operation specification 1. Artificial damage, e.g. crash, squeeze, scratch, or soaking 2. Modifications to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of element or circuit, label alteration 3. The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off

4. All consumable accessory attached to a product, like cable, wind muff, battery 5. Faults as a result of force majeure, such as fire, flood, lightning, etc. Warranty Claim Procedure 1. If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO’s customer service through email at support@syncoaudio.com. 2. Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided. 3. If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.
Guangzhou Zhiying Technology Co., Ltd Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue, Liwan District, Guangzhou, China, 510000 support@syncoaudio.com www.syncoaudio.com

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Documents / Resources

SYNCO XView M4 Mobile Monitor [pdf] User Manual
2AXWL-XVIEWM4, 2AXWLXVIEWM4, xviewm4, XView M4 Mobile Monitor, XView M4, Mobile Monitor, Monitor

References

User Manual

SYNCO XView M4 Mobile Monitor User Manual

XView M4 Mobile Monitor

Specifications

Product Usage Instructions

Caring For Your SYNCO Product

Product Introduction