Kitambua Halijoto cha UB-H2S-I1 Wifi
“
Vipimo vya Bidhaa
- Mfano: UB-H2S-I1
- Ugavi wa Nguvu: DC 10~30V
- Upeo wa Sasa: 917mA @ 12V
- Masafa ya Kupima: 0 ~ 100ppm
- Usahihi: -20~50°C, 15~90%RH
- Azimio: Sauti
- Wakati wa Kuongeza joto: 3m
- Muda wa Majibu: Itifaki ya RS485 Modbus RTU
- Mazingira ya Kazi: Anwani ya RS485
- Urefu wa Kebo ya Kiunganishi: 3m
- Itifaki ya Mawasiliano: RS485 Modbus RTU
Itifaki - Kiwango cha Baud: 1200 bit/s, 2400 bit/s, 4800 bit/s,
9600 bit/s (chaguo-msingi), 19200 bit/s
Maagizo ya Matumizi ya Bidhaa
Maagizo ya Wiring
Fuata mchoro wa wiring uliotolewa kwenye mwongozo wa mtumiaji
correctly connect the device to the power supply and communication
kiolesura.
Itifaki za Mawasiliano
Configure the communication parameters as follows:
- Mfumo wa Usimbaji: Kidogo cha Data, Kidogo cha Kukagua Usawa, Stop Bit, Hitilafu
Kuangalia, Kiwango cha Baud - Data Frame Format: Modbus-RTU protocol with specific structure
details as mentioned in the manual. - Register Address: Address values and corresponding descriptions
are provided for reference.
Tahadhari za Matumizi
- Avoid installation in strong convective air environments.
- Epuka kugusa vimumunyisho vya kikaboni, rangi, kemikali, mafuta,
na gesi zilizojaa sana. - Avoid prolonged exposure to corrosive gases as they can damage
sensor. - Epuka uhifadhi wa muda mrefu katika viwango vya juu vya kikaboni au
gesi za alkali.
Maswali Yanayoulizwa Mara Kwa Mara (FAQ)
Swali: Ni usambazaji gani wa umeme unaopendekezwa kwa kifaa?
A: The device operates on a DC power supply ranging from 10V to
30V.
Q: How can I adjust the device on-site?
A: The device comes with a level and adjusting handwheel for
easy on-site adjustments.
Swali: Ni itifaki gani ya mawasiliano inayotumiwa na kifaa?
A: The device uses RS485 Modbus RTU Protocol for
mawasiliano.
"`
Utangulizi wa Bidhaa
The sensor adopts professional hydrogen sulphide concentration sensor probe as the core detecting device; it has the characteristics of wide measuring range, high precision, good linearity, good versatility, easy to use, easy to install, long transmission distance and moderate price.
Use Case Scenarios Widely used in chemical plants and other gas leakage detection.
Vipengele 1. Kipokezi cha picha cha usahihi cha juu, unyonyaji wa juu katika masafa kamili ya wigo. 2. Inakuja na kiwango na kurekebisha handwheel, rahisi kurekebisha kwenye tovuti. 3. Kifuniko cha vumbi cha uwazi sana na unyeti mzuri na matibabu maalum ya uso ili kuzuia vumbi
adsorption.
Vipimo vya Bidhaa
Masafa ya Kupima ya Sasa ya Ugavi wa Nishati
Accuracy Resolution Warm-up Time Response Time Working Environment Connector Cable Length Communication Protocol RS485 Address Baud Rate
Specifications UB-H2S-I1 DC 10~30V
917mA@12V 0~100ppm
±2ppm±10% 1ppm 5 min 35 s
-20~50, 15~90%RH Sauti 3m
Itifaki ya RS485 Modbus RTU 0xC9
1200 bit/s, 2400 bit/s, 4800 bit/s, 9600 bit/s (chaguo-msingi), 19200 bit/s
Maagizo ya Wiring
Itifaki za mawasiliano
1. Vigezo vya msingi vya mawasiliano
Kidogo cha Data ya Mfumo wa Usimbaji
Usawa wa Kuangalia Bit Stop Bit
Hitilafu katika Kukagua Kiwango cha Baud
Kigezo cha Msingi cha Mawasiliano 8bit binary 8 biti hakuna 1 biti CRC Angalia
1200 bit/s, 2400 bit/s, 4800 bit/s, 9600 bit/s (chaguo-msingi), 19200 bit/s
2. Muundo wa Muundo wa Data
Itifaki ya mawasiliano ya Modbus-RTU inatumika katika umbizo lifuatalo:
Muundo wa awali baiti 4 kwa wakati.
Msimbo wa anwani: 1 byte, chaguo-msingi 0xC9.
Msimbo wa utendakazi: baiti 1, msimbo wa utendakazi wa usaidizi 0x03 (kusoma pekee) na 0x06 (soma/andika).
Eneo la data: N ka, data ya 16-bit, byte ya juu huja kwanza.
Ukaguzi wa hitilafu: msimbo wa CRC wa biti-16.
Maliza muundo baiti 4 za wakati.
Ombi
Anwani ya Mtumwa
Rejesta ya Msimbo wa Kazi Anuani Nambari ya Rejesta
CRC LSB
CRC MSB
1 baiti
1 baiti
2 ka
2 ka
1 baiti
1 baiti
Jibu
Msimbo wa Kazi wa Anwani ya Mtumwa Nambari ya Maudhui ya Baiti 1 Maudhui 1
…
Maudhui n
CRC
1 baiti
1 baiti
1 baiti
2 ka
2 ka
…
2 ka
2 ka
3. Anwani ya Kujiandikisha
Address 0x0000 0x07D0
0x07D1
Content H2S value Address
Kiwango cha Baud
Anwani ya Kujiandikisha
Sajili Msimbo wa Kazi ya Urefu
1
03
1
03/06
1
03/06
Maelezo ya ufafanuzi Nambari 1255
0:2400, 1:4800, 2:9600, 3:19200, 4:38400, 5:57600, 6:115200, 7:1200
NOTE 1. Do not install the equipment in a strong convective air environment. 2. Avoid contact with organic solvents (including silicone and other adhesives), paints, chemicals, oils
and highly concentrated gases. 3. The device should not be used for a long time in the environment containing corrosive gases,
corrosive gases will damage the sensor. 4. Do not place the device for a long time in a high concentration of organic gases, long-term
placement will lead to sensor zero point drift, and slow recovery. 5. Prohibit long time storage and use in high concentration alkaline gas.
Nyaraka / Rasilimali
 |
UBIBOT UB-H2S-I1 Wifi Temperature Sensor [pdf] Mwongozo wa Mtumiaji WS1, WS1 Pro, UB-H2S-I1, UB-H2S-I1 Wifi Temperature Sensor, UB-H2S-I1, Wifi Temperature Sensor, Temperature Sensor, Sensor |