Introduction
This guide provides detailed instructions for the installation and setup of the SALTO NCoder. It covers essential procedures such as connecting the device via USB or Ethernet, configuring communication modes, and performing initial setup steps.
Key Features and Setup
- Connection Options: Supports both USB and Ethernet connections for versatile integration.
- Communication Modes: Easily switch between USB and Ethernet communication modes as needed.
- Desktop Reader Mode: Learn how to configure the NCoder for Desktop Reader mode using the Space software.
- Electrical and RF Characteristics: Find detailed specifications for operating temperature, humidity, RFID frequency, and Bluetooth Smart frequency.
- Power Consumption: Information on power usage for both USB and Ethernet connections.
- Cable Requirements: Details on the necessary Ethernet and USB cables.
Operational Procedures
- USB Connection: Step-by-step instructions for connecting the NCoder via USB and initializing it.
- Ethernet Connection: Guidance on setting up the NCoder for Ethernet communication, including DHCP and static IP configurations.
- DIP Switch Setup: Information on configuring DIP switches for various operational needs.
- Initialization and Reset: Procedures for initializing the NCoder in Space and performing a factory reset.
- Maintenance: Instructions on how to clean and maintain the NCoder's sensor for optimal performance.
- Signalling: A comprehensive table detailing the meaning of different light and buzzer signals for status indication.
For detailed technical specifications and troubleshooting, refer to the complete SALTO NCoder documentation.
