SR-CS9033A-PIR-D Casambi Wireless Sensor
“
Specifications:
- Power Supply: 12-24VDC
- Power Consumption: Max. 30mA
- Wireless Communication: 2.4GHz ISM band
- Radio Range: 164 feet (50m) in open field
- Safety Certification: cULus Listed, CE
- Operating Temperature Range: -20 to 40°C
- Operating Humidity: 0-95% (non-condensing)
Product Usage Instructions:
Function Introduction:
The IP65 motion sensor combines presence sensing, daylight
harvesting, DALI dimming, and Casambi radio technology. It works
with DALI LED drivers or luminaires connected to mains power,
enhancing occupant comfort and energy savings.
Casambi Technology:
Casambi technology creates a mesh network with no single point
of failure. Each node replicates system intelligence, allowing
units to catch up when offline.
Wireless Features:
- Control Marking Terminals: VCC(12-24V), GND/DA-DALI, No
connection, DA+DALI - Wireless Communication: 2.4GHz ISM band
- Radio Range: 164 feet (50m) in open field
Lighting Control Features:
- DALI broadcast, Individual/group addressing, Scene control
- Autonomous sensor-based control, Scheduler control
Sensing:
- Occupancy Sensing Type: Lux Detection
- Detection Range: Varies based on installation height &
patterns - Detection Angle/Range: Slow movement (<1.0’/s) and Quick
movement (>1.3’/s)
Product Dimension:
36.5mm x 29mm x 42.7mm x 5.7mm
Installation Precautions:
Ensure correct polarity for DALI signal connection. Follow
wiring diagram for accurate installation.
Frequently Asked Questions:
Q: What is the range of the wireless communication?
A: The wireless communication has a range of 164 feet (50m) in
an open field.
Q: Can the sensor work with DALI LED drivers?
A: Yes, the sensor can work with DALI LED drivers or luminaires
connected to mains power.
Q: What is the operating temperature range of the sensor?
A: The operating temperature range is from -20 to 40°C.
“`
Casambi Wireless IP65 ZHAGA 18 PIR Sensor + Light Sensor + DALI Dimming
IC
Important: Read All Instructions Prior to Installation Function introduction
1 23 4
Zhaga Receptacle Accessory(optional for order)
1 Port 1 (Brown): VCC(12-24V) 2 Port 2 (Gray): GND/ DA-DALI signal
3 Port 3 (Blue): No connection 4 Port 4 (Black): DA+DALI signal
1 2 3 4
Lead Wire
Lock-nut Receptacle Body Gasket
Product Description
The IP65 motion sensor combines presence sensing, daylight harvesting, DALI dimming and Casambi radio technology. The sensor can work with DALI LED drivers or luminaires, the luminaires just need to be connected to mains power. The result is increased occupant comfort and significant energy savings that meet the most demanding building energy codes. The sensor is suitable for low bay applications which need sensor based automation.
Casambi Technology Explained
The Casambi technology provides a mesh network where all the intelligence of the system is replicated in every node and, in such a way, creates a system with no single point of failure. In this kind of fully distributed architecture, any unit can go offline and catch up from others when they return back online.
Wireless Features
· Control a large number of fixtures from any point · Simple to use UI · Wide range of functionality Grouping Luminaires, different lighting situations for different occasions, colour temperature, daylight sensor, occupancy sensor and much more.
Key Features · PIR motion detection · Daylight harvesting · Works with DALI drivers or luminaires, broadcast control · Autonomous sensor-based control · Can be use for outdoor applications · ZHAGA Book 18 socket
Benefits · Cost-effective solution for energy savings · Energy code compliance · Robust mesh network
Applications · Warehouses · Factories · Street and Area Lighting · Outdoor Luminaires – Wall Packs Parking Lots – Walkways · Photo Controls · Central Management System
Product Data Electrical Information
Power Supply Power Consumption
Control Marking Terminals Status Indicators
Wireless Communication Transceiver Frequency Radio Range Radio Certification
Lighting Control
Features
12-24VDC Max. 30mA
DALI-2 V+,DA-, DA+ Red (motion detection)
2.4GHz ISM band 164 feet (50m) in open field
FCC/IC, CE
DALI broadcast, Individual/group addressing, Scene control Autonomous sensor-based control, Scheduler control
Sensing Occupancy Sensing Type Lux Detection Range Mounting Height Detection Angle/Range
Environment Operating Temperature Range Operating Humidity Safety Certification
PIR sensor 0-1000 Lux Up to 17m, recommended height: 12-15m 360° (ceiling)/18m(diameter)
-20 to 40 0-95% (non condensing)
cULus Listed, CE
Detection Pattern
Coverage Side View
0m
8m
12m
17m
8m
4m
2m
0
2m
4m
8m
The detection area for movement sensor can be roughly divided into two parts:
Slow movement (person moving < 1.0’/s or 0.3m/s)
Quick movement (person moving > 1.3’/s or 0.4m/s)
Coverage Top View
9m
6m
3m
1m
0
18m
1m
3m
6m
9m 9m 6m 3m 1m 0 1m 3m 6m 9m
Detection Area
Note: 1) Following different detection areas are based on different installation heights & patterns. 2) Detection Pattern is a relevant value, the performance should depends on the site conditions (installation height/ temperature/ sunlight/ humidity/ Blind area…etc)
17m
Detection pattern at 17m height
9m 6m 3m 0m 3m 6m 9m Detection pattern at 17m height
Application
Wiring Diagram
OUTPUT
L
INPUT
N
12/24V
V+
G
CV PSU
V-
DA-
DA+
DA+ DALI PS DA-
DALI Line
DT6 Control Gear
DT8 Control Gear
Note: please make sure the polarity of DALI signal of the sensor is correctly connected.
Product Dimension
36.5
29
42.7
5.7
Indoor Low/High-bay Application
Outdoor Application
Ø47.4
Installation Precautions
· Avoid areas with frequent temperature changes: Keep away from air conditioners, fans, refrigerators, ovens, and other objects that cause rapid temperature changes. The detection effectiveness of PIR motion sensors is closely related to temperature fluctuations, and vents or heat sources can lead to false alarms.
· Avoid areas with significant air flow. · Avoid facing glass doors and windows directly: 1) Do not face glass doors and windows directly to avoid
interference from strong light. 2) Avoid complex environments outside doors and windows, such as direct sunlight, crowds, and moving vehicles. · Avoid installing opposite large, constantly moving objects: Large objects with significant motion can cause sudden changes in airflow within the detection area, leading to false alarms. Outdoor PIR motion sensors should not be installed opposite large trees or tall bushes. · Avoid areas with screens, furniture, large potted plants, or other obstacles within the detection range. · Avoid areas exposed to direct sunlight.
Documents / Resources
 |
Sunricher SR-CS9033A-PIR-D Casambi Wireless Sensor [pdf] User Guide SR-CS9033A-PIR-D, SR-CS9033A-PIR-D 15m, SR-CS9033A-PIR-D Casambi Wireless Sensor, SR-CS9033A-PIR-D, Casambi Wireless Sensor, Wireless Sensor, Sensor |