Casambi Wireless IP65 ZHAGA 18 PIR Sensor + Light Sensor + DALI Dimming
Important: Read All Instructions Prior to Installation
Function Introduction
The sensor is designed for wireless lighting control, integrating presence sensing, daylight harvesting, DALI dimming, and Casambi radio technology. It is suitable for low bay applications requiring sensor-based automation and offers significant energy savings.
1 Port 1 (Brown): VCC (12-24V)
2 Port 2 (Gray): GND / DA- (DALI signal)
3 Port 3 (Blue): No connection
4 Port 4 (Black): DA+ (DALI signal)
(Diagram showing lead wire, lock-nut, receptacle body, and gasket)
Product Data
Electrical Information
- Power Supply: 12-24VDC
- Power Consumption: Max. 30mA
- Control: DALI-2
- Marking Terminals: V+, DA-, DA+
- Status Indicators: Red (motion detection)
Wireless Communication
- Transceiver Frequency: 2.4GHz ISM band
- Radio Range: 164 feet (50m) in open field
- Radio Certification: FCC/IC, CE
Lighting Control
- Features: DALI broadcast, Individual/group addressing, Scene control, Autonomous sensor-based control, Scheduler control
Sensing
- Occupancy Sensing Type: PIR sensor
- Lux Detection Range: 0-1000 Lux
- Mounting Height: Up to 17m, recommended height: 12-15m
- Detection Angle/Range: 360° (ceiling) / 18m (diameter)
Environment
- Operating Temperature Range: -20°C to 40°C
- Operating Humidity: 0-95% (non condensing)
- Safety Certification: cULus Listed, CE
Product Description
The IP65 motion sensor combines presence sensing, daylight harvesting, DALI dimming, and Casambi radio technology. It is designed to work with DALI LED drivers or luminaires, requiring only mains power connection. This integration leads to increased occupant comfort and significant energy savings, meeting stringent building energy codes. The sensor is particularly suitable for low bay applications that require sensor-based automation.
Casambi Technology Explained
Casambi technology utilizes a mesh network where system intelligence is distributed across every node. This fully distributed architecture ensures that any unit can go offline and synchronize with others upon returning online, creating a robust system with no single point of failure.
Wireless Features
- Control a large number of fixtures from any point.
- Simple to use User Interface (UI).
- Wide range of functionality: Grouping Luminaires, different lighting situations for different occasions, color temperature, daylight sensor, occupancy sensor, and more.
Key Features
- PIR motion detection
- Daylight harvesting
- Works with DALI drivers or luminaires, broadcast control
- Autonomous sensor-based control
- Can be used for outdoor applications
- ZHAGA Book 18 socket
Benefits
- Cost-effective solution for energy savings.
- Energy code compliance.
- Robust mesh network.
Applications
- Warehouses
- Factories
- Street and Area Lighting
- Outdoor Luminaires - Wall Packs - Parking Lots - Walkways
- Photo Controls
- Central Management System
Detection Pattern
The detection area for movement sensor can be roughly divided into two parts:
(Diagrams illustrating coverage side view and coverage top view, showing detection patterns for slow and quick movements)
Note: The detection areas are based on installation heights and patterns. Performance may vary based on site conditions like installation height, temperature, sunlight, humidity, and blind areas.
Wiring Diagram
(Diagram showing wiring connections for a 12/24V CV PSU, DALI PS, DT6 Control Gear, and DT8 Control Gear, with connections for DA-, DA+, and input power.)
Note: Please ensure the polarity of the DALI signal of the sensor is correctly connected.
Product Dimension
(Diagram showing the product dimensions with measurements.)
Installation Precautions
- Avoid areas with frequent temperature changes: Keep away from air conditioners, fans, refrigerators, ovens, and other objects that cause rapid temperature changes. The detection effectiveness of PIR motion sensors is closely related to temperature fluctuations, and vents or heat sources can lead to false alarms.
- Avoid areas with significant air flow.
- Avoid facing glass doors and windows directly: 1) Do not face glass doors and windows directly to avoid interference from strong light. 2) Avoid complex environments outside doors and windows, such as direct sunlight, crowds, and moving vehicles.
- Avoid installing opposite large, constantly moving objects: Large objects with significant motion can cause sudden changes in airflow within the detection area, leading to false alarms. Outdoor PIR motion sensors should not be installed opposite large trees or tall bushes.
- Avoid areas with screens, furniture, large potted plants, or other obstacles within the detection range.
- Avoid areas exposed to direct sunlight.
Application
(Images showing Indoor Low/High-bay Application and Outdoor Application with IP65 rating)
