Sunmi N4Z6A NFC and MSR Scanner Modular Owner's Manual

Due to product update, certain details of this document may be inconsistent with the product, and the
real device shall prevail. SUNMI owns the interpretative right of this document, and reserves the right to modify this user guide without prior notice.

Declaration

The company is not responsible for the following actions:

Damage caused by use and maintenance without the conditions described in this guide.
The company will not be responsible for any damages or problems caused by the alternatives or consumables (not the original products or approved products provided by the company).

Without consent of the It is not authorized to make product modifications or changes.
The operating system of this product only supports official system If the user uses a thirdparty ROM system to update the device or modifies the system files by cracking, it may lead to system instability and may bring safety risks and threats.

FCC compliance statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving
Increase the separation between the equipment and
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.

ISED Canada compliance statements

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interf- erence that may cause undesired operation of the device.

CAN ICES-003 (B)/NMB-003(B)

EU regulatory conformance

Hereby, Shanghai Sunmi Technology Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://developer.sunmi.com/docs/read/en-US/maaeghjk480 UK PSTI SoC Website: https://developer.sun- mi.com/docs/read/en-US/xcdaeghjk480

RESTRICTIONS OF USE

This product may be used in the following European member states subject to the following restrictions. For products that operate in the frequency band 5150 – 5350 MHz & 5945-6425 MHz wireless access systems (WAS), including radio local area networks (RLANs), shall be restricted to indoor use.

EU Representative :SUNMI France SAS 186,avenue Thiers,69006 Lyon,France
This symbol means that it is forbidden to dispose the product of with normal household waste. At the end of the product life cycle, waste equipment should be taken to designated collection points, returned to the distributor when purchasing a new product, or contact your local authority representative for detailed information on WEEE recycling

RF Exposure Statement (SAR)

This equipment complies with EU, FCC and IC RSS-102 radiation exposure limits set forth for an uncontrolled

This equipment should be installed and operated with minimum distance 20cm between the radiator & your

INFORMATION ABOUT THE SOFTWARE

The description of accessories and components, including software, which allow the radio equipment to operate as intended, can be obtained in the full text of the EU declaration of conformity at the following internet address: https://develop- er.sunmi.com/docs/read/en-US/maaeghjk480.

Manufacturer: Shanghai Sunmi Technology Co., Ltd.
Address: Room 505,No.388,Song Hu Road,Yang Pu District,Shanghai,China

Documents / Resources

Sunmi N4Z6A NFC and MSR Scanner Modular [pdf] Owner's Manual
2AH25N4Z6A, N4Z6A NFC and MSR Scanner Modular, N4Z6A, NFC and MSR Scanner Modular, Scanner Modular, Modular

References

User Manual

Sunmi N4Z6A NFC and MSR Scanner Modular Owner’s Manual

Sunmi N4Z6A NFC and MSR Scanner Modular

Points for Attention

Safety Warning

Important Safety Instructions

Disclaimer