SUNCO LIGHTING 80755 Bi Level Dimming Sensor Instruction Manual
PLEASE FIND A QUALIFIED ELECTRICIAN FOR INSTALLATION. Please read the instructions before you install and use the luminaire. WARNING, CAUTIONS AND OPERATING INSTRUCTIONS
- To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels.
- Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
- If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check your local electrical code.
- Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
- Turn off electrical power at fuse or circuit breaker box before installation or performing any maintenance.
- Avoid direct eye exposure to the light source while it is on.
- For use with POWER-SELECT™ HIGH BAYS, with an installed sensor socket.
WARNING DISCONNECT POWER BEFORE INSTALLING OR SERVICING.
SENSOR INSTALLATION
- Note: a sensor effects the whole fixture.
- Remove sensor socket cover.
- Expose sensor socket.
- Plug in sensor.
- Turn clockwise to fasten sensor to the socket.
- Installation complete, see sensor operating instructions.
GENERAL WIRING DIAGRAM
SENSOR DEFAULT SETTINGS
- Trim Level: 100%
- Sensitivity: High
- Hold Time: 5 min.
- Stand-by Dim: 50%
- Stand-by Time: 30min.
- Photocell: Of
Specifications subject to change without notice. Photos and line drawings may not be to scale and are for general reference only.
Documents / Resources
 |
SUNCO LIGHTING 80755 Bi Level Dimming Sensor [pdf] Instruction Manual 80755, Bi Level Dimming Sensor, 80755 Bi Level Dimming Sensor, Dimming Sensor |
