SUBSONIC SA5639 Wireless LED Controller Instruction Manual

Charging
Before connecting for the first time, fully charge the controller’s battery. To charge the battery, connect the controller to a USB port using the supplied USB cable. The LED indicator on the front of the controller will flash slowly in orange while charging and will turn off when the charge is complete. Press and hold the PS button for 10 seconds to turn the controller off.

Connecting the controller to PS4

Turn on the console.

Connect the controller in sleep mode to one of the console’s USB ports using the USB cable provided.
Press the PS button: the controller connects and the LED indicator lights up. The controller is ready for use.

For subsequent connections, simply press the PS button on the controller, and it will automatically connect to the console. You can also wake the console by pressing the PS button after the first pairing.

Connecting the controller to the PC
Wired mode

Turn on your PC.
Connect the controller in sleep mode to one of the console’s USB ports using the USB cable provided.

Press the PS button: the controller connects and the LED indicator lights up. The controller is ready for use. It’s recognized as “Controller (Xbox 360 for Windows)” in the game controllers list.

The controller uses the X-Input protocol by default for playing the latest games. Some older games use the Direct Input protocol. To switch to Direct Input mode, hold the PS button for 5 seconds. You can switch from one mode to the other at any time using this procedure.

Wireless mode

Turn on your PC and activate Bluetooth.

In the Bluetooth settings, click “Add a new Bluetooth device”.
On the controller, press PS + SHARE at the same time for 5 seconds.

Choose “Wireless controller” from the list of available devices.
The controller connects, and the LED indicator lights up. The controller is ready for use.

The controller uses the Direct Input protocol in wireless mode.

Programming the RGB LEDS
When the controller is on, the default light mode is monochrome gradient. You can change the light mode :

Fixed colours: press R3 & D-Pad up to change to switch colour.
Color gradient: press R3 & D-Pad down I to change to color gradient mode

Turbo function

You can affect a turbo or auto function to the keys: A//X/O/L1/R1/L2/R2.

Turbo: for the first time, press one of the keys listed above, then Turbo. The key has now the turbo function, so everytime you press it, it will repeat quickly.
Automatic: for the second time, press one of the keys listed above, then Turbo. The key has now the auto function, press it once and the action will repeat endlessly.
Clear the turbo function: for the third time, press one of the keys listed above, then Turbo. The key is now reset to original.

IMPORTANT: The turbo function is not available in all games; only some can support it.

eSport M1 & M2 buttons
You can affect to the keys t/l/-/→/Д/O/X/O/L1/R1/L2/R2/L3/R3 to M1 or M2 buttons. By default, M1 is mapped to O, and M2 is mapped to X.

Press and hold the M key, then press Share. The LED indicator will turn orange.
Then press the key that you would like to affect and press M again to save the setting.

Example: to map R1 on M1, press and hold M1, then press Share. The LED indicator turns on orange. The press R1, then M1 again and M1 is now mapped to R1.
To clear the mapping, press the M key, then Share, then the M key again.

Troubleshooting

If you are unable to connect the controller to the console, press the RESET button located in a small hole on the back of the controller with a paper clip. This will reset the controller. If the controller does not work properly, go to www.subsonic.com to update the controller driver.

Precautions for use

Do not use the controller for any purpose other than those described in this document.
To avoid electrical shock, store and use the controller in a dry place, away from moisture and direct sunlight.

Exposure to high temperatures may damage the body or internal electronics of the unit.

Do not disassemble.
Stop using the controller immediately if you experience fatigue, discomfort, or pain. If these effects persist, consult your doctor.
Take regular breaks during play.

Do not allow small children to play with the controller. This product is not intended for children under the age of 3.

Contact and support
The Subsonic team is at your disposal for any further information concerning the WIRELESS LED CONTROLLER or other products in our range of peripherals, contact@subsonic.com

Respect for the environment
To protect the environment, electrical and electronic equipment must not be disposed of with household waste. Please return them to a collection point for recycling.

UE Declaration of conformity to the Radio Equipment Directive
Hereby, SUBSONIC S.A.S. declares that the product WIRELESS LED CONTROLLER

Brand: Subsonic
Models: SA5639-1, SA5639-2, SA5639-3

EAN codes: 3701221703424, 3701221703431, 3701221703448 comply with the essential requirements and other relevant provisions of the Directive

2014/53/UE. For details, please contact SUBSONIC, 314 allée des noisetiers, 69760 LIMONEST, France.

In case of malfunction, update the controller firmware on www.subsonic.com.

CONTACT & SUPPORT

SUBSONIC
314, allée des noisetiers 69760 Limonest – France
contact@subsonic.com
www.subsonic.com

FAQs

Q: How can I contact customer support?
A: You can reach our customer support team through the contact information provided on our website.

Q: Is the product compatible with all devices?
A: The product is compatible with a wide range of devices, but it is recommended to check the compatibility list on our website for specific details.

Documents / Resources

SUBSONIC SA5639 Wireless LED Controller [pdf] Instruction Manual
SA5639 Wireless LED Controller, SA5639, Wireless LED Controller, LED Controller

References

User Manual

SUBSONIC SA5639 Wireless LED Controller

Specifications

Before the first use

Features

Turbo function

Troubleshooting

FAQs

Documents / Resources

References

Leave a comment

Cancel reply