SuAng SA3883 Remote Controller Owner’s Manual

SuAng SA3883 Remote Controller 

Specifications

• Model: ABC123
• Power: 120V, 60Hz
• Capacity: 1.5 liters
• Material: Stainless steel
• Dimensions: 10 x 10 x 12 inches

Product Information
The ABC123 model is a versatile electric kettle designed for easy and quick boiling of water. With a capacity of 1.5 liters, it is perfect for making tea, coffee, instant noodles, and more. The kettle is made of durable stainless steel, ensuring long-lasting performance. Its compact dimensions make it suitable for both home and office use.

Installation Instructions

Unpack the Controller

• Remove the remote controller and all included accessories from the packaging.
• Check that all components are complete and undamaged.

Install Batteries

• Open the battery compartment on the back of the remote.
• Insert the correct type and number of batteries as indicated (+/- polarity).
• Close the battery compartment securely.

Power On

• Turn on the remote controller using the power button.
• Ensure the batteries are functioning; replace them if the remote does not power on.

Pairing / Connecting

• Depending on the controlled device (e.g., fan, light, or other appliance)
• • Put the appliance in pairing mode according to its manual.
  • Press the pairing button on the remote (if available) or follow the pairing procedure in the user manual.
  • Wait for confirmation (light blink or beep) that pairing is successful.

Operating the Controller

• Use the remote buttons to control the appliance according to the functions provided (e.g., power on/off, speed, mode, timer).
• Ensure the remote is within effective range (usually 5–10 meters, line of sight preferred).

Mounting / Storage

• Keep the remote controller in a dry, safe place when not in use.
• Avoid exposing the remote to water, high heat, or strong impacts.
• Optional: Use a wall mount or holder if included for convenient storage.

Troubleshooting
If the remote does not operate the device:

• Check battery orientation and power level.
• Ensure the appliance is powered and in range.
• Re-pair the remote with the appliance if necessary.

Usage Instructions

Initial Setup
Before first use, clean the kettle by rinsing it with warm water and a mild detergent. Wipe it dry with a soft cloth.

Filling the Kettle
Open the lid of the kettle and fill it with water according to your desired quantity. Do not exceed the maximum capacity mark.

Boiling Water
Place the kettle on the base and plug it into a power outlet. Press the power button to start boiling the water. The kettle will automatically turn off once the water reaches boiling point.

Pouring and Serving
Once the water is boiled, carefully pour it from the spout into your cup or container. Use the handle for a secure grip while pouring.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation .

This equipment generates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operate in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
The device has been evaluated to meet the general RF exposure requirements in portable exposure conditions without restriction.

FAQs