SONOFF TX Gen2 Smart Wall Touch Switch (1-Channel) Instruction Manual

1. Langkungview

The SONOFF TX Gen2 Smart Wall Touch Switch (1-Channel) is designed to provide intelligent control over your lighting. This device integrates seamlessly with various smart home platforms, offering convenience through touch, app, and voice control. It features Matter compatibility, allowing for broad ecosystem integration, and includes an independent relay mode to ensure continuous smart light functionality.

Fitur konci:

• Matter Compatibility: Seamless integration with Matter-enabled devices and platforms like Apple Home, Google Home, and Amazon Alexa.
• Independent Relay Mode: Prevents smart lights from going offline due to physical button presses, maintaining app and voice control.
• Nighttime LED Button Indicator: Dimmable LED backlight for easy location in the dark, adjustable to user preference.
• Remote Control & Smart Scenes: Control lights remotely via the eWeLink app over 2.4GHz Wi-Fi, set schedules, and create automated scenes.
• 120-Type Panel Design: Standard design suitable for most North American junction boxes, supporting neutral-wire setups.

Gambar: Hareupeun view of the SONOFF TX Gen2 Smart Wall Touch Switch (1-Channel).

2. Émbaran Kasalametan

Please read all safety information before installing or operating the device to prevent electric shock, fire, or injury. Keep this manual for future reference.

• PERHATOSAN: Always turn off power at the circuit breaker before performing any electrical work. Failure to do so may result in serious injury or death.
• Installation should be performed by a qualified electrician or service personnel.
• Ensure the device is installed in a dry indoor environment.
• Ulah ngaleuwihan ratings beban maksimum dieusian dina spésifikasi produk.
• Verify that your home's electrical wiring includes a neutral wire, as this device requires one for proper operation.

3. Eusi Paket

The package for your SONOFF TX Gen2 Smart Wall Touch Switch (1-Channel) should contain the following items:

• SONOFF TX Gen2 Smart Wall Touch Switch (1-Channel)
• Pamasangan screws
• Manual pangguna (dokumén ieu)

4. Setup jeung Instalasi

Follow these steps to install and set up your SONOFF TX Gen2 Smart Wall Touch Switch.

4.1 Instalasi fisik

1. Pareuman Daya: Before starting, ensure the power is turned off at the circuit breaker to avoid electric shock.
2. Hapus Switch Old: Carefully remove your existing wall switch from the junction box.
3. Separate Front Panel: Use a flat-head screwdriver to gently pry off the front glass panel from the main body of the SONOFF switch. This exposes the wiring terminals.
   

   Gambar: Balik view of the SONOFF TX Gen2 switch, showing the wiring terminals and Matter QR code.

4. Wiring: Connect the wires from your wall to the corresponding terminals on the SONOFF switch.
   • Nyambungkeun Kawat Netral (N) to the 'N' terminal.
   • Nyambungkeun Live Wire (L) to the 'L' terminal.
   • Nyambungkeun Load Wire (L1) to the 'L1' terminal. (For 1-channel switch, only L1 is used).

   Ensure all connections are secure by tightening the terminal screws. Refer to the wiring diagram below for visual guidance.

   

   Image: Wiring diagram for the SONOFF TX Gen2 Smart Wall Touch Switch, showing connections for Neutral, Live, and Load wires.

5. Pasang saklar: Carefully place the wired switch module into the wall junction box and secure it with the provided screws.
6. Pasang Panel hareup: Snap the front glass panel back onto the switch module.
7. Mulangkeun Daya: Turn the power back on at the circuit breaker. The switch's LED indicator should light up.

4.2 Papasangan Aplikasi

The SONOFF TX Gen2 switch supports pairing via the eWeLink app or a Matter-compatible app.

1. Unduh App: Download the eWeLink app from your device's app store (iOS/Android) or use a Matter-compatible app like Apple Home, Google Home, or Amazon Alexa.
2. Scan QR Code: Open the chosen app and select the option to add a new device. Scan the Matter QR code located on the back of the switch module or on the last page of this manual.
   

   Image: Quick Use guide illustrating eWeLink app pairing and Matter QR code scanning for device addition.

3. Lebetkeun Rincian Wi-Fi: Follow the on-screen prompts to connect the switch to your 2.4GHz Wi-Fi network.
4. Mode Papasangan: If prompted, long-press any button on the switch for 5 seconds until the Wi-Fi LED indicator flashes (two short, one long flash) to enter pairing mode.
5. Setup lengkep: Once the device is detected and connected, follow the remaining steps in the app to name your switch and assign it to a room.

5. Parentah Operasi

The SONOFF TX Gen2 Smart Wall Touch Switch offers multiple ways to control your connected lights.

5.1 Manual Toel Control

Simply touch the capacitive button on the switch panel to toggle the connected light on or off. The LED indicator will change state to reflect the light's status.

Image: SONOFF TX Gen2 Smart Wall Touch Switch installed, demonstrating touch control.

5.2 Remote Control via eWeLink App

Once paired, you can control your switch from anywhere using the eWeLink app:

• Kontrol Hurung/Pareuman: Tap the switch icon in the app to turn lights on or off.
• Jadwal: Set timers and schedules for automatic on/off operations.
• Adegan pinter: Create custom scenes to automate actions based on conditions (e.g., "Good Night" scene to turn off all lights).

Image: Illustration of multiple control methods including touch, remote control via smartphone, and voice control.

5.3 Kontrol sora

The switch is compatible with Apple Home, Google Home, and Amazon Alexa. Once integrated, you can use voice commands to control your lights.

• "Hey Siri, turn on the living room light."
• "Ok Google, turn off the kitchen light."
• "Alexa, set the bedroom light to 50%." (Note: Dimming functionality depends on the connected bulb and system).

5.4 Independent Relay Mode

Activate this mode in the eWeLink app settings. When enabled, pressing the physical button on the switch will not cut power to the smart light, ensuring it remains online and controllable via app or voice commands, even if the physical switch is "off".

Image: Comparison showing traditional switch behavior versus Independent Relay Mode, highlighting continuous smart light control.

5.5 Nighttime LED Indicator

The built-in LED indicator helps locate the switch in the dark. You can adjust its brightness through the eWeLink app settings to suit your preference and avoid disturbance.

Image: Close-up of the SONOFF TX Gen2 switch showing the LED button indicator and its dimmable feature.

6. Pangropéa

Proper maintenance ensures the longevity and optimal performance of your smart switch.

• beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun panel kaca. Hindarkeun pembersih atanapi pangleyur anu abrasif anu tiasa ngaruksak permukaan.
• Pembaruan firmware: Regularly check the eWeLink app for available firmware updates. Updates can improve performance, add new features, and enhance security. Follow the in-app instructions to perform updates.
• Kaayaan Lingkungan: Ensure the switch operates within its specified temperature and humidity ranges to prevent damage.

7. Cara ngungkulan

If you encounter issues with your SONOFF TX Gen2 Smart Wall Touch Switch, refer to the following common problems and solutions:

8. Spésifikasi

Detailed technical specifications for the SONOFF TX Gen2 Smart Wall Touch Switch (1-Channel).

Image: Diagram showing the dimensions and key specifications of the SONOFF TX Gen2 switch.

9. Garansi jeung Rojongan

SONOFF provides comprehensive support for its products.

• Garansi: This product comes with a two-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
• Rojongan Palanggan: For technical assistance, troubleshooting, or warranty inquiries, please contact SONOFF customer support at support@itead.cc.
• Sumberdaya Online: Visit the official SONOFF store for additional product information, FAQs, and community support: SONOFF Amazon Store.