VEVOR FJI-POR-50S2

VEVOR 12 Gallon Electric Tank Water Heater

Modél: FJI-POR-50S2

Instruksi Manual

1. Bubuka

This manual provides essential information for the safe installation, operation, and maintenance of your VEVOR 12 Gallon Electric Tank Water Heater. Please read these instructions thoroughly before installation and use, and retain this manual for future reference. This electric water heater is designed for point-of-use applications, providing hot water for 1-2 outlets, suitable for small apartments, studios, or remote water points.

2. Parentah Kasalametan

PERHATOSAN: Failure to follow these safety instructions may result in property damage, serious injury, or death.

  • Installation must be performed by a qualified plumber or electrician in accordance with all local codes and regulations.
  • Ensure the power supply matches the specifications of the water heater (120V~60Hz).
  • Do not operate the water heater if it is not completely filled with water.
  • Install a Temperature and Pressure (T&P) relief valve as specified in this manual and local codes. Do not block or plug the T&P valve outlet.
  • Jauhkeun bahan anu gampang kaduruk tina manaskeun cai.
  • Regularly inspect the unit for leaks, damage, or signs of corrosion.
  • Pegatkeun sambungan kakuatan sateuacan ngalakukeun pangropéa atanapi jasa.
Diagram illustrating multi-layer protection features of the VEVOR water heater, including dry heating protection, overheat protection, high-pressure protection, and IPX4 waterproof rating.

This image illustrates the multi-layer protection features of the VEVOR water heater, including dry heating protection to prevent damage from dry burning, overheat protection to reduce scalding risk, high-pressure protection against pressure-related damage, and an IPX4 waterproof rating for enhanced safety.

3. Produk Langkungview

3.1 Fitur konci

  • Kapasitas 12-Galon: Suitable for 1-2 water outlets, ideal for small living spaces.
  • Pemanasan gancang: Equipped with a 1600W extended immersion heating tube for rapid and uniform water heating.
  • Isolasi anu saé: Features a 20 mm thick foam insulation layer to minimize heat loss and maintain water temperature.
  • Konstruksi awét: High-temperature-resistant and corrosion-resistant enamel interior ensures long-term reliability.
  • Perlindungan Kaamanan: Built-in dry heating, overheating, and overpressure protections, along with an IPX4 waterproof rating.
  • Pangaturan Gampang: Simple rotary knob for temperature control and an LED indicator for heating status.
VEVOR 12 Gallon Electric Tank Water Heater installed under a kitchen counter, showing hot and cold water lines connecting to kitchen and bathroom fixtures.

This image shows the VEVOR 12 Gallon Electric Tank Water Heater installed under a kitchen counter, demonstrating its compact size and capacity to supply hot water to both kitchen and bathroom outlets.

Pahareup-hareup view of the water heater's internal extended immersion heating tube, glowing red, indicating fast and even heating.

Gambar ieu nyadiakeun close-up view of the water heater's internal extended immersion heating tube, illustrating its design for fast and even water temperature distribution.

Cross-section diagram of the water heater's wall, highlighting the metal shell, heat insulation layer, and enamel coating for long-lasting insulation.

This diagram shows a cross-section of the water heater's construction, detailing the metal shell for high pressure resistance, the heat insulation layer for improved heat retention, and the enamel coating for corrosion resistance and long-term use.

3.2 Komponén Kaasup

  • 1 x Storage Water Heater
  • 1 x T & P Relief Valve
  • 1 x Security Valve
  • 1 x selang solokan
  • 1 x pita segel
  • 1 x Selang Clamp

4. Pamasangan

Proper installation is crucial for the safe and efficient operation of your water heater. Refer to local plumbing and electrical codes before beginning installation.

4.1 Pamilihan Loka

  • Choose a location that is protected from freezing temperatures.
  • Ensure the mounting surface is capable of supporting the full weight of the water heater when filled with water (approximately 100 lbs for 12 gallons).
  • Bere rohangan anu cekap pikeun pangropéa sareng layanan.

4.2 Panyambungan Plumbing

  • Connect the cold water inlet (blue) and hot water outlet (red) to your plumbing system using 3/4 inch NPT fittings.
  • Install the provided T&P relief valve into the designated opening on the top or side of the water heater. Route the discharge pipe from the T&P valve to an open drain.
  • Use sealing tape on all threaded connections to prevent leaks.

4.3 Sambungan Listrik

  • Ensure the power supply is disconnected at the circuit breaker before making any electrical connections.
  • Connect the water heater to a dedicated 120V~60Hz electrical circuit with appropriate overcurrent protection.
  • Follow the wiring diagram provided on the unit or in the full manual.

4.4 Ngeusian Pamanas Cai

  • Before connecting power, open a hot water faucet in your home to allow air to escape.
  • Buka klep suplai cai tiis kana manaskeun cai.
  • Once water flows steadily from the hot water faucet, the water heater is full. Close the hot water faucet.
Three-step installation guide for the VEVOR water heater, showing plugging in the unit, attaching the one-way valve to the water inlet, and applying sealing tape to threads.

This image illustrates a 3-step installation process: 1. Install the three-prong plug on the right side above the heater. 2. Attach the one-way valve to the water inlet. 3. To reduce leaks during pipe connection, add a rubber sealing gasket to the end of the threads.

Diagram showing two configurations: a single faucet unit with the water heater supplying one faucet, and a booster unit where the water heater acts as a booster for an existing system.

This diagram demonstrates two application scenarios: a 'Single Faucet Unit' where the heater supplies hot water directly to one faucet, and a 'Booster Unit' where it functions as a booster for an existing water heater system, ensuring continuous hot water during peak usage.

5. Parentah Operasi

Once installed and filled with water, you can begin operating your VEVOR water heater.

5.1 Kakuatan Hurung

Hurungkeun catu daya ka pemanas cai dina pemutus sirkuit.

5.2 adjustment hawa

Use the rotary knob on the front panel to set your desired water temperature. The temperature adjustment range is typically 95°F-167°F (35°C-75°C).

5.3 Indikator LED

The LED indicator light will illuminate when the heating element is active and turn off once the set temperature is reached.

Image showing the temperature control knob and LED indicator on the VEVOR water heater's control panel.

This image highlights the convenient operating system, featuring a temperature control knob for setting water temperature between 95°F-167°F and an LED indicator to display the heating status.

6. Pangropéa

Pangropéa rutin mastikeun kinerja anu optimal sareng manjangkeun umur pemanas cai anjeun. Salawasna pegatkeun listrik sateuacan pangropéa.

6.1 Draining tank

Periodically drain the tank to remove sediment buildup. This should be done at least once a year, or more frequently in areas with hard water.

  1. Pareuman catu daya ka manaskeun cai.
  2. Tutup klep suplai cai tiis kana manaskeun cai.
  3. Connect a hose to the drain valve at the bottom of the tank and route it to a suitable drain.
  4. Buka klep solokan cai teras buka keran cai panas di bumi anjeun pikeun ngamungkinkeun hawa asup ka tangki, ngagampangkeun solokan cai.
  5. Once drained, close the drain valve and hot water faucet, then refill the tank as described in the installation section before restoring power.

6.2 T&P Valve Inspection

Test the T&P relief valve annually by lifting the lever. Water should discharge from the drain pipe. If no water discharges, or if the valve does not reseat properly, replace it immediately.

6.3 Anode Rod Inspection

The anode rod protects the tank from corrosion. Inspect and replace the anode rod every 3-5 years, or more often if water conditions are aggressive.

7. Cara ngungkulan

Sateuacan nelepon pikeun layanan, ulangview masalah umum sareng solusi ieu:

MasalahMungkin Cukang lantarananaSolusi
Taya cai panasNo power; thermostat set too low; heating element failureCheck circuit breaker; adjust thermostat; contact qualified technician
cai panas teu cukupThermostat set too low; excessive hot water usage; sediment buildupIncrease temperature setting; reduce usage; drain tank
Cai panas teuingTermostat diatur teuingSetélan suhu handap
Cai bocorLoose connections; T&P valve discharge; tank leakTighten connections; check T&P valve; contact qualified technician for tank leaks
Sora anu teu biasaTumpukan sedimen dina tankiDrain and flush the tank

8. Spésifikasi

SpésifikasiNilai
merekVEVOR
Nomer modélFJI-POR-50S2
Kapasitas12 galon
Wattage1600 watt
Voltage / Frékuénsi120V~60Hz
Suhu maksimum167 Derajat Fahrenheit (75°C)
Minimum Operating Water Pressure0.02 MPa
Peunteun waterproofIPX4
Cold Water Inlet Size3/4 dina NPT
Hot Water Outlet Size3/4 dina NPT
Bahan UtamaBaja
Beurat bersih40.1 pon / 18.2 kg
Item Dimensions (Dia x H)16.1 in x 23.6 in / Φ410 x 600 mm
Diagram showing detailed dimensions and specifications of the VEVOR 12 Gallon Electric Tank Water Heater, including height, width, and component measurements.

This image provides a detailed technical drawing of the water heater, outlining its dimensions and key specifications such as power, capacity, voltage, and inlet/outlet sizes.

9. Garansi jeung Rojongan

For warranty information or technical support, please contact VEVOR customer service. Keep your purchase receipt and model number (FJI-POR-50S2) readily available when contacting support.

Anjeun biasana tiasa mendakan inpormasi kontak dina petugas VEVOR. websitus atawa ngaliwatan pangecér Anjeun.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.