GTRACING Gaming Chair GT901-NEW Instruction Manual

1. Émbaran Kasalametan penting

Mangga baca tur ngartos sagala parentah saméméh assembly sarta pamakéan. Simpen manual ieu pikeun rujukan ka hareup.

• Batesan Beurat: Do not exceed the maximum recommended weight of 300 lbs (approximately 136 kg). Exceeding this limit may cause damage to the chair and potential injury.
• Majelis: Ensure all screws and bolts are securely tightened before using the chair. Periodically check and re-tighten all fasteners.
• Stabilitas: Avoid standing on the chair or using it as a step stool. Do not lean excessively to one side when reclining to prevent tipping.
• Barudak: Keep children away from moving parts during assembly. This chair is designed for adult use.
• panempatan: Anggo korsi dina permukaan anu datar sareng stabil. Ulah neundeunna dina taneuh anu henteu rata atanapi caket sumber panas.

2. Eusi Paket

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact GTRACING customer support.

• Tukang tonggong
• Seat Base with Armrests and Retractable Footrest
• Base Star
• Roda (5 buah)
• Gas Lift Cylinder with Cover
• Mékanisme Plate
• Bantal Rojongan Lumbar
• Bantal Headrest
• Pakakas Keras (sekrup, ring, konci Allen)
• Instruksi Manual

3. Setup jeung Parentah Majelis

Follow these steps carefully to assemble your GTRACING Gaming Chair. It is recommended to have a second person assist with certain steps.

Step 1: Attach Casters to Star Base

Selapkeun unggal tina lima roda kana liang di tungtung dasar béntang dugi ka ngaklik pageuh kana tempatna.

Step 2: Install Gas Lift Cylinder

Place the gas lift cylinder into the center hole of the star base. Cover the cylinder with the provided plastic cover.

Step 3: Attach Mechanism Plate to Seat Base

Align the mechanism plate with the screw holes on the underside of the seat base. Ensure the front of the mechanism plate faces the front of the seat. Secure with the appropriate screws and tighten firmly.

Step 4: Connect Backrest to Seat Base

Attach the backrest to the seat base using the provided screws. Ensure proper alignment and tighten all screws securely. This step may require assistance.

Step 5: Mount Assembled Seat onto Gas Lift

Carefully place the assembled seat (with backrest and mechanism plate attached) onto the gas lift cylinder. Apply downward pressure to ensure it is seated properly.

Step 6: Attach Lumbar and Headrest Pillows

Secure the lumbar support pillow and headrest pillow to the backrest using their integrated straps. Adjust their positions for optimal comfort.

Figure 3.1: Fully assembled GTRACING Gaming Chair in Dark Grey.

4. Parentah Operasi

4.1 adjustment jangkungna

To adjust the chair's height, pull the lever located under the right side of the seat upwards. While holding the lever, either stand up to raise the chair or sit down to lower it. Release the lever to lock the height.

4.2 Sandaran Ngagoler

The backrest can recline from 90° to 160°. To recline, pull the lever on the right side of the chair (near the armrest) upwards. Lean back to your desired angle and release the lever to lock the position. To return to an upright position, pull the lever and lean forward.

Figure 4.1: Chair demonstrating the reclining function with the footrest extended.

4.3 Sandaran Suku Anu Tiasa Ditarik

To use the footrest, pull it out from underneath the seat. Extend it fully for support. To retract, push it back underneath the seat until it is fully stored.

4.4 Armrest adjustment

The armrests are 2D adjustable. To adjust the height, press the button located on the side of each armrest and move the armrest up or down. Release the button to lock it in place. The armrests can also pivot horizontally.

Figure 4.2: Illustration of the adjustable 2D armrests.

4.5 Lumbar and Headrest Pillow Adjustment

The lumbar and headrest pillows are adjustable. Slide them up or down along the backrest straps to find the most comfortable position for your neck and lower back support.

5. Pangropéa

Regular maintenance will prolong the life and appearance of your GTRACING Gaming Chair.

• beberesih: Wipe the PVC leather with a soft, damp lawon. Pikeun noda anu bandel, anggo larutan sabun anu hampang teras usap ku kaén anu bersih,amp lawon. Hindarkeun bahan kimia anu kasar atanapi pembersih abrasive.
• Pamariksaan: Périodik pariksa sagala screws na bolts pikeun mastikeun aranjeunna kedap. Kencangkeun deui upami diperyogikeun.
• Pindah: Nalika mindahkeun korsi, angkat heula ulah disered pikeun nyegah karusakan kana roda atanapi dasarna.
• Hindarkeun sinar panonpoé langsung: Paparan sinar panonpoé langsung anu berkepanjangan tiasa nyababkeun bahan luntur atanapi retak.

Figure 5.1: Close-up of the chair's durable and easy-to-clean PVC leather material.

6. Cara ngungkulan

Tingali tabel di handap pikeun masalah umum sareng solusina.

7. Spésifikasi

Figure 7.1: Detailed dimensions of the GTRACING Gaming Chair.

8. Garansi sarta Rojongan Palanggan

GTRACING is committed to providing excellent after-sales service. If you encounter any issues with your gaming chair or have questions regarding its assembly, operation, or maintenance, please do not hesitate to contact our support team.

Our support team is ready to assist and will respond within 24 hours to ensure your satisfaction. Please refer to your purchase documentation for specific warranty details and contact information.

For further assistance, visit the official GTRACING websitus atanapi ngahubungan pangecér dimana produk ieu dibeuli.