1. Bubuka
This manual provides instructions for the safe and effective use of your ARRIS Heated Beanie Hat. This hat is designed to provide warmth to your head and ears during cold weather activities. Please read this manual thoroughly before using the product.
Image 1.1: Key features of the ARRIS Heated Beanie Hat, highlighting its design and material properties.
The ARRIS Heated Beanie Hat features a lightweight knit exterior with a plush fleece lining. It incorporates heating elements to provide warmth across the head and ears. The hat is powered by a rechargeable battery and offers three adjustable heat settings.
Image 1.2: Detail of the soft fleece lining designed to retain warmth.
2. Émbaran Kasalametan
Punten perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan produk:
- Do not use the hat if it is wet or damp.
- Keep the battery pack away from water and extreme temperatures.
- Do not puncture, disassemble, or modify the battery pack or heating elements.
- If you experience discomfort or excessive heat, immediately turn off the hat and remove it.
- Supervise children when they are using the heated hat.
- The hat includes built-in overheat protection to ensure safe operation.
Image 2.1: Representation of the overheating protection system integrated into the hat's electronics.
3. Eusi Paket
Pastikeun yén sadaya item aya dina bungkusan:
- 1 x ARRIS Heated Beanie Hat
- 1 x 7.4V 2500mAh Rechargeable Battery Pack
- 1 x Charger for Battery Pack
4. Setélan
4.1 Ngecas Batré
- Sambungkeun carjer ka colokan listrik.
- Sambungkeun pak batré ka carjer.
- Allow the battery to fully charge before first use. The indicator light on the charger will change when charging is complete.
Image 4.1: The rechargeable battery pack and its charging setup.
4.2 Nyelapkeun Batré
- Locate the battery pocket inside the beanie hat.
- Insert the fully charged battery pack into the pocket.
- Connect the hat's power cable to the battery pack. Ensure a secure connection.
5. Parentah Operasi
5.1 Powering on / Pareum
Press and hold the power button on the hat for 3-5 seconds to turn it on. The hat will typically start on the highest heat setting. To turn off, press and hold the power button again for 3-5 seconds until the indicator light turns off.
5.2 Nyaluyukeun Setélan Panas
Once the hat is powered on, short press the power button to cycle through the heat settings:
- Luhur (Lampu Beureum): Approximately 149°F (65°C), providing 3-4 hours of warmth.
- Medium (White Light): Approximately 131°F (55°C), providing 4-5 hours of warmth.
- Low (Blue Light): Approximately 113°F (45°C), providing 6-7 hours of warmth.
For optimal performance, it is recommended to use the highest heat level for the first 5-10 minutes to quickly warm up, then switch to a medium or low setting for sustained warmth and battery life.
Image 5.1: Heat level settings, corresponding temperatures, and approximate battery durations.
Gambar 5.2: Leuwihview of the hat's heating system and its components.
6. Pangropéa
6.1 Parentah beberesih
The ARRIS Heated Beanie Hat is machine washable. Before washing:
- Ensure the hat is turned off and disconnected from the battery.
- Remove the battery pack from its pocket.
- Cuci mesin dina siklus hipu sareng cai tiis.
- Ulah ngabodaskeun atawa beusi.
- Air dry completely before reinserting the battery and using.
6.2 Kamanusaan sarta Studi Batré
- Simpen batréna di tempat anu tiis sareng garing upami henteu dianggo.
- Charge the battery at least once every three months to maintain its lifespan if stored for extended periods.
- Ulah ngalaan batré ka sinar panonpoé langsung atawa sumber panas.
7. Cara ngungkulan
If you encounter issues with your ARRIS Heated Beanie Hat, refer to the following:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Hat does not heat up. | Batré teu dieusian atawa teu nyambung. | Ensure the battery is fully charged and securely connected to the hat's power cable. |
| Batré teu ngecas. | Charger or battery issue. | Check if the charger is properly plugged into a working outlet. Ensure the battery is correctly connected to the charger. If the issue persists, contact customer support. |
| hirup batré pondok. | High heat setting used continuously; battery degradation. | Switch to a lower heat setting after initial warm-up. Ensure the battery is fully charged before each use. Battery capacity may decrease over time with repeated use. |
| Hat feels too tight. | Head circumference is larger than recommended. | The hat is designed to fit head circumferences between 19.7-23.6 inches. If your head is larger, the fit may be snug. |
8. Spésifikasi
- model: Heated Beanie Hat
- Bahan: 100% Poliéster
- Batré: 7.4V 2500mAh Rechargeable Lithium-ion
- Setélan panas: 3 Tingkat (Haneuh, Sedeng, Luhur)
- Perkiraan Kahirupan Batré: 3-7 hours depending on heat setting
- Parentah perawatan: Machine Wash (remove battery first)
- Head Circumference: Fits 19.7-23.6 inches (50-60 cm)
Image 8.1: Sizing information for the ARRIS Heated Beanie Hat.
9. Garansi jeung Rojongan
ARRIS products are designed for reliability and performance. If you have any questions, concerns, or require assistance with your Heated Beanie Hat, please contact ARRIS customer support. Refer to your purchase documentation for specific warranty details or visit the official ARRIS websitus pikeun inpo kontak.
