EXFO MAX-710B OTDR Module User Manual

1. Bubuka

The EXFO MAX-710B is a tablet-inspired Optical Time Domain Reflectometer (OTDR) designed for efficient fiber optic network testing. It features a 7-inch outdoor-enhanced touchscreen and an intuitive graphical user interface (GUI). This device is optimized for point-to-point testing and troubleshooting of FTTx architectures, including short fiber segments in central office (CO) environments or FTTA/DAS network installations.

The MAX-710B offers a 12-hour battery life and supports plug-and-play hardware options such as a Visual Fault Locator (VFL), power meter, and USB tools. Its compact and rugged design makes it suitable for various field environments.

2. Produk Langkungview

The following diagram illustrates the key components and ports of the EXFO MAX-710B OTDR unit.

Gambar 2.1: Hareupeun view of the EXFO MAX-710B OTDR with labeled ports and indicators.

1. Singlemode OTDR port: Connects to the fiber under test.
2. Testing LED indicator: Illuminates during OTDR testing.
3. Stylus: For precise touchscreen interaction.
4. Méter kakuatan: Integrated optical power measurement port.
5. Visual fault locator: Integrated red laser for visual fault identification.
6. 10/100 Mbit/s Ethernet port: Pikeun konektipitas jaringan.
7. Two USB 2.0 ports: For connecting USB devices (e.g., storage, external keyboard).
8. Adaptor AC: Input kakuatan pikeun ngecas sareng operasi.
9. Home/switch application and screen capture (hold): Button for navigation and utility functions.
10. Power on/off/standby: Main power control button.
11. Battery LED status: Nunjukkeun tingkat muatan batré sareng status ngecas.

3. Setélan

3.1 Ngabongkar bungkusan sareng Inspeksi Awal

Carefully unpack the EXFO MAX-710B unit and all accessories. Verify that all components listed in the packing slip are present and undamaged. Retain the packaging for future transport or storage.

Figure 3.1: EXFO MAX-710B OTDR unit with typical accessories including charger, carrying bag, and documentation.

3.2 Ngecas Batré

Before first use, fully charge the internal battery. Connect the provided AC adapter to the AC adapter port (8) on the unit and plug it into a power outlet. The Battery LED status indicator (11) will show the charging progress. A full charge provides approximately 12 hours of operation.

3.3 Powering on / Pareum

• Pikeun Ngahurungkeun: Press and hold the Power On/Off/Standby button (10) until the screen illuminates.
• Pikeun mareuman: Press and hold the Power On/Off/Standby button (10) until the shutdown options appear on the screen, then select 'Power Off'.
• To Enter Standby: Briefly press the Power On/Off/Standby button (10). Briefly press again to wake the device.

Figure 3.2: The EXFO MAX-710B display showing the initial boot screen.

4. Parentah Operasi

4.1 Navigasi Antarbeungeut Pangguna

The MAX-710B features an intuitive, icon-based graphical user interface (GUI) optimized for its 7-inch touchscreen. Use your finger or the provided stylus (3) to navigate menus, select options, and input data. The 'Home' button (9) allows quick access to the main application screen.

4.2 Performing an OTDR Test

1. Sambungkeun Serat: Clean the fiber optic connector and connect it to the Singlemode OTDR port (1).
2. Select OTDR Application: From the main menu, tap the OTDR application icon.
3. Configure Test Parameters: The OTDR 2.0 environment offers automatic and real-time modes. For most standard tests, the auto mode will configure optimal parameters. You can manually adjust settings such as wavelength (1310nm or 1550nm), pulse width, and range if required.
4. Mimitian Test: Tap the 'Start' button on the screen to initiate the OTDR trace. The Testing LED indicator (2) will illuminate.
5. Analisis Hasil: Once the test is complete, the OTDR trace will be displayed, showing events, losses, and reflections. The device includes automatic macrobend finders to assist in analysis.
6. Save Results: Save the test results for documentation and reporting.

Figure 4.1: OTDR trace display showing fiber events and measurement data.

4.3 Ngagunakeun Parabot Terpadu

• Visual Sesar Locator (VFL): Activate the VFL from the menu to inject a red laser into the fiber for visual identification of breaks or macrobends over short distances.
• Méter kakuatan: Use the integrated power meter (4) to measure optical power levels.
• Ethernet Tester: The device includes an Automated Ethernet Tester for 10/100/1000MB Ethernet network installation and optimization.

5. Pangropéa

5.1 Ngabersihan Unit

• layar: Make kaen nu lemes, teu aya lint rada dampened with water or a mild screen cleaner. Do not use abrasive cleaners or solvents.
• Casing: Ngusap luar ku hipu, damp lawon.
• Optical Ports: Always keep optical ports covered when not in use. Use specialized fiber optic cleaning tools (e.g., lint-free wipes, cleaning sticks, compressed air) to clean the OTDR port and VFL/power meter ports. Improper cleaning can damage the optical connectors.

5.2 Perawatan Batré

• Pikeun umur batre optimal, ulah pinuh discharging batré remen.
• Simpen unit ieu di tempat anu tiis sareng garing upami henteu dianggo salami waktos anu lami.
• Use only the original EXFO-approved AC adapter for charging.

5.3 Apdet parangkat lunak

périodik pariksa produsén urang website for software updates to ensure optimal performance and access to new features. Follow the provided instructions for installing updates via USB or Ethernet connection.

6. Cara ngungkulan

6.1 Isu umum

• Unit teu hurung: Ensure the battery is charged. Connect the AC adapter and attempt to power on. If the issue persists, contact support.
• Layar rampa teu ngaréspon: Perform a soft reset by holding the power button for an extended period (e.g., 10-15 seconds) until the unit restarts. Ensure the screen is clean and dry.
• No OTDR trace or inaccurate readings:
  • Verify the fiber connection is clean and secure at the OTDR port.
  • Ensure the correct wavelength (1310nm/1550nm) is selected for the fiber type.
  • Check the fiber under test for severe damage or breaks using the VFL.
  • Ensure the test parameters (pulse width, range) are appropriate for the fiber length.
• Batré teu ngecas: Verify the AC adapter is properly connected and the power outlet is functional. Check the AC adapter for damage.

6.2 Ngahubungan Rojongan

If troubleshooting steps do not resolve the issue, please contact EXFO technical support or your authorized distributor for further assistance. Provide your product model number (MAX-710B-SM1) and a detailed description of the problem.

7. Spésifikasi

8. Garansi jeung Rojongan

This product is covered by a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the documentation included with your purchase or visit the official EXFO websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.

For technical support, service, or replacement parts, please contact EXFO customer service. Contact information can typically be found on the EXFO websitus atanapi dina bungkusan produk.