Buku Panduan Pangguna Papan Pengembangan LoRa LILYGO T-Deck ESP32-S3

1. Bubuka

This manual provides essential information for the proper setup, operation, and maintenance of your LILYGO T-Deck ESP32-S3 LoRa Development Board. The T-Deck is a versatile development platform featuring an ESP32-S3 microcontroller, integrated LoRa, Bluetooth Low Energy (BLE), and Wi-Fi connectivity, along with a 2.8-inch LCD display and a QWERTY keyboard, designed for various long-range communication and IoT projects.

Mangga baca manual ieu kalawan saksama sateuacan nganggo alat pikeun mastikeun kinerja sareng kaamanan anu optimal.

2. Émbaran Kasalametan

Handle the development board with care to avoid damage to electronic components.
Hindarkeun alat ka suhu ekstrim, kalembaban, atanapi sinar panonpoé langsung.
Do not attempt to disassemble or modify the device beyond what is described in this manual or official LILYGO documentation.
Mastikeun vol catu daya ditangtoskeuntage (typically 5V via USB-C) to prevent damage.
Jauhkeun tina jangkauan barudak.

3. Eusi Paket

Pastikeun yén sadaya item anu didaptarkeun di handap aya dina pakét anjeun:

1 x LILYGO T-Deck ESP32-S3 Development Board
1 x Lulugu 6-pin
1 x Kabel Daya
1 x 433MHz FPC Antenna

LILYGO T-Deck package contents including the board, a 6-pin header, a power cable, and a 433MHz FPC antenna.

Image: Contents of the LILYGO T-Deck package.

4. Produk Langkungview

The LILYGO T-Deck combines a compact design with powerful features for various applications. Familiarize yourself with the key components:

Hareupeun View: Display and Input

Hareupeun view of the LILYGO T-Deck showing the 2.8-inch LCD screen, QWERTY keyboard, and central trackball.

Gambar: Hareupeun view of the LILYGO T-Deck.

Layar LCD 2.8 inci: Provides visual feedback and user interface.
Kibor QWERTY: For text input and command entry.
Trackball: Navigational input for the user interface.

Tukangeun View: Main Components and Connectors

Tukangeun view of the LILYGO T-Deck circuit board, highlighting the ESP32-S3 module, LoRa module, speaker, USB port, and battery connector.

Gambar: Tukangeun view of the LILYGO T-Deck circuit board.

ESP32-S3 Module: The main microcontroller unit (MCU) for processing.
Modul LoRa: Enables long-range, low-power wireless communication.
Speaker: Pikeun kaluaran audio.
Palabuhan USB-C: For power supply and data communication (e.g., flashing firmware).
Panyambung batré: For connecting an external LiPo battery (battery not included).
Slot Kartu MicroSD: Pikeun panyimpenan anu tiasa dilegaan.
Panyambung anteneu: For connecting the LoRa antenna.
Power Switch (SW1): Pikeun ngahurungkeun/off alat.

5. Setélan

5.1. Connecting the LoRa Antenna

Carefully connect the provided FPC antenna to the LoRa antenna connector on the rear of the board. Ensure a secure connection to optimize LoRa signal performance.

5.2. Powering Alat

The T-Deck can be powered via its USB-C port or an external LiPo battery (not included).

Daya USB-C: Connect a standard USB-C cable to the USB-C port and a 5V power source (e.g., computer, USB wall adapter).
Daya Batré: Connect a compatible LiPo battery to the battery connector. Ensure correct polarity.

After connecting power, slide the power switch (SW1) to the "ON" position to power on the device.

5.3. Initial Firmware and Configuration

Your LILYGO T-Deck comes pre-loaded with LILYGO firmware. For advanced configurations, custom development, or flashing alternative firmware (e.g., Meshtastic), refer to the official LILYGO Wiki and GitHub repositories:

Wiki: wiki.lilygo.cc/
GitHub: github.com/Xinyuan-LilyGO/T-Deck

When flashing new firmware, ensure the power switch is in the "OFF" position. Then, hold down the trackball while powering on the device to enter flashing mode. The screen may remain black during this process.

6. Parentah Operasi

6.1. Basic Interaction

tampilan: The 2.8-inch LCD shows the user interface, status information, and messages.
kibor: Use the QWERTY keyboard for typing messages, commands, or navigating menus.
Trackball: Navigate through menus and select options on the display.

6.2. Konéktipitas Wireless

The T-Deck supports multiple wireless communication protocols:

LoRa/LoRaWAN: For long-range, low-power data transmission. Configuration details depend on the loaded firmware (e.g., Meshtastic for mesh networking).
Wi-Fi 2.4 GHz: For local network connectivity, internet access (if configured), and data transfer.
Bluetooth 5 (LE): For short-range communication with other Bluetooth-enabled devices, such as smartphones for configuration or data exchange.

Specific operating procedures for each connectivity type will depend on the firmware installed. Refer to the respective firmware documentation for detailed instructions.

7. Pangropéa

beberesih: Anggo kaén anu lemes sareng garing pikeun ngabersihan alat. Hindarkeun pembersih cair atanapi bahan abrasive.
Panyimpenan: Store the T-Deck in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, ensure any connected LiPo battery is charged to approximately 50% to prolong its lifespan.
Pembaruan firmware: Regularly check the official LILYGO GitHub repository for firmware updates to ensure optimal performance, new features, and security patches. Follow the provided instructions for updating firmware.

LILYGO T-Deck stored securely in a protective plastic case with foam inserts.

Image: LILYGO T-Deck in a protective storage case.

8. Cara ngungkulan

Masalah	Mungkin Cukang lantaranana	Solusi
Alat teu hurung.	No power, power switch off, faulty cable/battery.	Ensure USB-C cable is connected to a working power source or battery is charged and connected correctly. Check power switch (SW1) is in "ON" position.
Layar tetep hideung saatos hurung.	Device in flashing mode, firmware issue.	If intentionally flashing, this is normal. Otherwise, try restarting. If issue persists, consider re-flashing firmware (see Section 5.3).
LoRa communication issues.	Antenna not connected, incorrect frequency, firmware misconfiguration.	Verify antenna is securely connected. Check firmware settings for correct LoRa frequency (e.g., 915MHz or 433MHz) and parameters.
Wi-Fi/Bluetooth connectivity problems.	Incorrect network credentials, device out of range, firmware issue.	Ensure correct Wi-Fi SSID and password. Move device closer to access point. Check firmware settings for Wi-Fi/Bluetooth.

For further assistance, consult the LILYGO Wiki and GitHub resources, or engage with the community forums related to ESP32-S3 and LoRa development.

9. Spésifikasi

Fitur	Rincian
Mikrokontroler (MCU)	Mikroprosesor LX7 dual-core ESP32-S3FN16R8
Konéktipitas Wireless	2.4 GHz Wi-Fi, Bluetooth 5 (LE), LoRa (e.g., 915MHz, 433MHz depending on module/antenna)
tampilan	2.8 inci LCD
Input	QWERTY Keyboard, Trackball
Panyimpenan	Slot Kartu MicroSD
Input kakuatan	USB-C (5V), LiPo Battery Connector
Ukuran (Kira-kira.)	Panjang: 100mm, Lebar: 67mm, Jangkungna: 14mm
Beurat	3.2 ons (kira-kira 90.7 gram)
UPC	717382831510

LILYGO T-Deck with dimensions labeled: Length 100mm, Width 67mm, Height 14mm.

Image: LILYGO T-Deck dimensions.

10. Garansi jeung Rojongan

LILYGO is committed to providing quality products and support. While specific warranty details are not provided in this document, for any questions or suggestions regarding your LILYGO T-Deck, please contact LILYGO customer service. They will endeavor to answer your questions as soon as possible.

For technical documentation, community support, and the latest updates, please visit the official LILYGO resources:

Wiki LILYGO: wiki.lilygo.cc/
LILYGO GitHub: github.com/Xinyuan-LilyGO/T-Deck
LILYGO Store on Amazon: Nganjang ka Toko LILYGO

	LILYGO T-BEAM-S3 Guide pamaké: Setup jeung Pangwangunan Buku pituduh ieu nyadiakeun parentah komprehensif pikeun nyetel papan ngembangkeun LILYGO T-BEAM-S3. Diajar kumaha ngonpigurasikeun lingkungan parangkat lunak nganggo Arduino IDE, sambungkeun papan, sareng paké kamampuan Wi-Fi, BLE, GPS, sareng LoRa pikeun proyék-proyék IoT.
	LILYGO T-Deck ESP32-S3 Guide pamaké pikeun Arduino Development Pituduh pamaké komprehensif pikeun papan ngembangkeun LILYGO T-Deck, detailing setelan Arduino IDE, konfigurasi ESP32-S3, Wi-Fi sarta LoRa fungsionalitas, sarta rujukan paréntah SSC pikeun aplikasi IoT.
	LILYGO T3-S3 Guide pamaké Buku pituduh pikeun papan pangembangan LILYGO T3-S3, ngawengku setelan Arduino IDE, konfigurasi, nguji, jeung rujukan paréntah Wi-Fi pikeun modul ESP32-S3.
	LILYGO T-Tampilan-S3 Guide pamaké Buku pituduh pikeun papan pangembangan LILYGO T-Display-S3, ngawengku setelan, pamakean Arduino IDE, sareng paréntah Wi-Fi dasar.
	LILYGO T-tampilan Guide pamaké Buku pituduh pikeun papan pangembangan LILYGO T-Display, ngawengku setelan, integrasi Arduino, sareng paréntah dasar pikeun ngembangkeun modul ESP32.
	LILYGO T-Dongle-S3 Guide pamaké: Ngamimitian ku Development ESP32-S3 Pituduh pangguna komprehensif pikeun papan pangembangan LILYGO T-Dongle-S3. Diajar kumaha nyetél lingkungan pamekaran Arduino anjeun, program modul ESP32-S3, sareng ngajalajah fitur Wi-Fi sareng Bluetooth.

LILYGO T-Deck ESP32-S3