EasySMX S10 Wireless Controller Instruction Manual

Bubuka

This manual provides detailed instructions for the EasySMX S10 Wireless Controller. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience across various platforms including Nintendo Switch, PC, iOS, and Android devices.

Fitur produk

• One-Tap Wake Up: Seamlessly wake up your Nintendo Switch console with a single button press.
• TMR Anti-Drift Joysticks: Combines Hall Effect durability with carbon-film precision for zero-drift and ultra-smooth analog input.
• Full Mechanical Buttons: Micro-switch buttons with 0.3mm actuation and a lifespan of over 5 million clicks, providing tactile feedback.
• HD Vibration: Equipped with ALPS Linear HD Rumble motors for multi-layered haptic feedback.
• Batré awét: Built-in 1200mAh battery offers up to 17 hours of playtime with lights and vibration, or up to 26 hours without.
• Interchangeable D-pad & Custom Faceplate: Allows swapping between disc and cross-style D-pads and magnetic removable faceplates for personalization.
• Fitur tambahan: Customizable RGB lighting, 2 programmable back buttons, 6-axis gyroscope for motion sensing, and NFC function.

Disetél

Eusi pakét

• EasySMX S10 Wireless Controller
• Kabel Ngecas USB-C
• Interchangeable D-pads (if included)
• Customizable Faceplates (if included)
• Manual pamaké

Layout Controller

The EasySMX S10 controller features standard gaming buttons, including A/B/X/Y buttons, directional pad, left and right analog sticks, shoulder buttons (L/R), and triggers (ZL/ZR). Additionally, it includes a HOME button, a Capture button, and two programmable back buttons (GR/GL).

Ngecas Controller

Connect the provided USB-C cable to the controller's charging port and the other end to a USB power source (e.g., a computer, wall adapter). The LED indicators on the controller will show charging status and turn off when fully charged. A full charge typically takes approximately 3 hours.

Parentah Operasi

Connecting to Nintendo Switch / Switch 2

1. Set the mode toggle switch on the back of the controller to the "S" mode.
2. Press and hold the HOME button on the controller for 3 seconds until the LED indicators flash rapidly.
3. On your Nintendo Switch console, navigate to Controllers > Robah Pakem / Orde.
4. When the LED on the controller becomes solid and you feel a short vibration, pairing is complete.
5. (First-time connection only) Within 20 seconds after pairing, remove and reattach the Joy-Con controllers from the console. This action activates the wireless wake-up function for future use.
6. For future reconnections, simply short-press the HOME button to automatically reconnect and wake the console.

Nyambungkeun ka PC

1. Set the mode toggle switch on the back of the controller to the "X" mode.
2. Connect the controller to your PC via the provided Type-C cable. The controller will be recognized as an Xbox Wireless Controller.
3. For wireless connection, ensure Bluetooth is enabled on your PC. Milarian pikeun "Xbox Wireless Controller" in your Bluetooth settings and select it to pair.

Connecting to Mobile (iOS & Android)

1. Set the mode toggle switch on the back of the controller to the "X" mode.
2. Aktipkeun Bluetooth dina telepon sélulér Anjeun.
3. Milarian pikeun "Xbox Wireless Controller" in your phone's Bluetooth settings and select it to pair.
4. When the LED on the controller becomes steady with a short vibration, pairing is confirmed.

Ngaropea Lampu RGB

The controller features customizable RGB lighting. Refer to the quick start guide included in the packaging for specific button combinations to change lighting modes, colors, or to turn the lighting off.

Programming Back Buttons

The two back buttons (GR and GL) can be programmed to perform specific actions or combos. Consult the quick start guide for detailed instructions on how to map functions to these buttons.

Swapping D-Pads and Faceplates

The S10 controller allows for easy customization. The D-pad can be swapped between a classic cross-style and a smooth circular control. The magnetic faceplates can also be removed and replaced to personalize the controller's appearance.

Image: The EasySMX S10 controller highlighting the swappable D-pads, allowing users to choose between a classic cross-style or a smooth circular control.

Pangropéa

• Tetep controller bersih ku ngusap eta ku lawon lemes, garing.
• Ulah ngalaan controller ka suhu ekstrim, kalembaban, atawa sinar panonpoé langsung.
• Do not attempt to disassemble the controller, as this may void the warranty.
• Nyimpen controller dina tempat anu aman lamun teu dipaké pikeun nyegah karuksakan.

Pamérésan masalah

Controller Henteu Nyambungkeun / Nyapasangkeun

• Pastikeun yén controller dieusi cukup.
• Verify the mode toggle switch on the back is set to the correct platform (S for Switch, X for PC/Mobile).
• Restart the console/device and the controller, then attempt the pairing process again.
• If connecting to Switch for the first time and wake-up function doesn't activate, repeat the pairing process and ensure Joy-Cons are removed and reattached within 20 seconds after initial pairing.

NFC Function Not Working

• Ensure the NFC function is enabled on your console/device settings.
• Place the Amiibo or NFC tag directly over the NFC sensor area on the controller.

Image: The EasySMX S10 controller demonstrating its NFC function, allowing for scanning and unlocking in-game surprises.

spésifikasi

Garansi sareng Rojongan

EasySMX products typically come with a manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official EasySMX websitus pikeun inpo jaminan lengkep jeung istilah.

For technical support, troubleshooting assistance, or any product-related inquiries, please contact EasySMX customer service through their official websitus atanapi inpormasi kontak anu disayogikeun dina dokuméntasi produk anjeun. Anjeun oge bisa nganjang ka EasySMX Store on Amazon pikeun inpormasi lengkep sareng sumber pangrojong.