Bubuka
This manual provides detailed instructions for setting up, operating, and maintaining your AceGamer Wireless Controller. This controller is designed for use with Nintendo Switch, Switch 2, Switch Lite, Switch OLED, and Windows systems, offering an enhanced gaming experience with features like Hall Effect joysticks, adjustable vibration, programmable buttons, and a turbo function.
Eusi pakét
Punten parios yén sadaya barang aya dina pakét anjeun:
- AceGamer Wireless Controller
- Kabel Ngecas USB-C
- Manual pamaké
Image: The AceGamer Wireless Controller, USB-C charging cable, and user manual as included in the package.
Disetél
Initial Connection to Nintendo Switch/Switch 2
- Dina konsol Nintendo Switch anjeun, buka Menu HOME.
- Select 'Controllers' from the menu.
- Pilih 'Robah Cecekelan/Pesenan'.
- On the AceGamer controller, press and hold the 'Connect' button for 3 seconds until the LED indicators begin to flash.
- Once the controller is paired, the LED indicator will stop flashing and remain solid.
Video: Demonstrates the steps for connecting the AceGamer Wireless Controller to a Nintendo Switch or Switch 2 console.
Video: A short demonstration on how to connect the controller to the console.
Image: Visual guide for connecting the controller to a Nintendo Switch, showing console screens and controller buttons.
One-Button Wake-Up
After the initial connection, simply press the RUMAH button on the controller to wake up your Nintendo Switch device. (Note: This feature is not supported for Switch 2 console wake-up).
Image: The controller with the 'Home' button indicated for waking up the console.
Parentah Operasi
Tombol Layout
The AceGamer Wireless Controller features a standard layout with precise Hall Effect joysticks and responsive buttons for optimal control.
Gambar: A lengkep view of the controller's top surface, highlighting the action buttons, D-pad, and joysticks.
Motion Control and Vibration
The integrated 6-axis gyro sensor allows for quick reactions and improved experience in motion-controlled games. Dual vibration motors provide 4 adjustable feedback levels (0%, 30%, 70%, 100%) for immersive gameplay.
Image: Visual representation of the controller's 4-level vibration and 6-axis gyro sensor capabilities in action during gameplay.
Programmable Buttons (M1/M2)
The controller features M1 and M2 back buttons that can be programmed to simplify complex skill operations. Up to 16 buttons (A/B/X/Y/L/ZL/R/ZR/L3/R3/D-pad) can be assigned to M1/M2. Two programming modes are available: Single Assignment and Multiple Assignment.
Image: The back of the controller highlighting the M1 and M2 programmable buttons and their function.
Fungsi Turbo Burst
The controller supports both auto turbo and manual turbo modes with 3 adjustable burst speeds: 5 shots/s, 12 shots/s, and 20 shots/s.
Image: A visual representation of the controller's turbo function with different speed settings.
Pangropéa
Ngecas Controller
The controller features a built-in 800 mAh lithium battery. It takes approximately 3-4 hours to fully charge and provides up to 12 hours of continuous play. Use the provided USB-C charging cable to charge the device.
Image: The controller's battery capacity and estimated game/charge times are displayed.
Pamérésan masalah
Joystick Drift Calibration
If you experience joystick drift, perform the following calibration steps:
- Press and hold the 'L + R + Connect' buttons simultaneously. The channel lights 1, 3 and 2, 4 will flash alternately, indicating entry into 3D joystick and L2/R2 trigger calibration mode.
- Rotate both the left and right joysticks three times in a circular motion.
- Press the ZL and ZR triggers to the bottom three times each.
- Press the '+' button. The controller will vibrate, and LED2 will light up for 2 seconds before turning off, indicating successful calibration.
Video: A step-by-step guide on how to perform rocker calibration to fix joystick drift.
Image: A four-panel diagram detailing the process of calibrating the joysticks and triggers to resolve drift issues.
Inaccurate Motion Detection / Gyroscope Calibration
If you experience inaccurate motion detection, view drift, or pose misjudgment, calibrate the gyroscope:
- Pareuman controller.
- Press and hold the 'L1' + '+' + 'Connect' buttons simultaneously to enter gyroscope calibration mode. (LEDs 1, 2, 3, 4 will flash alternately).
- Press the '+' button. Light No. 3 will be on for 1 second and then off, completing the calibration.
Image: A three-panel diagram showing how to calibrate the gyroscope to correct motion detection issues.
spésifikasi
- merek: AceGamer
- model: B0FL2CRJLM
- Kasaluyuan: Nintendo Switch, Switch 2, Switch Lite, Switch OLED, Windows, iOS, Android
- Konektipitas: Nirkabel (Bluetooth), Kabel (USB-C)
- Kapasitas batré: 800 mAh
- Waktu Ngecas: 3-4 jam
- Waktu Maén Terus-terusan: Nepi ka 12 jam
- Sénsor gerak: 6-sumbu Gyro
- Geter: Dual motors with 4 adjustable levels (0%, 30%, 70%, 100%)
- Tombol anu tiasa diprogram: M1/M2 (assignable to 16 different buttons)
- Fungsi Turbo: Auto/Manual with 3 speeds (5, 12, 20 shots/s)
- ukuran: 5.91 x 1.38 x 3.94 inci
- Beurat barang: 11.99 ons
Garansi sareng Rojongan
AceGamer provides warranty service for this product. If you have any questions or encounter problems with your controller, please contact AceGamer customer support for an immediate solution. Contact information can typically be found on the product packaging or the official AceGamer websitus.
