Herdio HE-802B 8-Inch 600W Outdoor Passive Speakers Instruction Manual

1. Bubuka

Thank you for choosing Herdio HE-802B 8-Inch 600W Outdoor Passive Speakers. These speakers are designed to deliver powerful, clear audio in large outdoor and commercial environments. Featuring an 8-inch woofer and a 1-inch tweeter, they provide a wide soundstage and robust performance. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your speakers.

Image 1.1: Herdio HE-802B 8-Inch Outdoor Passive Speakers.

2. Émbaran Kasalametan

• Baca pituduh: Before installation and use, carefully read and understand all instructions.
• Sumber Daya: Ieu mangrupikeun spiker pasif sareng meryogikeun speaker éksternal amplifier/power source. Ensure the amplifier's output matches the speaker's power handling capabilities (up to 300W peak per speaker, 80W RMS).
• Wiring: Always connect speakers with the correct polarity (+ to + and - to -) to avoid phase issues and potential damage.
• Pamasangan: Use appropriate hardware and ensure the mounting surface can support the weight of the speakers. Improper installation can lead to injury or damage.
• Tahan cai: The speakers have an IP44 waterproof rating, meaning they are protected against splashing water from any direction. They are suitable for outdoor use but should henteu beuleum dina cai.
• panempatan: Avoid placing speakers near heat sources, direct sunlight for prolonged periods, or in areas with extreme temperatures.
• beberesih: Cabut daya sateuacan dibersihkeun. Anggo lawon anu lemes sareng garing. Hindarkeun bahan kimia anu keras atanapi pembersih anu abrasif.
• jasa: Do not attempt to service the speakers yourself. Refer all servicing to qualified personnel.

3. Eusi Paket

Pastikeun yén sadaya item aya dina pakét anjeun:

• Herdio HE-802B Outdoor Passive Speakers (2 units)
• Wall Mount Brackets (2 sets)
• Speaker Cables (2 units)
• Buku Panduan (1 unit)

Image 3.1: Included items: two speakers, two sets of wall mount brackets, two speaker cables, and the instruction manual.

4. Produk Langkungview

The Herdio HE-802B speakers are engineered for robust outdoor audio performance. Each speaker features:

• 8-Inch Injection Molded PP Cone Woofer: Provides deep and powerful bass response.
• 1-Inch PET Dome Tweeter: Ngahasilkeun frékuénsi luhur anu seukeut sareng jelas.
• Marine-Grade ABS Housing: Ensures durability and resistance to outdoor elements.
• Peunteun tahan cai IP44: Ngajaga tina cipratan cai.
• Rustproof, UV-Resistant Grille and Brackets: Designed for long-lasting outdoor use.
• 180° Adjustable Swivel Brackets: Allows for precise sound direction.

Image 4.1: Internal components of the speaker, showing the 8-inch woofer and 1-inch tweeter.

Gambar 4.2: Detil view of the speaker's side profile with dimensions, the 180-degree adjustable wall mount bracket, and the push-in terminal block for wiring.

5. Setup jeung Instalasi

The Herdio HE-802B speakers are passive and require an external amplifier for operation. Follow these steps for proper installation and connection:

5.1 Pasang Speaker

1. Pilih Lokasi: Select a suitable wall or surface that can securely hold the speaker's weight. Consider the desired sound coverage area.
2. Pasang kurung: Securely fix the wall mount brackets to the chosen surface using appropriate screws and anchors (not included). Ensure the brackets are level and firmly attached.
3. Speaker Gunung: Slide the speakers onto the installed brackets.
4. Saluyukeun Sudut: Use the 180° adjustable swivel mechanism to direct the sound to your preferred listening area. Tighten the adjustment screws to secure the speaker's position.

Image 5.1: Visual guide for mounting the speakers: 1) Fixing bracket securely, 2) Mounting speaker, 3) Adjusting speaker orientation.

5.2 Wiring the Speakers to an Amppangagung

These speakers require an external amplifier. The video below demonstrates the wiring process.

1. Siapkeun Kawat: Strip a small amount of insulation from the ends of the speaker cables.
2. Nyambung ka Amppanguat: Connect the speaker cables to the output terminals of your external amplifier. Ensure correct polarity: red wire to the positive (+) terminal and black wire to the negative (-) terminal.
3. Sambungkeun ka Speaker: Insert the other ends of the speaker cables into the push-in terminal blocks on the back of each Herdio speaker. Again, match positive (+) to positive (red terminal) and negative (-) to negative (black terminal).
4. Sambungan Aman: Ensure all wire connections are secure to prevent loose contacts or short circuits.

Image 5.2: Diagram illustrating how to connect the passive speakers to an external amplifier and power adapter. Note that the amplifier and power adapter are not included with the speakers.

6. Ngoperasikeun Speaker

Once the speakers are correctly installed and wired to an amplifier, you can begin operation.

6.1 Powering On and Source Selection

1. Daya Hurungkeun Amppanguat: Turn on your external amppangagung.
2. Pilih Input: Pilih sumber input anu pas dina amplifier (e.g., Bluetooth, AUX, USB) depending on how you wish to play audio.

6.2 Bluetooth Connection (if amplifier supports Bluetooth)

If your external amplifier has Bluetooth functionality, follow these steps to connect your device:

1. Aktipkeun Modeu Bluetooth: Ganti anjeun amplifier to Bluetooth mode. It should enter pairing mode, indicated by an audible prompt or LED.
2. Aktipkeun Bluetooth dina Alat: Dina smartphone anjeun, tablet, atawa alat Bluetooth-diaktipkeun sejen, buka setélan Bluetooth.
3. Pasangkeun Alat: Néangan nu amplifier's Bluetooth name (e.g., "Herdio HCS528" or similar) in the list of available devices and select it to pair.
4. Konfirmasi: Once connected, you will hear a confirmation sound from the speakers.

Rujuk ka anjeun amplifier's manual for specific instructions on Bluetooth pairing and other input modes.

7. Pangropéa

• beberesih: Lap wadah spiker sacara rutin nganggo kaén anu lemes,amp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Pamariksaan: Periodically check the mounting brackets and wiring connections for any signs of wear, corrosion, or looseness. Tighten connections as needed.
• Perlindungan Lingkungan: While designed for outdoor use, prolonged exposure to extreme weather conditions (e.g., heavy snow, direct torrential rain) may reduce lifespan. Consider protective covers if speakers are exposed to harsh conditions for extended periods.

8. Cara ngungkulan

• Henteu aya sora:
  • Pastikeun ampLampu dihurungkeun sareng sumber input anu leres dipilih.
  • Pariksa sadaya sambungan kabel speaker di duanana amplifier and the speakers for proper polarity and secure contact.
  • Verify the volume on your amplifier and source device is turned up.
• Sora distort:
  • Kurangi volume dina sora anjeun amplifier atawa alat sumber.
  • Pastikeun amplifier's power output is compatible with the speakers' power handling. Overpowering can cause distortion.
  • Check speaker wire connections for any frayed wires or short circuits.
• Masalah Sambungan Bluetooth:
  • Pastikeun Anjeun amplifier is in Bluetooth pairing mode.
  • Pastikeun Bluetooth alat anjeun diaktipkeun sareng aya dina jangkauan.
  • Pohokeun alat dina telepon/tablet anjeun teras cobian pasangkeun deui.
• Sora teu rata:
  • Check individual speaker connections and ensure both speakers are receiving a signal.
  • Verify the balance settings on your amppangagung.

9. Spésifikasi

Image 9.1: Summary of key product specifications for the Herdio HE-802B speakers.

Gambar 9.2: Diménsi produk anu lengkep pikeun perencanaan pamasangan.

10. Garansi jeung Rojongan

Herdio products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official Herdio websitus.