ASUS Prime AP202 ARGB White mATX PC Case Instruction Manual

1. Bubuka

The ASUS Prime AP202 ARGB White mATX case is designed for compact, high-performance PC builds. It features a fully curved tempered glass panel, supports graphics cards up to 420mm, 360mm radiators, and includes a patented slot vent, easy-detach rail system, and three pre-installed ARGB fans. This manual provides detailed instructions to help you set up, operate, and maintain your PC case.

2. Fitur konci

• Panoramic Curved Tempered Glass: A seamless curved tempered glass panel extends from the front to the side, offering an unobstructed view tina komponén internal.
• Easy-Detach Rail System: Panels can be removed and reattached safely and simply, facilitating easy access for building and maintenance.
• Patented Slot Vent: An innovative design provides optimal cooling for graphics cards, enhancing thermal performance.
• Integrated ARGB Light Band: A light band near the bottom of the case offers spectacular lighting effects, compatible with Aura Sync for seamless adaptation to user scenarios.
• Kipas ARGB anu tos dipasang sateuacanna: Three 120mm ARGB fans with extra-thick 28mm frames are included, providing optimal airflow and integrated with 20 addressable RGB LEDs for dual lighting.

Figure 1: ASUS Prime AP202 ARGB White mATX PC Case with curved tempered glass and internal ARGB fans.

3. Setup jeung Instalasi

Follow these steps to assemble your PC components within the ASUS Prime AP202 ARGB White mATX PC case.

3.1. Lengser Panel

The case features an easy-detach rail system for safe and simple panel removal. Gently pull the panels to detach them, providing full access to the internal chassis for component installation.

Angka 2: Ngabeledug view illustrating detachable panels and components for easy assembly.

3.2. Pamasangan motherboard

The ASUS Prime AP202 supports Micro-ATX and Mini-ITX motherboards. Secure your motherboard to the pre-installed standoffs using the provided screws.

3.3. Pamasangan kipas sareng radiator

The case supports radiators up to 360mm long. Three 120mm ARGB fans are pre-installed. Additional fans can be mounted for enhanced airflow. Ensure proper airflow direction (intake/exhaust) for optimal cooling.

Figure 3: Patented slot vent design for optimal graphics card cooling.

3.4. Pamasangan Kartu grafik

The case accommodates graphics cards up to 420mm in length. Install your graphics card into the appropriate PCIe slot on your motherboard and secure it with screws.

3.5. Pamasangan Power Supply Unit (PSU).

The case is compatible with PSUs up to 200mm in length. Install your PSU into its designated compartment, typically at the rear or bottom of the case, and secure it.

3.6. Manajemén kabel

Mangpaatkeun ample space behind the motherboard tray and the included cable ties to route and secure cables, ensuring clean aesthetics and unobstructed airflow.

Figure 4: Organized cable management for a clean build.

4. Parentah Operasi

4.1. Daya Hurung / Pareum

Press the power button located on the front I/O panel to turn the system on or off. The power LED will illuminate when the system is active.

4.2. Kontrol Lampu ARGB

The integrated ARGB light band and pre-installed fans are compatible with ASUS Aura Sync. Use the motherboard's software to customize lighting effects and synchronize them with other compatible components.

Figure 5: Integrated ARGB light band for customizable lighting effects.

Gambar 6: Panel I/O hareup kalayan tombol daya sareng port USB.

5. Pangropéa

5.1. Lebu Filter beberesih

Regularly clean the dust filters to maintain optimal airflow and prevent dust buildup inside the case. The filters are easily removable for cleaning.

5.2. beberesih umum

Use a soft, dry cloth to wipe down the exterior of the case. For the tempered glass panel, use a glass cleaner and a microfiber cloth to avoid scratches.

6. Cara ngungkulan

6.1. Taya Daya

• Ensure the power supply unit (PSU) is properly connected to the wall outlet and the power switch on the PSU is in the "ON" position.
• Verify all power cables from the PSU are securely connected to the motherboard and components.
• Pariksa sambungan switch kakuatan panel hareup kana motherboard nu.

6.2. Isu Overheating

• Ensure all case fans are spinning and properly oriented for optimal airflow (front/bottom for intake, rear/top for exhaust).
• Clean any dust buildup on fans, radiators, and dust filters.
• Pariksa heula kipas CPU sareng GPU naha tiasa dianggo kalayan leres.

6.3. Lampu ARGB Teu Jalan

• Check all ARGB cable connections from the fans and light band to the motherboard's ARGB headers or a dedicated controller.
• Ensure ASUS Aura Sync software (or equivalent motherboard software) is installed and configured correctly.

7. Spésifikasi

8. Garansi jeung Rojongan

Kanggo inpormasi garansi, dukungan téknis, atanapi patarosan layanan, mangga buka dukungan resmi ASUS. website or contact your local ASUS representative. Keep your purchase receipt for warranty validation.

Rojongan ASUS Websitus: https://www.asus.com/support/