roborock Q10 S5 Robot Vacuum and Mop Cleaner User Manual

1. Bubuka

Thank you for choosing the roborock Q10 S5 Robot Vacuum and Mop Cleaner. This manual provides essential information for setting up, operating, and maintaining your device to ensure optimal performance and longevity. Please read this manual thoroughly before using the product and keep it for future reference.

2. Émbaran Kasalametan

To reduce the risk of injury, electric shock, fire, or damage, please observe the following safety precautions:

• Alat ieu tiasa dianggo ku murangkalih umur 8 taun ka luhur sareng jalma anu kakurangan kamampuan fisik, indrawi atanapi mental atanapi kurang pangalaman sareng pangaweruh upami aranjeunna dipasihan pangawasan atanapi petunjuk ngeunaan panggunaan alat dina cara anu aman sareng ngartos bahaya anu aya. .
• Barudak kedah diawaskeun pikeun mastikeun yén aranjeunna henteu maén sareng alatna.
• Beberesih sareng pangropéa pangguna henteu kedah dilakukeun ku murangkalih tanpa pangawasan.
• Do not use the robot in areas with open flames or fragile objects.
• Ensure the charging dock is placed on a level surface against a wall.
• Ngan anggo adaptor daya asli anu disayogikeun sareng alat ieu.
• Do not expose the robot to direct sunlight or moisture.
• Before cleaning, remove power cords, small objects, and fragile items from the floor.

3. Produk Langkungview

Familiarize yourself with the components of your roborock Q10 S5 robot vacuum.

Gambar 1: The roborock Q10 S5 Robot Vacuum and Mop Cleaner. This image shows the top view of the robot, highlighting its sleek black design and main control buttons.

Komponén Robot:

• Panutup Top: Lifts to reveal the dustbin and Wi-Fi indicator.
• Tombol Daya/Beresih: Press to start/pause cleaning, hold to turn on/off.
• Dock/Spot Clean Button: Press to send the robot back to the dock, hold for spot cleaning.
• LDS Sensor: Pikeun navigasi sareng pemetaan.
• bemper: Ngadeteksi halangan.
• Sikat samping: Nyapu runtah ti sisi jeung juru.
• Sikat utama: Collects dirt and debris from floors. Features a floating design for better contact.
• Omnidirectional Wheel: Pikeun gerakan.
• Ngecas Kontak: Nyambungkeun ka dok ngecas.
• Sénsor Cliff: Prevents the robot from falling down stairs.
• Tangki Cai & Alas Pel: For mopping functionality.

Dok ngecas:

• Dock Location Beacon: Helps the robot locate the dock.
• Ngecas Kontak: Mindahkeun kakuatan ka robot.
• Power Cable Port: Nyambungkeun adaptor kakuatan.

4. Setélan

1. Ngabongkar Robot: Carefully remove the robot and all accessories from the packaging. Remove any protective films or shipping materials.
2. Install the Side Brush: Press the side brush onto its post until it clicks into place.
3. Tempatkeun Dok Pangisi Daya:
   • Simpen dok ngecas dina permukaan anu teuas sareng rata ngalawan témbok.
   • Pastikeun aya sahenteuna 0.5 méter (1.6 kaki) rohangan kosong di dua sisi sareng 1.5 méter (4.9 kaki) di payuneun dermaga.
   • Connect the power cable to the charging dock and plug it into a wall outlet.
4. Muatan Awal: Place the robot on the charging dock. The robot will automatically turn on and begin charging. For first-time use, fully charge the robot before operation (approximately 4-6 hours). The power indicator light will breathe white during charging and turn solid white when fully charged.
5. Unduh Aplikasi: Milarian pikeun "Roborock" in the App Store or Google Play Store, or scan the QR code on the packaging to download and install the app.
6. Nyambung ka Wi-Fi:
   • Open the Roborock app and follow the on-screen instructions to add your device.
   • Pastikeun telepon anjeun disambungkeun ka jaringan Wi-Fi 2.4 GHz.
   • Pencét jeung tahan tombol Dok jeung Kakuatan buttons simultaneously for 3 seconds until you hear the "Resetting Wi-Fi" voice alert.
   • Turutan pitunjuk aplikasi pikeun ngalengkepan sambungan.

5. Parentah Operasi

Ngamimitian Bersih:

• Ti Robot: Pencét éta Kakuatan button once. The robot will start cleaning.
• Tina Aplikasi: Open the Roborock app and tap the "Clean" button.

Pausing/Resuming/Stopping:

• Reureuh: Pencét tombol naon waé dina robot atanapi ketok "Pause" dina aplikasi.
• CV: Pencét éta Kakuatan button or tap "Resume" in the app.
• Eureun: To stop a cleaning cycle, press the Dok button to send the robot back to the charging dock, or tap "Stop" in the app.

Fungsi ngepel:

1. Tangki cai ngeusian: Open the water tank cover, fill with clean water, and close securely.
2. Attach Mop Pad: Wet the mop pad and wring it out. Slide it into the mop pad slot until it is securely attached.
3. Start Mopping: The robot will automatically detect the mop module and switch to mopping mode. You can adjust water flow levels in the app.

Fitur Aplikasi:

• Manajemén Peta: Create and save maps, set no-go zones, virtual walls, and invisible barriers.
• Selective Room Cleaning: Choose specific rooms to clean.
• Dijadwalkeun beberesih: Atur jadwal beberesih pikeun waktos sareng dinten anu béda.
• Modeu beberesih khusus: Atur kakuatan sedot sareng tingkat aliran cai.
• Kadali jauh: Ngadalikeun gerakan robot sacara manual.

6. Pangropéa

Regular maintenance ensures your roborock Q10 S5 operates efficiently. Always turn off the robot and unplug the charging dock before performing any maintenance.

Dustbin and Filter (Weekly):

1. Lift the top cover of the robot.
2. Cabut tong sampah.
3. Buka panutup tempat sampah teras buang eusina kana tempat sampah.
4. Remove the filter. Tap it gently to remove dust. The filter can be rinsed with water; ensure it is completely dry before reinstallation (allow 24 hours).
5. Rinse the dustbin with water if necessary and allow it to dry completely.
6. Reinstall the dry filter and dustbin.

Main Brush (Weekly):

1. Balikeun robot.
2. Press the tabs to remove the main brush cover.
3. Angkat sikat utama.
4. Use the cleaning tool (if provided) or scissors to cut and remove any hair or debris tangled around the brush.
5. Reinstall the main brush and cover, ensuring it clicks into place.

Side Brush (Monthly):

• Cabut sikat sampingna.
• Cabut bulu atanapi kokotor naon waé.
• Reattach and tighten the screw.

Sensors and Charging Contacts (Monthly):

• Wipe all sensors (cliff sensors, wall sensor, LDS sensor window) and the charging contacts on both the robot and the dock with a soft, dry cloth.

Mop Pad (After Each Use):

• Cabut pel pel tina bak cai.
• Rinse thoroughly with water and allow it to air dry completely before next use.

7. Cara ngungkulan

If you encounter issues with your robot, please refer to the following table before contacting support.

If the problem persists, please refer to the Roborock app for more detailed error messages or contact customer support.

8. Spésifikasi

Catetan: Spésifikasi tiasa robih tanpa aya bewara.

9. Garansi jeung Rojongan

roborock products are manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official roborock website. For technical support, troubleshooting assistance, or to purchase replacement parts, please contact roborock customer service through the app or their official websitus.

Resmi Websitus: www.roborock.com