Manual Pangguna Modul WiFi LoraTap SC500W-V4 pikeun Roller Shutters

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your LoraTap SC500W-V4 WiFi Module for roller shutters. This module allows you to transform traditional roller shutters into smart, controllable devices via the Smart Life application and voice commands.

2. Produk Langkungview

The LoraTap SC500W-V4 is a compact WiFi module designed for integration behind existing 2-button rocker or push-button switches. It enables precise control of roller shutters from 0% to 100% via a smartphone application or voice assistants like Alexa. The module operates on a 2.4 GHz WiFi network and does not require a separate hub.

Fitur konci:

• Compact size (47 × 48 × 16 mm) for easy installation.
• Precise 0-100% positioning control.
• Compatible with Smart Life app for remote control.
• Voice control support with Amazon Alexa.
• Customizable schedules and scene automation.
• Supports 2-button rocker and momentary switches.
• Compatible with 230V motors up to 300W.

3. Émbaran Kasalametan

WARNING: Electrical installation should only be performed by a qualified electrician. Ensure power is disconnected at the main circuit breaker before any installation or maintenance work.

• Do not exceed the maximum load of 300W.
• Ensure proper wiring connections to prevent short circuits or damage.
• Alat ieu kanggo dianggo di jero rohangan wungkul.
• Jauhkeun tina jangkauan barudak.

4. Eusi Paket

Mangga parios pakét kanggo barang-barang ieu:

• LoraTap SC500W-V4 WiFi Module
• Pamasangan Hardware
• Manual Pamaké Multilingual

5. Setup & Instalasi

5.1 Diagram Wiring

Refer to the diagram below for correct wiring. Ensure all connections are secure.

Gambar 1: Wiring diagram for the LoraTap SC500W-V4 WiFi Module. It shows connections for Input AC (N, L), Motor (Brown, Black wires to L1, L2), and external switch connections (S1, S2). The module also displays its model number SC500W, voltage range 100-250V, 50/60Hz, and max 300W load.

5.2 Instalasi fisik

1. Pegatkeun Daya: Turn off the main power supply to the circuit at your home's circuit breaker.
2. Hapus saklar anu aya: Carefully remove your existing 2-button roller shutter switch from the wall box.
3. Kawat Modul: Connect the LoraTap module according to the wiring diagram (Image 1). Connect the Live (L) and Neutral (N) wires from your power supply to the corresponding terminals on the module. Connect the motor's UP and DOWN wires to L1 and L2 respectively. Connect your existing wall switch to S1 and S2.
4. Selapkeun Modul: Place the compact module into the standard flush-mounted wall box (Ø 60 mm) behind your existing switch.
5. Pasang deui Saklar: Reattach your existing 2-button switch over the module.
6. Mulangkeun Daya: Hurungkeun deui catu daya utama.

5.3 Kompatibilitas Switch

The module is compatible with two types of switches:

• Rocker Switch (Wippschalter): Stays in position after being pressed.
• Momentary Switch (Taster): Springs back to its original position after being pressed.

Note: Not compatible with 3-button wall switches.

Gambar 2: Illustration showing the LoraTap module's compatibility with a rocker switch (Wippschalter) and a momentary push-button switch (Taster). It explicitly states incompatibility with 3-button wall switches.

5.4 Pamasangan Aplikasi & Papasangan

1. Unduh App: Unduh aplikasi 'Smart Life' ti toko aplikasi telepon pinter anjeun (iOS atanapi Android).
2. Ngadaptar/Log: Jieun akun atanapi lebet kana akun Smart Life anjeun anu tos aya.
3. Tambahkeun Alat: In the app, tap '+' to add a new device. Select 'Curtain Switch' or 'Shutter Switch'.
4. Enter WiFi Details: Ensure your phone is connected to a 2.4 GHz WiFi network. Enter your WiFi password.
5. Mode Papasangan: Follow the app instructions to put the module into pairing mode. This usually involves pressing and holding a button on the module or performing a specific sequence with the connected wall switch until an indicator light flashes rapidly.
6. Papasangan lengkep: The app will detect and connect to the module. Once connected, you can rename the device.

5.5 Kalibrasi

Before first use, calibration is essential for accurate 0-100% positioning. If needed, recalibration can be performed at any time through the Smart Life app.

Gambar 3: A smartphone screen displaying the Smart Life app interface, showing a roller shutter at 32% open. A note below the image emphasizes the necessity of calibrating the roller shutter before first use for precise control.

6. Parentah Operasi

6.1 Kontrol Manual

You can operate the roller shutter using the connected 2-button wall switch as usual. The module will register these actions.

6.2 App Control (0-100% Positioning)

Open the Smart Life app and select your roller shutter module. You can precisely adjust the shutter's position from 0% (fully closed) to 100% (fully open) using a slider or by entering a specific percentage. This allows for fine-tuned light and privacy control.

Gambar 4: A woman at an airport lounge using her smartphone to remotely control a roller shutter, demonstrating the remote control capability of the Smart Life app. The app interface shows 'Open' and 'Closing' options.

6.3 Kontrol Sora (Alexa)

Once integrated with Amazon Alexa, you can control your roller shutters using voice commands. Ensure your Alexa device is linked to your Smart Life account.

• "Alexa, open the [Shutter Name]."
• "Alexa, close the [Shutter Name]."
• "Alexa, set [Shutter Name] to 50 percent."

Gambar 5: An Amazon Echo Dot device on a table next to a window with a roller shutter. A speech bubble indicates an Alexa command: "Alexa, open the roller shutters to 30%," with an "OK" response, illustrating voice control functionality.

6.4 Scheduling and Scenes

The Smart Life app allows you to create custom schedules and scenes to automate your roller shutters.

• Daily Routines: Set specific times for opening and closing, such as waking up with the sunrise or closing for privacy in the evening.
• Otomatis Panonpoé Panonpoé / Panonpoé Tilelep: Configure the shutters to automatically adjust based on local sunrise and sunset times.
• Manajemén Panas: Automate closing during the hottest part of the day to help keep rooms cooler.
• Jauh Mode: Create scenes to simulate occupancy when you are away, enhancing security.

Gambar 6: A woman stretching in bed as natural light enters through partially opened roller shutters. A smartphone screen shows the Smart Life app with settings for sunrise automation, allowing for adjustable offsets (e.g., 5 minutes before/after sunrise) and percentage kontrol.

Gambar 7: A dog sleeping peacefully on the floor next to a window with roller shutters closed, illustrating the benefit of automatic closing at 2:00 PM to keep the home cooler during hot afternoons.

7. Pangropéa

The LoraTap SC500W-V4 module requires minimal maintenance. Ensure the area around the module and switch is kept clean and free from dust. Periodically check for firmware updates within the Smart Life app to ensure optimal performance and access to new features.

8. Cara ngungkulan

• Modul teu ngaréspon:
  • Pariksa lamun catu daya utama hurung.
  • Pariksa yén sambungan kabelna aman sareng leres.
  • Ensure your WiFi network (2.4 GHz) is active and the module is within range.
  • Attempt to re-pair the device with the Smart Life app.
• Roller shutter not moving correctly (e.g., not reaching full open/close):
  • Perform a calibration process through the Smart Life app.
  • Check for any physical obstructions preventing the shutter from moving freely.
• Kontrol sora teu jalan:
  • Ensure your Alexa device is properly linked to your Smart Life account.
  • Verify the device name in Smart Life matches the name used in Alexa commands.
  • Pariksa sambungan internét anjeun.
• Masalah konektipitas aplikasi:
  • Confirm your router is broadcasting a 2.4 GHz WiFi signal. The module does not support 5 GHz WiFi.
  • Restart your WiFi router and the module (by cycling power).

9. Spésifikasi

10. Garansi jeung Rojongan

For warranty information and technical support, please contact LoraTap directly. Details regarding spare parts availability are not provided. Please refer to the manufacturer's official website or the contact information provided in your product packaging for assistance.