LEHMANN LHOSJ-6045

LEHMANN LHOSJ-6045 Centrifugal Juicer

Instruksi Manual

Bubuka

Hatur nuhun pikeun meuliasing the LEHMANN LHOSJ-6045 Centrifugal Juicer. This manual provides important information on how to safely and effectively operate and maintain your new juicer. Please read these instructions thoroughly before first use and keep them for future reference.

Parentah Kasalametan penting

Nalika nganggo alat listrik, pancegahan kaamanan dasar kedah diturutan, kalebet ieu:

Idéntifikasi Bagian

Familiarize yourself with the components of your LEHMANN LHOSJ-6045 Centrifugal Juicer:

Ngabeledug view of LEHMANN LHOSJ-6045 Centrifugal Juicer components

Gambar: Ngabeledug view showing all detachable parts of the juicer for easy identification and assembly.

Setup sareng Majelis

Before first use, wash all detachable parts (food pusher, cover, filter basket, pulp container, juice container) in warm soapy water, rinse thoroughly, and dry. Wipe the motor base with a damp lawon.

  1. Tempatkeun dasar motor dina permukaan anu stabil, datar, sareng garing.
  2. Insert the filter basket securely onto the motor base. Ensure it clicks into place.
  3. Place the transparent cover over the filter basket and align the feed chute with the opening on the base.
  4. Gantelkeun konci clamp to secure the cover to the motor base. Ensure it is firmly locked.
  5. Position the pulp container under the pulp spout.
  6. Teundeun wadah jus handapeun spout jus.
  7. Selapkeun pusher dahareun kana saluran feed.
Assembled LEHMANN LHOSJ-6045 Centrifugal Juicer

Gambar: The LEHMANN juicer fully assembled and ready for use, showing the main unit, pulp container, and juice container.

Parentah Operasi

Nyiapkeun Buah sareng Sayuran

Hand feeding carrots into the juicer's wide chute

Gambar: A hand demonstrating how to feed prepared carrots into the juicer's wide feed chute.

Prosés Juicing

  1. Ensure the juicer is correctly assembled and the juice and pulp containers are in place.
  2. Colokkeun alat kana stop kontak listrik.
  3. Hurungkeun kenop kadali laju ka setelan nu dipikahoyong:
  4. Gradually feed the prepared ingredients into the feed chute using the food pusher. Do not force ingredients down.
  5. The fresh juice will flow into the juice container, and the pulp will collect in the pulp container.
  6. Once juicing is complete, turn the speed control dial to '0' (off) and unplug the appliance.
Fresh juice flowing into the juice container

Gambar: Close-up of fresh juice being extracted and flowing into the designated juice container.

Hand removing the juice container from the juicer

Gambar: A hand carefully removing the filled juice container from the juicer after the juicing process.

Pangropéa jeung beberesih

Beberesih rutin mastikeun kinerja anu optimal sareng manjangkeun umur juicer anjeun. Salawasna cabut colokan alat sateuacan dibersihkeun.

Disassembly pikeun beberesih

  1. Turn the speed control dial to '0' and unplug the juicer.
  2. Leupaskeun pusher dahareun.
  3. Buka konci konci clamp and remove the transparent cover.
  4. Angkat karanjang saringan kalawan ati-ati.
  5. Remove the pulp container and empty it.
  6. Cabut wadah jus.

Parentah beberesih

Close-up of the juicer's filter basket with pulp residue

Gambar: A nutup-up view of the stainless steel filter basket, showing accumulated pulp after juicing, highlighting the area that requires thorough cleaning.

Pamérésan masalah

If you encounter issues with your juicer, please refer to the following common problems and solutions:

MasalahMungkin Cukang lantarananaSolusi
Juicer teu hurung.Teu acan dipasang; konci kaamanan teu dipasang; catu daya teu nyambungtage.Check power cord; ensure locking clamp is securely fastened; check power supply.
Motor eureun salila operasi.Overload protection activated; too much pressure on food pusher; filter basket clogged.Unplug, wait 15-20 minutes for motor to cool; reduce pressure; clean filter basket.
Ngahasilkeun jus rendah atanapi bubur baseuh.Filter basket clogged; incorrect speed setting for ingredients.Clean filter basket thoroughly; use higher speed for harder produce.
Geter kaleuleuwihan atawa noise.Filter basket not properly seated; appliance on an uneven surface.Reassemble filter basket correctly; place juicer on a stable, flat surface.

Spésifikasi produk

FiturRincian
merekLEHMANN
Nomer modélLHOSJ-6045
Kakuatan600 Watt
Voltage230 volt
Laju2 (Handap/Luhur)
Kapasitas Wadahna bubur1.5 liter
Kapasitas Wadah Jus450 mililiter
Feed Chute Diameter65 mm
BahanStainless Steel, Plastik
WarnaStainless Steel jeung Hideung
Ukuran (L x W x H)17.5 x 28 x 29.6 cm
Beurat2.14 kg
Fitur hususEasy to clean, Quiet motor, Overheat protection
Parentah perawatanDishwasher bagian aman
Dimensions of the LEHMANN LHOSJ-6045 Centrifugal Juicer

Gambar: Diagram illustrating the dimensions (length, width, height) of the LEHMANN LHOSJ-6045 Centrifugal Juicer.

Garansi sarta Rojongan Palanggan

Émbaran jaminan

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official LEHMANN websitus pikeun istilah jeung kaayaan jaminan lengkep. Simpen bukti pameseran anjeun pikeun klaim garansi.

Rojongan Palanggan

For any questions, technical assistance, or if you require spare parts, please contact LEHMANN customer support. Contact details can typically be found on the manufacturer's websitus atanapi dina bahan bungkusan.

Websitus: Visit the LEHMANN Store

Dokumén Patali - LHOSJ-6045

Praview Lehmann Firmware Updater: Parentah Operasi pikeun Konci sareng Pamiarsa RFID
Dokumén ieu nyayogikeun pitunjuk operasi pikeun parangkat lunak LEHMANN Firmware Updateater, ngajéntrékeun cara ngapdet firmware dina konci Lehmann, pamaca RFID, sareng terminal. Ngawengku syarat sistem, produk anu cocog, sareng pituduh léngkah-léngkah.
Praview LEHMANN Manajemén Software Guide pamaké: Konfigurasi sarta Operasi
Buku pituduh komprehensif pikeun LEHMANN Management Software (LMS), detailing konfigurasi, operasi, jeung manajemen sistem LEHMANN RFID dina mode offline boh online. Nyertakeun transponder sareng manajemén konci, setélan pangguna, sareng administrasi sistem.
Praview LEHMANN CNC Rotary Tables - Edition Katalog Utama 4 | PGD, E, DD Series
Edisi Katalog Utama LEHMANN 4 pikeun Tables Rotary CNC. Jelajahi PGD, E-Series, DD Series, sareng seueur deui. Leyuran-speed tinggi, backlash-gratis pikeun automation industri jeung manufaktur precision.
Praview LEHMANN VERTO RFID MIFARE Bedienungsanleitung | Elektronisches Schließsystem
Umfassende Bedienungsanleitung für das LEHMANN VERTO RFID MIFARE elektronische Schließsystem. Erfahren Sie mehr über Installation, Konfiguration, Betrieb und Fehlerbehebung.
Praview LEHMANN GIRO TA Elektronisches Tastaturschloss mit P2/P4 Adapter - Bedienungsanleitung
Umfassende Bedienungsanleitung für das LEHMANN GIRO TA elektronische Tastaturschloss mit P2/P4 Adapter. Enthält Informationen zur Installation, Bedienung, Sicherheit, Wartung, Konfiguration und Fehlerbehebung.
Praview LEHMANN PRIMEWASH 2800 - Instrukcja Obsługi | Bezpieczeństwo i Użytkowanie
Instrukcja obsługi odkurzacza piorącego LEHMANN PRIMEWASH 2800. Dowiedz się, jak bezpiecznie i efektywnie korzystać z urządzenia, poznaj jego funkcje, konserwację i warunki gwarancji.