Imagebon 11.25'' Wireless Apple CarPlay & Android Auto with 4K Dash Cam Instruction Manual

1. Bubuka

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Imagebon 11.25'' Wireless Apple CarPlay & Android Auto system. This device enhances your driving experience by integrating smartphone functionalities, advanced navigation, and dual-channel recording capabilities directly into your vehicle. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Eusi Paket

Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:

• Imagebon 11.25'' Wireless Apple CarPlay & Android Auto Display
• Car Charger (Type-C power cord)
• 10m Reversing Camera with Extension Cable
• Braket Perekat
• Long Arm Suction Cup Bracket
• Kabel AUX
• Manual pamaké
• GPS Antenna (if included with specific model variant)

Figure 1: Imagebon 11.25'' Display and all included accessories.

3. Setup & Instalasi

3.1 Pasang Tampilan

Choose between the adhesive bracket for a permanent dashboard mount or the long arm suction cup bracket for flexible positioning on the dashboard or windshield. Ensure the mounting surface is clean and dry before application.

1. Select your preferred mounting location, ensuring it does not obstruct your view atanapi ngaganggu kontrol nyetir.
2. Attach the chosen bracket to the back of the display unit.
3. Secure the display with the bracket to your chosen location. For adhesive mounts, press firmly for several seconds. For suction cup mounts, ensure the suction cup is clean and the lever is locked into place.

3.2 Sambungan Daya

Connect the provided car charger to the Type-C port on the display unit and plug the other end into your vehicle's cigarette lighter socket. Ensure the charging head is at least 5V/3A for optimal performance. For first-time use, charge the device for at least 10 minutes non-stop.

3.3 Pamasangan kaméra pungkur

The rear camera provides a 1080P full HD view and is essential for the real-time reversing view fitur.

1. Mount the rear camera on the back of your car, typically near the license plate or above it.
2. Route the camera's extension cable from the rear of the car to the display unit, typically along the vehicle's headliner and A-pillar, tucking it under the trim for a clean installation.
3. Connect the red wire of the camera cable to the positive terminal of your vehicle's reversing light. This ensures the camera activates automatically when reversing.
4. Connect the two sockets of the rear camera's extension cable to the AV IN port on the display unit.

Figure 2: Illustration of the rear camera wiring and installation process.

4. Konektipitas

4.1 Wireless Apple CarPlay Connection

Connect your iPhone wirelessly to access CarPlay features.

1. Dina iPhone anjeun, buka Setélan > Bluetooth and search for the device (e.g., "qckj_pnd_****").
2. Ketok pikeun nyambung.
3. Wait for a pop-up on your iPhone asking to "Use CarPlay with SmartScreen?". Select Paké CarPlay.
4. CarPlay will now be active on your Imagebon display.

Figure 3: Visual guide for Apple CarPlay connection.

4.2 Wireless Android Auto Connection

Connect your Android phone wirelessly to access Android Auto features.

1. On your Android phone, go to Setélan > Alat disambungkeun > Bluetooth and search for the device (e.g., "qckj_pnd_****").
2. Tap to connect and wait for the "Bluetooth pairing" pop-up box.
3. Pencét papasangan and wait for the screen to cast.
4. Android Auto will now be active on your Imagebon display.

Figure 4: Visual guide for Android Auto connection.

4.3 Mirror Link (Airplay/Miracast)

The display supports wireless mirroring for both Android (Miracast) and iOS (Airplay) devices.

1. On your smartphone, enable Wi-Fi and connect to the display's Wi-Fi network (e.g., "qckj_pnd_****").
2. For iOS devices, open the Control Center and select Pangeunteungan layar, then choose "SmartScreen".
3. For Android devices, access your phone's screen projection settings (often found under "More connections" or "Cast") and select the display's name.

Figure 5: Airplay connection steps for iOS devices.

Figure 6: Miracast connection steps for Android devices.

4.4 Modeu Kaluaran Audio

The device offers four audio output modes to integrate with your vehicle's sound system:

• pribumi: Audio plays directly from the display's internal speaker.
• Bluetooth (BT): Connect the display to your car's Bluetooth system for audio output.
• FM: Transmit audio to your car's FM radio by tuning both devices to the same frequency.
• AUX: Use the provided AUX cable to connect the display to your car's AUX input.

Gambar 7: Leuwihview of available audio output options.

5. Ngoperasikeun Dash Cam

5.1 Dual Dash Cam Recording

The device features a dual-lens dash cam system:

• Kaméra hareup: Records in stunning 4K Ultra HD with a wide-angle lens.
• Kaméra tukang: Captures in 1080P Full HD.

Both cameras record simultaneously, providing comprehensive coverage of your drive.

Figure 8: Dual dash cam capabilities with 4K front and 1080P rear recording.

5.2 Ngarekam loop

The dash cam supports loop recording, ensuring continuous capture of new footage. It supports up to 128GB storage for seamless loop recording. An SD card is not included and must be purchased separately.

Figure 9: Seamless loop recording functionality.

5.3 Real-time Reversing View

When the vehicle is put into reverse, the display automatically switches to the rear camera view, providing a wide 150° angle, adjustable reverse lines, and IP67 waterproof protection for enhanced safety during parking maneuvers.

Figure 10: Real-time reversing view with parking assistance.

5.4 Visi Peuting Anu Unggul

The dash cam system is equipped with superior night vision capabilities, featuring 4K UHD for the front camera and an F1.8 aperture, ensuring clear recordings even in low-light conditions.

Figure 11: Superior night vision for clear recordings in low light.

6. Fitur tampilan

6.1 11.25'' In-Cell Touch Panel

The display features a large 11.25-inch in-Cell touch panel with a 1920*720 resolution. In-Cell technology provides a simplified structure with an ultra-narrow bezel and slim thickness, offering rapid response and improved picture clarity compared to traditional On-Cell technology.

Figure 12: In-Cell Touch Panel Technology benefits.

6.2 Automatic Day/Night Brightness

The device automatically switches between day and night modes using built-in light sensors. You can also manually adjust screen brightness in the settings. The default daytime brightness is from 6 AM to 6 PM, with the remaining time defaulted to night brightness.

6.3 Kontrol sora

Utilize voice control features like Siri (for Apple CarPlay) or Google Assistant (for Android Auto) to manage calls, music, and navigation hands-free, enhancing driving safety.

Figure 13: Voice control for hands-free operation.

6.4 Multiple Split Screen Modes

The large 11.25-inch display supports multiple split-screen modes, allowing you to view navigation, music, and other applications simultaneously for enhanced multitasking while driving.

Figure 14: Multiple split screen modes for enhanced functionality.

7. Pangropéa & Perawatan

• beberesih: Use a soft, dry cloth to clean the display. Avoid abrasive cleaners or solvents.
• Apdet parangkat lunak: The device supports automatic Over-The-Air (OTA) updates to ensure optimal performance and access to the latest features. Ensure the device is connected to a stable Wi-Fi network for updates.
• Suhu: Hindarkeun ngalaan alat ka suhu anu ekstrim.

8. Cara ngungkulan

• Henteu aya kakuatan: Ensure the car charger is securely plugged into both the device and the cigarette lighter socket. Verify the vehicle's power outlet is functional.
• Connectivity Issues (CarPlay/Android Auto): Ensure Bluetooth and Wi-Fi are enabled on your smartphone and the device. Try restarting both the device and your phone. Clear previous pairings and attempt to reconnect.
• Henteu aya Audio: Check the selected audio output mode (Native, BT, FM, AUX) and ensure your car's audio system is correctly configured for that input. Adjust volume levels on both the device and your car stereo.
• Kaméra Dasbor Teu Ngarékam: Ensure an SD card (up to 128GB) is inserted correctly. Check if loop recording is enabled in the settings.
• Kacaangan layar: If screen brightness is not changing automatically, check the auto icon in the brightness settings. Manual adjustment is also available.

9. Spésifikasi

10. Jaminan & Dukungan

For warranty information and technical support, please refer to the documentation included in your product packaging or visit the official Imagebon websitus. Simpen resi pameseran anjeun pikeun klaim jaminan.