1. Produk Langkungview
The Waveshare Industrial 8-Channel ESP32-S3 WiFi Relay Module is a high-performance control unit designed for industrial automation and IoT applications. It integrates an ESP32-S3 microcontroller, offering robust wireless communication capabilities (Wi-Fi and Bluetooth LE), multiple isolation protection circuits, and versatile connectivity options including isolated RS485 and an Ethernet port with optional Power over Ethernet (PoE).
This module features 8 high-quality relays and 8 digital inputs, making it suitable for controlling various devices and monitoring industrial signals. Its design emphasizes reliability and safety in demanding environments.
2. Fitur konci
- ESP32-S3 Microcontroller: Equipped with an Xtensa 32-bit LX7 dual-core processor, operating at up to 240 MHz for efficient processing.
- Konéktipitas nirkabel: Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode communication for flexible network integration.
- 8-Channel Relays: High-quality relays with a contact rating of ≤10A 250V AC / 30V DC, suitable for various loads.
- 8-Channel Digital Inputs: Supports both passive (dry contact) and active (wet contact) digital inputs with bi-directional optocoupler isolation.
- Isolated RS485 Interface: For reliable connection to Modbus industrial modules or sensors, featuring hardware automatic control and protection circuits (TVS diode, surge protection, ESD protection).
- Port Ethernet: Onboard W5500 Ethernet chip for 10/100Mbps network communication.
- Kakuatan kana Ethernet (Poe): Optional version supports IEEE 802.3af standard for combined power and data over a single Ethernet cable.
- Input Daya Fleksibel: Supports USB Type-C (5V) for power, debugging, and firmware, and a wide 7-36V DC screw terminal input for industrial applications.
- RTC Chip: Onboard Real-Time Clock for scheduled tasks and time-sensitive operations.
- Multiple Isolation Protection: Includes optocoupler isolation, power isolation, and digital isolation to prevent interference and ensure stable operation.
- Indikator Status: Built-in RGB LED, PWR, TXD, and RXD indicators for monitoring device status.
- Kandang: Rail-mounted ABS protective case for easy installation and enhanced safety.
3. Eusi Paket
Pastikeun yén sadaya barang aya sareng dina kaayaan anu saé nalika muka bungkusan.
- ESP32-S3-POE-ETH-8DI-8RO Module x 1
- 2.4G 4dBi SMA Antenna x 1
- Obeng x 1
4. Setup jeung Instalasi
4.1 Sambungan Power Supply
The module supports multiple power input methods:
- USB Tipe-C: Connect a 5V USB power source to the USB Type-C port for power, debugging, and firmware uploading.
- Screw Terminal: Connect a 7-36V DC power supply to the designated screw terminals. Ensure correct polarity.
- Kakuatan kana Ethernet (Poe): For the PoE version, connect an 802.3af compliant PoE switch or router to the Ethernet port. This provides both power and network connectivity through a single cable.
4.2 Konektipitas jaringan
- Wifi: Attach the provided 2.4G SMA antenna to the external antenna connector. Configure Wi-Fi settings via firmware.
- Bluetooth LE: The module supports Bluetooth LE for short-range wireless communication.
- Ethernet: Connect a standard Ethernet cable to the RJ45 port for wired network access.
4.3 Sambungan Relay
The module provides 8 relay channels. Each relay has Normally Open (NO) and Common (COM) contacts. Refer to the diagram for wiring examples.
4.4 Digital Input Connections
The 8 digital inputs support both passive (dry contact) and active (wet contact) signals. Ensure proper wiring based on the sensor type.
4.5 panganteur RS485
Connect RS485 devices (e.g., Modbus modules, sensors) to the isolated RS485 screw terminals. The interface features hardware automatic control for data direction and includes protection circuits.
4.6 Enclosure and Mounting
The module is housed in a rail-mounted ABS protective case, designed for easy installation in industrial control cabinets using a 35mm DIN rail.
5. Parentah Operasi
5.1 Ngahurungkeun sareng Konfigurasi Mimiti
After connecting the power supply, the PWR LED should illuminate. The module can be configured via its Wi-Fi interface (AP mode), Ethernet, or through a serial connection via the USB Type-C port. Refer to the Waveshare Wiki for detailed programming and configuration guides.
5.2 Relay Control
The 8 relays can be controlled programmatically via the ESP32-S3 microcontroller. This allows for switching AC or DC loads based on logic defined in the firmware.
5.3 Digital Input Monitoring
Monitor the status of the 8 digital inputs to detect external events from sensors, switches, or other industrial signals. The bi-directional optocoupler isolation ensures signal integrity and protection.
5.4 RS485 Komunikasi
Utilize the isolated RS485 interface for communication with other industrial devices, typically using the Modbus protocol. This enables data exchange and control within an industrial network.
5.5 Firmware Upload and Debugging
Connect the module to a computer via the USB Type-C port. Use the appropriate development environment (e.g., Arduino IDE, ESP-IDF) to upload custom firmware and debug applications.
6. Tata Letak Papan sareng Komponenna
Understanding the board layout is crucial for proper connection and operation. The following diagrams highlight key components and their functions.
6.1 Puncak View
- ESP32-S3-WROOM-1U-N16R8 (ESP32-S3 module)
- 8-channel quality relays
- Optocoupler isolation for relays
- Tombol RESET
- PoE header (for PoE module)
- Tombol BOOT
- IC kakuatan
- Digital isolation
- Power supply isolation
- Bi-directional optocoupler isolation
- wadah batré RTC
- Buzzer
- Digital input screw terminals
- Pin header (for other devices)
- LED indicators (PWR, RXD, TXD)
- Konektor USB Type-C
- WS2812 RGB LED
- port Ethernet
- Panyambung anténeu éksternal
- Power supply screw terminal
- Panganteur komunikasi RS485
- RS485 matching resistor jumper
- Relay screw terminals
6.2 Handap View
- Onboard TVS (Transient Voltage Suppressor)
- RS485 conversion chip
- MP1605GTF-Z (DC-DC power module)
- PCF85063ATL (RTC chip)
- TCA9554PWR (GPIO expansion chip)
- W5500 (Ethernet chip)
- slot kartu TF
7. Spésifikasi
| Kategori | Parameter | Nilai |
|---|---|---|
| Mikrokontroler | Modul | ESP32-S3-WROOM-1U-N16R8 (ESP32-S3) |
| Prosesor | Xtensa 32-bit LX7 dual-core, nepi ka 240 MHz | |
| Komunikasi Nirkabel | Wifi | 2.4GHz (802.11 b/g/n) |
| Bluetooth | Bluetooth 5, BLE | |
| USB | Panyambung | USB Tipe-C |
| Sasayogian tanaga | 5V | |
| Isolated Communication Interface | Panganteur | RS485 |
| Panyalindungan | Dioda TVS, panyalindungan lonjakan & panyalindungan ESD | |
| Antarbeungeut Ethernet | Palabuhan | PoE Ethernet port (IEEE 802.3af standard for PoE version) |
| Masukan Digital | Saluran Input | 8 |
| Masukan Voltage | 5V-36V | |
| Tipe Input | Passive input / active input (NPN or PNP type) | |
| Tipe Isolasi | Bi-directional optocoupler isolation | |
| Relay | Saluran Relay | 8 |
| Kontak Rating | ≤10A 250V AC / 30V DC | |
| Formulir Kontak | 1NO 1NC | |
| Isolasi | isolasi optocoupler | |
| Indikator LED | RGB | Programmable color LED |
| PWR | Indikator kakuatan beureum | |
| TXD | Green TX indicator | |
| RXD | Blue RX indicator | |
| Power Supply Screw Terminal | Voltage Rentang | 7-36V |
| Penampilan | Kapungkur | Rail-mount ABS protective case |
| Diménsi | 175 × 90 × 40 (mm) |
8. Pangropéa
The Waveshare Industrial 8-Channel ESP32-S3 WiFi Relay Module is designed for robust industrial use. To ensure its longevity and reliable operation:
- Kaayaan Lingkungan: Operate the module within specified temperature and humidity ranges. Avoid exposure to excessive dust, moisture, or corrosive substances.
- beberesih: Upami diperlukeun, gently ngabersihan exterior modul jeung lemes, lawon garing. Ulah make cleaners cair atawa pangleyur.
- Pembaruan firmware: Regularly check the Waveshare Wiki for firmware updates to ensure optimal performance and access to new features.
- Sambungan: Periodically inspect all screw terminal connections to ensure they are secure and free from corrosion.
9. Cara ngungkulan
If you encounter issues with your Waveshare Industrial 8-Channel ESP32-S3 WiFi Relay Module, consider the following troubleshooting steps:
- Henteu aya kakuatan:
- Check if the power supply (USB-C or 7-36V terminal) is correctly connected and providing the specified voltage.
- Ensure the PWR LED is illuminated. If not, verify the power source.
- For PoE versions, confirm the Ethernet cable is connected to an active PoE switch/injector.
- No Network Connectivity (Wi-Fi/Ethernet):
- Wifi: Ensure the antenna is securely attached. Verify Wi-Fi credentials and network availability. Try resetting the module.
- Ethernet: Check the Ethernet cable connection. Confirm the network switch/router is operational.
- Relays Not Actuating:
- Verify the control logic in your firmware.
- Check the power supply to the module and the load connected to the relay.
- Ensure the load current and voltage do not exceed the relay's contact rating.
- Digital Inputs Not Responding:
- Confirm correct wiring for passive (dry contact) or active (wet contact) sensors.
- Check the sensor's functionality independently.
- Pariksa input voltage range for active inputs (5V-36V).
- RS485 Communication Issues:
- Check wiring polarity (A/B).
- Ensure the RS485 matching resistor jumper is correctly set if needed.
- Verify baud rate and communication parameters in your software.
For further assistance, consult the official Waveshare Wiki resources or contact Waveshare technical support.
10. Rojongan jeung Sumberdaya
Waveshare provides comprehensive resources to assist users with their products:
- Wiki Resmi: The Waveshare Wiki is the primary source for detailed documentation, programming guides, sample code, and technical specifications. Visit the Waveshare store page and look for the Wiki link.
- Bantosan Téknis: For specific technical inquiries or issues not covered in the documentation, please contact Waveshare customer support through their official channels.
10.1 Émbaran jaminan
Warranty terms and conditions for this product are provided by Waveshare. Please refer to the product packaging or the official Waveshare websitus kanggo inpormasi garansi lengkep.
