Produk Leuwihview
The Qidoe 66W 12V USB Outlet is a versatile car charger designed for vehicles, boats, marine applications, and RVs. It features four charging ports: two Power Delivery (PD) ports and two Quick Charge 3.0 (QC3.0) ports, allowing for simultaneous fast charging of multiple devices. An integrated voltmeter provides real-time voltage monitoring of your vehicle's battery.
Image: The Qidoe 66W 12V USB Outlet, showing its four USB ports (two PD, two QC3.0), a digital voltmeter display, and two included fuses.
Émbaran Kasalametan
- Pastikeun input voltage is within the specified range of 12V-24V DC.
- Always connect the charger with the correct polarity (red wire to positive, black wire to negative).
- Use the included 10A fuse to prevent overcurrent, overload, and short circuits.
- Ulah ngalaan alat ka suhu ekstrim atawa sinar panonpoé langsung pikeun période berkepanjangan.
- Jauhkeun tina jangkauan barudak.
Eusi pakét
- 1 x Qidoe 66W 12V USB Outlet
- 2 x 10A Fuses (one pre-installed, one spare)
- 1 x 1.5M/59.06inch Extended Cable with terminals
- Nut Nut
Image: Contents of the Qidoe 66W 12V USB Outlet package, including the charger, wiring, and fuses.
Setup sareng Instalasi
Follow these steps for proper installation of your Qidoe 66W 12V USB Outlet:
- Drill a Hole: Choose a suitable location for installation. Drill a hole with a 3cm (1.18 inch) diameter. Ensure there is enough space behind the mounting surface for the charger's body and wiring.
- Selapkeun sareng Amankeun: Insert the USB outlet into the drilled hole. Secure it tightly using the provided mounting nut on the backside.
- Sambungkeun Wiring: Connect the red wire (positive) to your vehicle's positive battery terminal or an appropriate fused 12V/24V power source. Connect the black wire (negative) to the vehicle's negative battery terminal or a suitable ground point. Ensure the 10A fuse is properly installed in the red wire's fuse holder.
- Pariksa Pamasangan: Once wired, the voltmeter display should illuminate, indicating successful installation.
Image: Step-by-step visual guide for installing the USB outlet, including drilling, securing, and wiring connections.
Image: Technical dimensions of the charger and details of the 1.5-meter extended cable with a 10A fuse.
Parentah Operasi
Alat ngecas
The Qidoe 66W 12V USB Outlet features two PD (Power Delivery) ports and two QC3.0 (Quick Charge 3.0) ports for efficient charging:
- 30W PD Port: Capable of charging compatible Android and iPhone devices up to 65% in approximately 30 minutes.
- 18W QC3.0 Port: Can charge devices from 0% to 60% in about 35 minutes.
- Ngeusi batre sakaligus: All four ports can be used simultaneously, sharing a total power output of up to 66W without compromising charging speed for individual devices.
Image: Visual representation of the fast charging capabilities of the PD 30W and QC3.0 ports.
Image: An iPhone connected to the charger, demonstrating its fast charging for compatible devices.
Image: The charger in use, powering multiple devices at once.
Voltmeter Display
The built-in digital voltmeter provides real-time monitoring of your vehicle's battery voltage. This helps you keep track of your battery's health and prevent unexpected power issues.
Image: The voltmeter display showing the current battery voltage.
Image: The charger's power on and off states, indicated by the voltmeter display.
Pangropéa
- beberesih: Use a dry, soft cloth to clean the surface of the charger. Do not use abrasive cleaners or solvents.
- Pariksa sambungan: Pariksa sambungan kabel sacara berkala pikeun mastikeun éta aman sareng bébas tina korosi.
- Ngagantian sekering: If the charger stops working, check the 10A fuse. Replace it with a new 10A fuse if it is blown.
- Tahan cai sareng lebu: The charger is designed to be water-proof and dust-proof, offering durability in various environments. However, avoid prolonged submersion or exposure to high-pressure water jets.
Image: The charger demonstrating its water and dust resistance features.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Charger not powering on / No voltmeter display | Incorrect wiring, blown fuse, insufficient power supply. | Check wiring polarity. Replace the 10A fuse. Ensure battery voltage aya dina 12V-24V. |
| Ngecas lambat atanapi henteu ngecas | Incompatible cable, device not supporting fast charge, device fully charged, or multiple high-power devices connected. | Use a high-quality, compatible charging cable. Verify device supports PD/QC3.0. The chip stops charging automatically when fully charged. |
| Voltmeter displays abnormal voltage (e.g., 11.6V or 14.9V) | Batré kendaraan Voltage handap teuing atawa luhur teuing. | This indicates the actual battery voltage. If consistently too low, check your vehicle's battery. If too high, consult a vehicle technician. Normal range is typically 12V-14.5V. |
Gambar: Examples of voltmeter readings and their interpretations.
spésifikasi
- Jumlah modél: QD11-13(YJ-DS2034)
- Masukan Voltage: 12V-24V DC
- Total palabuhan USB: 4 (2 x PD, 2 x QC3.0)
- Total Wattage: 66W Max
- PD Port Output: 30W Max
- QC3.0 Port Output: 18W Max
- Beurat barang: 2.46 ons
- Ukuran produk: 5.3 x 1.3 x 3 inci
- Fitur husus: Fast Charging, Voltmeter Display, Water-proof, Dust-proof
- Alat anu cocog: Smartphones (iPhone 16/15/14/13/12/11/X, Samsung Galaxy S24/S23/S22/S21/S20/S10, Huawei, LG, HTC, ZTE), Tablets (iPad mini/Pro), Cameras, and other USB-powered devices.
Garansi sareng Rojongan
This Qidoe product comes with a 60 poé jaminan duit-balik jeung a 1-taun jaminan ngagantian bébas ti tanggal beuli. Garansi ieu nyertakeun cacad manufaktur sareng masalah anu timbul tina panggunaan normal.
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly through your purchase platform. Please have your order number and product model readily available for faster service.
