Produk Leuwihview
The JOYROOM JR-ZS501 is a versatile vacuum magnetic phone holder designed for secure device mounting in various scenarios, including vehicles and home environments. It features a strong suction cup base, a flexible and adjustable arm, and powerful magnets for reliable phone attachment.
Fitur konci:
- 360° Adjustable & Folding Metal Arms: Allows for multi-angle adjustment and 360° rotation for optimal viewing. The foldable design reduces size for compact storage.
- Ultra-Strong Gel Suction Cup: Features an innovative 3-layer high-strength nano gel suction base for superior adhesion on dashboards, windshields, and other smooth surfaces. It is washable and reusable.
- Powerful Magnetic Hold: Equipped with 24 high-performance N55 magnets, providing 260% stronger magnetic force than standard magnets for secure device holding.
- Kasaluyuan Universal: Compatible with all smartphones, including iPhone 12 series and later (MagSafe compatible), and Android devices using the provided metal ring.
- Pamakéan Multi-Skenario: Suitable for use in cars, on desks, nightstands, kitchens, or gym lockers.
Setup sareng Instalasi
Follow these steps to properly install your JOYROOM Vacuum Magnetic Phone Holder:
- Nyiapkeun permukaan: Clean the desired mounting surface (dashboard, windshield, etc.) thoroughly with the provided wet and dry wipes to ensure it is free of dust and debris. Allow the surface to dry completely.
- Pasang Suction Cup: Remove the protective film from the suction cup base. Place the suction cup firmly onto the cleaned, flat surface.
- Ngamankeun Gunung: Press down on the suction cup to expel air. While pressing, rotate the bearing on the base towards the "Tight" direction until it is securely locked. This activates the powerful air-pressure valve for maximum suction.
- Gantelkeun Telepon anjeun:
- For MagSafe compatible iPhones (12 series or later) or MagSafe cases, simply align your phone with the magnetic ring on the holder.
- For non-magnetic phones or cases, attach the provided metal ring to the back of your phone or case. Ensure it is centered for optimal magnetic connection. Then, attach your phone to the magnetic holder.
Figure 1: Step-by-step installation of the phone holder on a car dashboard.
Figure 2: Illustration of the ultra-strong 3-layer nano gel suction cup.
Figure 3: Activating the air-pressure valve for enhanced stability.
Video 1: Demonstrates the cleaning of the dashboard surface and the installation process of the phone holder, including pressing and tightening the suction cup.
Parentah Operasi
The JOYROOM JR-ZS501 is designed for flexible and secure phone positioning.
- Nyaluyukeun Viewdina Angle: The holder features a 360° rotatable magnetic head and multi-angle adjustable metal arms. Gently pivot the magnetic head or adjust the arm to achieve your desired viewsudut ing.
- Lipat pikeun Panyimpenan: The metal arms can be folded to reduce the mount's size by 70%, making it compact for storage when not in use.
Figure 4: The holder's 360° adjustable arm for versatile positioning.
Video 2: Illustrates the product's features, including the folding mechanism and strong magnetic hold.
Pangropéa
To maintain optimal performance and extend the life of your phone holder:
- Ngabersihkeun Cangkir Sedot: If the suction power decreases, wash the nano gel suction cup with water and let it air dry. It will regain up to 99% of its original suction power.
- Removing the Holder: To remove the holder, rotate the bearing in the "Open" direction and gently lift the side with the "lock" icon. Avoid forcefully pulling the holder off the surface.
Figure 5: The washable nano suction cup for repeated use.
Pamérésan masalah
- Suction Cup Not Sticking: Ensure the mounting surface is clean, dry, and flat. Textured or porous surfaces may reduce suction effectiveness. Wash the suction cup and reapply.
- Telepon Teu Dicekel Kalayan Aman: Verify that your phone or case is MagSafe compatible. If not, ensure the provided metal ring is correctly attached to your phone or case and is centered for optimal magnetic connection.
- Holder Wobbles: Ensure the suction cup is fully tightened by rotating the bearing to the "Tight" position.
spésifikasi
| Nomer modél | JR-ZS501 |
| Ukuran Paket | 6.34 x 3.31 x 1.57 inci |
| Item Beurat | 5.9 ons |
| Fitur husus | 360° Metal Strut, Super Strong Magnetic Strength, Vacuum Suction Base |
| Tipe Pamasangan | Dasbor |
Kasaluyuan
The JOYROOM JR-ZS501 is compatible with a wide range of devices:
- Alat anu cocog: iPhone 17/17 Pro/17 Pro Max/17 Air, iPhone 16/16 Plus/16 Pro/16 Pro Max, iPhone 15 Pro/15 Pro Max/15 Plus/15, iPhone 14/14 Plus/14 Pro/14 Pro Max, iPhone 13/13 Pro/13 Pro Max/13 mini, iPhone 12 Pro Max/12 Pro/12, Apple iPhone, Samsung Galaxy Ultra, Google Pixel, OnePlus, LG, Motorola, Sony, and more.
- Model telepon anu cocog: All MagSafe cases. For non-MagSafe cases, a metal ring is provided for magnetic compatibility.
Figure 6: Device compatibility and magnetic ring usage.
Naon dina Box
- Holder Telepon Magnét
- Cingcin Logam (pikeun alat/casing non-MagSafe)
- Wet and Dry Wipes (for surface preparation)
Garansi sareng Rojongan
For warranty information or customer support, please refer to the product packaging or contact JOYROOM customer service directly. Details are typically available on the manufacturer's official websitus atawa ngaliwatan pangecér mana produk ieu dibeuli.
