Longer RAY5 Mini 3.5W

Longer RAY5 Mini Laser Engraver (3.5W) Instruction Manual

Your guide to setting up, operating, and maintaining your Longer RAY5 Mini Laser Engraver.

1. Produk Langkungview

The Longer RAY5 Mini is a compact and portable laser engraver and cutter designed for various materials. It features a 3.5W laser module, a 140x130mm engraving area, and multiple connectivity options for ease of use.

Longer RAY5 Mini Laser Engraver, a compact black frame laser machine on a wooden surface.

Figure 1: Longer RAY5 Mini Laser Engraver (3.5W) - Overall View

2. Émbaran Kasalametan

Always prioritize safety when operating the laser engraver. Failure to follow safety guidelines can result in serious injury or damage to the device.

  • Perlindungan panon: Always wear the provided laser protective glasses during operation.
  • Laser Shield: Ensure the laser shield is properly installed to reduce laser exposure.
  • Stopan Darurat: Familiarize yourself with the emergency stop button and its location. Press it immediately in case of any malfunction or hazard.
  • Ventilasi: Operate the device in a well-ventilated area to dissipate fumes and smoke generated during engraving/cutting.
  • Bahan anu gampang kaduruk: Avoid engraving or cutting highly flammable materials without proper precautions.
Four images showing safety features: an emergency stop button, limit switches, an acrylic cover, and protective glasses.

Figure 2: Multiple Safety Protections

3. Setup Guide

3.1 Unboxing sareng Inspeksi Awal

The Longer RAY5 Mini comes pre-assembled for quick setup. Carefully remove all components from the packaging and check for any missing items or damage.

Video 1: LONGER RAY5 Mini Laser Engraver Unboxing. This video demonstrates the unboxing process and initial setup of the laser engraver.

Opened cardboard box containing a pre-assembled laser engraver frame. The device has a black frame with silver components and a green circuit board visible.

Figure 3: Pre-assembled frame and laser engraver components inside the box.

3.2 Connecting the Laser Module

  1. Carefully insert the laser module into its designated slot on the machine.
  2. Secure the laser module using the provided thumb screws.
  3. Connect all necessary cables from the laser module to the main unit, ensuring they are firmly seated.

3.3 Sambungan Daya

  1. Plug the DC power adapter into the machine's power port.
  2. Sambungkeun adaptor kakuatan ka stop kontak listrik nu cocog.
  3. Ensure the emergency stop button is disengaged (turned counter-clockwise) and the rocker switch is in the 'ON' position.

4. Parentah Operasi

4.1 Pamasangan sareng Sambungan Parangkat Lunak

The Longer RAY5 Mini supports various software for design and control, including LaserGRBL (free) and LightBurn (paid). It also offers Wi-Fi and APP connectivity.

  • LaserGRBL: Download and install LaserGRBL from the official website. Ensure the CH340 driver is installed for USB connection.
  • Light Burn: Download and install LightBurn. Import the device configuration file for RAY5 Mini.
  • APP/Wi-Fi: Connect your device to the engraver via Wi-Fi using the dedicated app for mobile control.

Video 2: Ray5 mini Laser GRBL Installation and Usage Guide. This video provides a step-by-step guide on installing and using LaserGRBL software.

Video 3: Ray5 mini LightBurn Installation and Usage Guide. This video demonstrates the installation and usage of LightBurn software.

Video 4: Ray5 mini tutorial by using LaserBurn APP in STA mode. This video guides users through using the LaserBurn app in STA mode.

4.2 Fokuskeun Laser

Accurate focusing is crucial for optimal engraving and cutting results. Use the provided focus block to set the correct distance between the laser module and the material surface.

  1. Place the material to be engraved/cut on the working area.
  2. Position the focus block directly under the laser module.
  3. Loosen the thumb screw on the laser module.
  4. Lower the laser module until its bottom edge gently touches the top of the focus block.
  5. Tighten the thumb screw to secure the laser module in place.
  6. Remove the focus block. The laser is now focused.

4.3 Engraving sarta prosés motong

Once the laser is focused and connected to your chosen software, you can begin your projects.

  • Kasaluyuan bahan: The RAY5 Mini can engrave over 300 types of materials, including wood, leather, metal, and acrylic.
  • Precision: Achieve detailed results with a 0.04mm x 0.04mm ultra-fine laser spot and 0.01mm accuracy.
  • Laju: Engrave at speeds up to 12,000mm/min for efficient project completion.
An infographic showing the Longer RAY5 Mini Laser Engraver's features: light weight, high speed (12,000mm/min), 0.04x0.04mm laser spot size, 130x140mm working area, compatibility with LaserGRBL, LightBurn, LaserBurn, and over 300 engravable materials.

Figure 4: Key Features of the Longer RAY5 Mini

A split image comparing engraving quality: 'Ray5 mini 0.04*0.04 mm' shows finer detail on the left, while 'Others 0.15mm*0.15mm' shows coarser detail on the right.

Figure 5: Comparison of Engraving Precision

Video 5: Ray5 Mini Engraves Wood Panels with Ease & Precision. This short video demonstrates the engraver's ability to create precise designs on wood.

5. Pangropéa

Regular maintenance ensures the longevity and optimal performance of your Longer RAY5 Mini.

  • beberesih: Regularly clean the laser lens and the working area to prevent debris buildup. Use a soft, lint-free cloth and appropriate cleaning solutions.
  • Lubrication: Periodically lubricate the guide rails and moving parts as recommended in the detailed manual to ensure smooth operation.
  • Pamariksaan kabel: Check all cables for wear or damage. Replace any damaged cables immediately.

6. Cara ngungkulan

If you encounter issues with your Longer RAY5 Mini, refer to the following common problems and solutions:

MasalahMungkin Cukang lantarananaSolusi
Laser teu firing atawa kaluaran lemahIncorrect focus, dirty lens, low power setting, loose cable.Re-focus the laser, clean the lens, increase power setting in software, check cable connections.
Mesin teu nyambung ka komputer/aplikasiDriver not installed, incorrect COM port, Wi-Fi issues.Install CH340 driver, select correct COM port, ensure stable Wi-Fi connection.
Kualitas ukiran goréng atanapi henteu konsistenIncorrect speed/power settings, material not flat, loose X/Y axis.Adjust speed and power settings, ensure material is flat and secure, tighten eccentric nuts if axes are loose.
Machine makes unusual noisesLoose components, debris in moving parts.Inspect and tighten all screws, clean guide rails, lubricate moving parts.

7. Spésifikasi

  • Ukuran produk: 11.5 x 11.26 x 6.5 inci
  • Jumlah modél: RAY5 Mini
  • Daya laser: 3.5W
  • Area ukiran: 140 x 130 mm
  • Laju ukiran: Nepi ka 12,000mm/mnt
  • Ukuran Titik Laser: 0.04 mm x 0.04 mm
  • Konektipitas: USB, Wi-Fi, APP
  • Parangkat Lunak anu Dirojong: LaserGRBL, LightBurn
  • Beurat barang: 5.15 pon
  • Pabrikan: LEUWIH

8. Garansi jeung Rojongan

Longer provides comprehensive support for your RAY5 Mini Laser Engraver.

  • Garansi: Please refer to the official Longer websitus atanapi dokuméntasi pameseran anjeun kanggo inpormasi jaminan anu lengkep.
  • Bantosan Téknis: Lifetime technical support is available. Contact Longer customer service for assistance with any issues or questions.
  • Kontak: Pikeun rojongan, buka di Longer Official Store on Amazon or refer to the contact information in your product packaging.