SKMEI Digital Watch Modél 2396 Manual Pamaké

Bubuka

Thank you for choosing the SKMEI Digital Watch Model 2396. This military tactical sports watch is designed for durability and functionality, featuring a robust construction, 50M water resistance, and multiple timekeeping functions. This manual will guide you through the setup, operation, and maintenance of your new watch.

Gambar: Hareupeun view tina SKMEI Digital Watch Modél 2396, showcasing its robust design and blue accents.

Fitur konci

The SKMEI 2396 watch is equipped with several features to enhance your timekeeping experience:

• tampilan: Analog-Digital combination for versatile time reading.
• fungsi: Dual time zones, chronograph stopwatch, alarm, date, week display, and 12/24-hour format.
• Lampu tukang: Lampu tukang LED pikeun pisibilitas dina kondisi cahaya remen.
• Tahan cai: 50 meters (5ATM), suitable for swimming and handwashing.
• Daya tahan: Shock-resistant ABS+TPU case and scratch-resistant resin crystal.
• Bahan Tali: Comfortable and durable Thermoplastic Polyurethane (TPU) strap.

Image: A banner illustrating the watch's function overview, including 2 Time, Stopwatch, Week, Alarm, Date, LED Light, WR 50M, and 12/24 Hour display.

Disetél

Aktipkeun Awal

Upon receiving your watch, ensure any protective films are removed from the watch face and back. The watch may already be running. If not, it might require a battery check or activation.

Image: Illustration showing the removal of the protective film from the watch face and the location of the Light, Start/Stop, Mode, and Reset buttons.

Tombol Fungsi Leuwihview

• Tombol Lampu: Aktipkeun lampu tukang LED.
• Tombol Start / Stop: Used for starting and stopping the chronograph, and for adjusting settings.
• Tombol Mode: Cycles through different watch modes (Time, Alarm, Chronograph, Dual Time).
• Tombol Reset: Resets the chronograph, and used for confirming settings.

Parentah Operasi

Nyetel waktos sareng kaping

1. Tina tampilan waktos normal, pencét tombol Tombol Mode repeatedly until the time setting mode is reached (usually indicated by flashing digits).
2. Ngagunakeun éta Mimitian / Tombol eureun to adjust the flashing digit (hours, minutes, seconds).
3. Pencét éta Tombol Reset to move to the next setting item (e.g., from hours to minutes, then to date, month, year).
4. Sakali sadaya setelan leres, pencét tombol Tombol Mode pikeun kaluar tina modeu setelan tur mulang ka tampilan waktu normal.
5. To switch between 12-hour and 24-hour format, while in time setting mode, adjust the hour until the desired format appears.

Ngagunakeun Fungsi Alarm

1. Pencét éta Tombol Mode to cycle to the Alarm mode.
2. Pencét jeung tahan tombol Tombol Reset until the alarm time digits begin to flash.
3. Ngagunakeun éta Mimitian / Tombol eureun pikeun nyaluyukeun jam.
4. Pencét éta Tombol Reset to move to the minutes setting, then use the Mimitian / Tombol eureun pikeun nyaluyukeun.
5. Pencét éta Tombol Mode pikeun mastikeun tur kaluar tina setelan alarm.
6. Pikeun ngahurungkeun alarm ON/OFF, dina modeu Alarm, pencét tombol Mimitian / Tombol eureun. Ikon alarem bakal muncul / ngaleungit.

Ngagunakeun Chronograph (Stopwatch)

1. Pencét éta Tombol Mode to cycle to the Chronograph mode (usually indicated by "ST" or "STOPW").
2. Pencét éta Mimitian / Tombol eureun pikeun ngamimitian stopwatch.
3. Pencét éta Mimitian / Tombol eureun deui pikeun ngareureuhkeun stopwatch.
4. Pikeun neruskeun, pencét tombol Mimitian / Tombol eureun.
5. Pikeun ngareset stopwatch ka nol, pastikeun stopwatch geus dipareuman heula, teras pencét tombol Tombol Reset.

Activating the LED Backlight

Pencét éta Tombol Lampu (top left) to illuminate the digital display for a few seconds.

Setting Dual Time Zone

The watch supports a dual time zone feature.

1. Pencét éta Tombol Mode to cycle to the Dual Time mode (often labeled "T2" or similar).
2. Pencét jeung tahan tombol Tombol Reset until the digits begin to flash.
3. Ngagunakeun éta Mimitian / Tombol eureun pikeun nyaluyukeun jam.
4. Pencét éta Tombol Reset to move to the minutes setting, then use the Mimitian / Tombol eureun pikeun nyaluyukeun.
5. Pencét éta Tombol Mode to confirm and exit the dual time setting.

Pangropéa

Tahan Cai (50M / 5ATM)

Your SKMEI 2396 watch is water-resistant up to 50 meters (5 ATM). This means it is suitable for daily use, handwashing, rain, and short periods of swimming.

• Entong pencét sagala tombol bari arloji ieu submerged dina cai.
• Entong use the watch in hot water, saunas, or steam rooms, as this can compromise the seals.
• Avoid prolonged exposure to water pressure or high-velocity water streams.

Image: The SKMEI 2396 watch shown with water splashes, indicating its water resistance for activities like rain, sweat, or splashes.

Ngabersihan Arloji Anjeun

Pikeun ngabersihan arloji anjeun, usap sacara lembut kalayan lembut, damp cloth. Avoid using harsh chemicals or abrasive materials, which can damage the case or strap.

Émbaran batré

The watch uses a CR2025/SR626SW battery. When the display dims or functions become erratic, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure water resistance is maintained.

Image: Close-up of the watch's stainless steel back, displaying the model number "2396" and recommended battery codes "CR2025/SR626SW".

Pamérésan masalah

spésifikasi

Image: Diagram illustrating the watch dimensions, including case height (60mm), strap/lug width (27.2mm), case width (56mm), and case thickness (20mm).

Garansi sareng Rojongan

Your SKMEI Digital Watch Model 2396 comes with a 9-month manufacturer's warranty. This warranty covers manufacturing defects from the date of purchase. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.

For warranty claims or technical support, please contact your retailer or the official SKMEI customer service. Keep your purchase receipt as proof of purchase.

Pabrikan: SKMEI