ZERFUN G8 Rechargeable 4-Channel Wireless Microphone System User Manual

Bubuka

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ZERFUN G8 Rechargeable 4-Channel Wireless Microphone System. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Gambar: Leuwihview of the ZERFUN G8 4-Channel Wireless Microphone System components.

Eusi pakét

Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:

• ZERFUN G8 Receiver Box x 1
• ZERFUN Rechargeable Bodypack x 4
• Headset Microphone x 4
• Lavalier Lapel Microphone x 4
• Anténeu x 2
• Adaptor kakuatan x 1
• 6.35mm to 6.35mm Cable x 1
• 3.5mm to 3.5mm Cable x 1
• Audio Cable (RCA to 3.5mm) x 1
• Buku Panduan x 1

Image: Visual representation of the ZERFUN G8 system's package contents.

Parentah Setup

1. Receiver Placement and Antenna Connection

Place the receiver on a stable surface, away from potential sources of interference such as large metal objects or other wireless devices. Connect the two antennas to the designated ANT ports on the rear of the receiver.

2. Sambungan Daya

Connect the provided power adapter to the DC12V input on the receiver and then plug it into a power outlet.

3. Connecting to Audio Devices

The ZERFUN G8 receiver offers multiple output options for connecting to an amplifier, audio mixer, or speaker system.

Using XLR Outputs (Balanced)

For professional audio setups, use the balanced XLR outputs. Each channel (1-4) has its own XLR output. Connect an XLR cable (not included) from the receiver's XLR output to the corresponding input on your audio mixer or amppangagung.

Image: Connection diagram for XLR outputs to an audio mixer and speaker.

Using Mixed 1/4-Inch or 1/8-Inch Outputs

For simpler setups, use the mixed 1/4-inch or 1/8-inch outputs. These outputs combine all four microphone channels into a single stereo or mono signal. Connect the appropriate cable (6.35mm to 6.35mm or 3.5mm to 3.5mm/RCA) from the receiver's "MIC OUT" port to the "MIC" input on your amppanyatur atawa spiker.

Image: Connection options for the receiver to an amppanyatur atawa spiker.

Image: Connection diagram for mixed outputs to a TV or speaker.

4. Persiapan Mikropon

Attach either a headset microphone or a lavalier lapel microphone to each bodypack transmitter. Ensure the connection is secure.

Image: Headset and lavalier microphone connection to the bodypack.

Parentah Operasi

1. Powering Dina Sistim nu

1. Optimum Boot Order: Turn on your Audio Mixer, then Audio Amplifier, then Speaker, then Receiver, and finally the Microphones.
2. Pencét tombol daya dina panarima pikeun ngahurungkeun deui.
3. Press and hold the power button on each bodypack transmitter to turn them on. The LED display on the bodypack will illuminate.

2. Automatic Frequency Synchronization

The ZERFUN G8 system features automatic frequency scanning and automatic transmitter setup for easy synchronization. Once the receiver and bodypacks are powered on, they should automatically pair. If pairing does not occur, refer to the "Channel Adjustment" section below.

Image: Illustration of the system's 200 ft UHF wireless range and frequency capabilities.

3. Bodypack Transmitter Controls

Gambar: Hareupeun view of the bodypack transmitter with labeled controls.

• Témbong LED: Shows the current channel (CHA) and battery status.
• Tombol Daya: Press and hold to turn on/off. Short press to mute/unmute.
• SET Button (Channel Adjust): Used to manually change the operating frequency if interference occurs. Press SET, then use VOL+/- to select a new frequency, then press SET again to confirm.
• VOL+/- Buttons: Adjust the input volume level of the microphone.
• Panyambung Mic: Connects headset or lavalier microphones.
• Port ngecas USB-C: Pikeun ngecas batré internal.
• Klip tukang: For attaching the bodypack to clothing.

4. Receiver Controls

Image: Front and rear panels of the receiver with labeled controls and ports.

• Individual Volume Controls (VOL-A, VOL-B, VOL-C, VOL-D): Adjust the output volume for each of the four microphone channels independently.
• Tombol Daya: Ngahurungkeun atanapi mareuman panarima.
• Input DC12V: Pikeun nyambungkeun adaptor kakuatan.
• ANT Ports: For connecting the antennas.
• Balanced XLR Outputs (1-4): Individual balanced audio outputs for each microphone channel.
• MIC OUT (1/4-Inch & 1/8-Inch): Mixed audio outputs combining all channels.

5. Powering Off the System

Optimum Shutdown Order: Turn off the Microphones, then Receiver, then Speaker, then Audio Amplifier, and finally Audio Mixer.

Pangropéa

1. beberesih

Wipe the receiver and bodypacks with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.

2. Ngecas Batré

Each bodypack transmitter contains a built-in rechargeable battery. When the battery indicator on the LED display is low, connect the bodypack to a USB power source using a USB-C cable (not included for charging, but the system comes with audio cables). A full charge provides approximately 7+ hours of working time.

Gambar: Sisi view of the bodypack transmitter showing the USB-C charging port.

3. Panyimpenan

When not in use for extended periods, store the system in a cool, dry place. Ensure bodypack batteries are partially charged (around 50%) before long-term storage to preserve battery health.

Pamérésan masalah

If you encounter issues with your ZERFUN G8 system, please refer to the following common solutions:

• Taya Kaluaran Sora:
  • Ensure all components (receiver, bodypacks, amplifier, speakers) are powered on.
  • Check all cable connections between the receiver and your audio system.
  • Verify that the volume controls on the receiver and bodypacks are not set to minimum or muted.
  • Confirm that the audio system's input is correctly selected.
• Interference or Dropouts:
  • Ensure the receiver and bodypacks are within the 200-foot operating range.
  • Check for other wireless devices operating on similar frequencies nearby.
  • Try changing the frequency channel on the affected bodypack transmitter using the SET and VOL+/- buttons. The system supports 50 compatible frequencies per channel.
  • Ensure antennas on the receiver are properly connected and positioned for optimal reception.
• Mikropon Teu Nyapasangkeun:
  • Ensure both the receiver and the specific bodypack are powered on.
  • Perform a manual frequency scan and synchronization as described in the "Operating Instructions" under "Channel Adjustment".
  • Check bodypack battery level.
• Kahirupan batré pondok:
  • Ensure bodypacks are fully charged before use.
  • Battery performance may degrade over time with repeated charging cycles.

spésifikasi

Garansi sareng Rojongan

ZERFUN products come with a 12-month Manufacturer Assurance. For any product-related inquiries or support, please contact ZERFUN Customer Service. They offer 24-Hours After-Sales Customer Service.

For further assistance, please refer to the contact information provided with your purchase or visit the official ZERFUN websitus.