Buku Panduan Pangguna Generator Sinyal 2-Kanal 60 MHz JOY-IT JT-JDS2960

1. Bubuka

The JOY-IT JT-JDS2960 is a highly versatile 2-channel signal generator designed for a wide range of measurement technology applications. It is capable of generating signals up to 60 MHz and supports various waveforms including sine, square, triangle, pulse, and half-wave. Its compact design, robust aluminum casing, and 2.4-inch color TFT display ensure optimal ease of use and portability, making it an indispensable tool for professionals and hobbyists alike.

2. Parentah Kasalametan

Please read and understand these safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

• Sumber Daya: Use only the provided power adapter or a compatible 5V DC power source. Ensure the power source meets the device's specifications.
• Lingkungan: Operate the device in a dry, well-ventilated area. Avoid exposure to moisture, extreme temperatures, or direct sunlight.
• Penanganan: Do not drop or subject the device to strong impacts. The robust aluminum casing provides protection, but excessive force can cause damage.
• Pangropéa: Ulah nyobian muka atawa ngalereskeun alat sorangan. Rujuk sadayana jasa ka tanaga anu mumpuni.
• Sambungan: Ensure all cables are securely connected before powering on the device. Avoid short circuits.

3. Eusi Paket

Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:

• JOY-IT JT-JDS2960 Mobile Signal Generator
• BNC-BNC Cable
• 2x BNC to Alligator Clip Cables
• USB DC Power Cable
• Kabel Data USB
• Sasayogian tanaga

Gambar 3.1: The JOY-IT JT-JDS2960 Signal Generator with all included accessories, including cables and power supply.

4. Produk Langkungview

Familiarize yourself with the components and controls of your JT-JDS2960 Signal Generator.

Gambar 4.0: Overall angled view of the JOY-IT JT-JDS2960 Signal Generator, highlighting its compact design and display.

4.1. Panel Hareup

Gambar 4.1: Pahareup-hareup view of the front panel, showing the display, rotary encoder, and control buttons.

• tampilan: 2.4-inch Color TFT LCD for waveform visualization and parameter settings.
• Encoder Rotary: Dianggo pikeun navigasi ménu sareng nyaluyukeun nilai parameter.
• Tombol kontrol:
  • OKÉ: Konfirmasi pilihan atawa asupkeun sub-menu.
  • MOD: Selects modulation types.
  • GELOMBANG: Selects waveform types (Sine, Square, Triangle, etc.).
  • MEAS: Accesses the frequency counter function.
  • SYS: Ngalebetkeun setélan sistem.
  • FREQ: Adjusts frequency.
  • AMPL: Saluyukeun amplituit.
  • OFFS: Adjusts DC offset.
  • TUGAS: Adjusts duty cycle (for square/pulse waves).
  • PHAS: Adjusts phase.
  • Tombol CH1/CH2: Enable/disable output for Channel 1 and Channel 2.

4.2. Side and Rear Panels

Gambar 4.2: Left side panel showing the DC 5V power input, USB port, and power switch.

Gambar 4.3: Rear panel showing the BNC output connectors for CH1, CH2, TTL_IN, and EXT.IN.

• Input DC 5V: Input daya pikeun alat éta.
• Port USB: For data connection to a computer.
• Hurungkeun ON / OFF: Ngahurungkeun atanapi mareuman alat.
• CH1 Output: BNC connector for Channel 1 signal output.
• CH2 Output: BNC connector for Channel 2 signal output.
• TTL_IN: TTL input.
• EXT.IN: Input éksternal.

5. Setélan

Follow these steps to set up your signal generator for first use.

1. Sambungkeun Kakuatan: Connect the provided USB DC power cable to the DC 5V input on the left side panel of the device. Plug the other end into the power supply, and then into a suitable wall outlet.
2. Daya Hurung: Flip the ON/OFF switch on the left side panel to the 'ON' position. The display should illuminate.
3. Kaluaran Sambungkeun: Use the BNC-BNC cable or BNC to alligator clip cables to connect the CH1 or CH2 output to your desired test circuit or measurement device.
4. (Opsional) Sambungan USB: If you plan to control the device via a computer, connect the USB data cable from the device's USB port to your computer. Install any necessary drivers or software as per the manufacturer's websitus (www.joy-it.net).

6. Parentah Operasi

This section details how to generate and control various waveforms using your JT-JDS2960.

6.1. Operasi dasar

1. Pilih Saluran: The display shows settings for CH1 and CH2. Use the navigation buttons or rotary encoder to highlight the channel you wish to configure.
2. Aktipkeun Kaluaran: Press the corresponding CH1 or CH2 button (yellow or blue) on the front panel to enable the output for that channel. The 'ON' indicator on the display will light up.
3. Select Waveform: Pencét éta GELOMBANG button. Use the rotary encoder to scroll through available waveforms (Sine, Square, Triangle, Pulse, Sawtooth, etc.) and press OK pikeun milih.
4. Saluyukeun Parameter: Use the dedicated buttons (FREQ, AMPL, Pareum, TUGAS, PHAS) to select the parameter you wish to adjust. Use the rotary encoder to change the value and OK pikeun mastikeun.

6.2. Fungsi Maju

• Counter Frékuénsi: Pencét éta MEAS button to enter the frequency counter mode. Connect the signal you wish to measure to the appropriate input (e.g., TTL_IN or EXT.IN).
• Modulasi: Pencét éta MOD button to access modulation settings. The JT-JDS2960 supports various modulation types.
• Fungsi Sapuan: This function allows the frequency to automatically sweep within a defined range. Refer to the on-screen menu after selecting the sweep option.
• Burst Function: Generates a specific number of waveform cycles.
• Custom Waveforms: The device supports up to 60 custom waveforms. Consult the detailed software manual (available on www.joy-it.net) for instructions on creating and loading custom waveforms via USB.

7. Spésifikasi

Technical specifications for the JOY-IT JT-JDS2960 Signal Generator.

8. Pangropéa

Proper care and maintenance will ensure the longevity and optimal performance of your signal generator.

• beberesih: Anggo kaén anu garing sareng lemes pikeun ngabersihan bagian luar alat. Ulah make cleaners abrasive atawa pangleyur.
• Panyimpenan: When not in use, store the device in a cool, dry place, away from direct sunlight and dust.
• Pamariksaan: Pariksa kabel sareng konektor sacara berkala pikeun tanda-tanda karusakan atanapi karusakan. Ganti komponén anu ruksak langsung.

9. Cara ngungkulan

If you encounter issues with your JT-JDS2960, refer to the following common problems and solutions.

• Alat teu hurung:
  • Ensure the power cable is securely connected to both the device and the power outlet.
  • Pastikeun saklar daya aya dina posisi 'ON'.
  • Pariksa naha adaptor kakuatan berpungsi leres.
• Henteu aya sinyal kaluaran:
  • Ensure the desired channel (CH1 or CH2) is enabled by pressing its respective button. The 'ON' indicator on the display should be active.
  • Check the output cable connections to your test circuit.
  • Pariksa yén amplitude teu disetel ka 0V.
• Frékuénsi anu salah/amplitude readings:
  • Ensure the correct parameters are selected and adjusted using the rotary encoder.
  • Check the connections to your measurement device.
  • Perform a factory reset if issues persist (refer to system settings).

10. Garansi jeung Rojongan

For warranty information, technical support, or to download the latest software and detailed manuals, please visit the official JOY-IT websitus.

Resmi Websitus: www.joy-it.net

Please have your model number (JT-JDS2960) and purchase details ready when contacting support.