Bubuka
This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your TRU COMPONENTS TC-Q400-T Industrial Wireless Remote Control. This device is designed to control motors, vehicles, or machines across four distinct channels, offering a reliable operating range of over 100 meters. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.
Produk Leuwihview
Gambar: The TRU COMPONENTS TC-Q400-T Industrial Wireless Remote Control. It features an orange casing with a black top panel. Key elements visible include a red rotary switch, a green 'START' button, a 'STATUS' indicator light, four channel indicator lights (D, C, B, A), and four large black control buttons with white directional arrows (up, down, left, right). A yellow wrist strap is attached to the bottom of the device.
The TC-Q400-T is a robust industrial-grade wireless remote control, specifically designed as a transmitter unit. It features a durable housing, intuitive controls, and a secure wrist strap for ease of use in various industrial environments. The device operates on a frequency range of 433.88 - 433.95 MHz, ensuring stable communication over long distances.
Disetél
- Pamasangan batré: Locate the battery compartment on the rear of the remote control. Open the compartment cover and insert the required batteries, ensuring correct polarity (+/-). Close the cover securely. (Specific battery type not provided, assume standard industrial batteries)
- Daya mimiti Hurung: Turn the red rotary switch to the 'ON' position. The 'STATUS' indicator light should illuminate, indicating the device is powered on.
- Papasangan (upami diperlukeun): While this transmitter is typically pre-paired with its corresponding receiver, if pairing is necessary, refer to the receiver's manual for specific pairing instructions. Ensure both devices are within range during the pairing process.
- Pasang Tali Pigeulang: Secure the yellow wrist strap to the designated attachment point at the bottom of the remote control to prevent accidental drops.
Parentah Operasi
The TC-Q400-T remote control features a simple and effective layout for controlling connected machinery.
- Hurungkeun/Pareuman: Use the red rotary switch to power the unit ON or OFF.
- Tombol START: Press the green 'START' button to initiate the operation of the connected machine or system.
- Indikator STATUS: The central 'STATUS' light provides feedback on the remote's operational state (e.g., power on, signal transmission, low battery). Refer to the receiver's manual for specific status light interpretations.
- Channel Indicators (A, B, C, D): These lights indicate which of the four channels are currently active or selected.
- Tombol kontrol: The four large black buttons with directional arrows (up, down, left, right) are used to send commands to the connected machinery. Each button corresponds to a specific function or movement depending on the configured receiver. This model supports 4 buttons with 1 speed control.
- Rentang Operasi: Maintain the remote control within 100 meters of the receiver for optimal performance. Environmental factors may affect the actual range.
Pangropéa
- beberesih: Clean the remote control regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used. Do not use abrasive cleaners, solvents, or immerse the device in water.
- Ngagantian batré: Replace batteries promptly when the 'STATUS' indicator shows a low battery warning or when the remote's performance degrades. Always use the recommended battery type.
- Panyimpenan: Store the remote control in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If storing for extended periods, remove the batteries to prevent leakage.
- Pamariksaan: Periodically inspect the casing, buttons, and wrist strap for any signs of damage or wear. Do not use the device if it appears damaged.
Pamérésan masalah
- Jauh Teu Ngabales:
- Ensure the red rotary switch is in the 'ON' position.
- Pariksa tingkat batré jeung ngaganti lamun perlu.
- Verify the remote is within the operating range of the receiver (within 100m).
- Confirm the receiver is powered on and functioning correctly.
- Jarak Operasi Pendek:
- Ganti batré ku anu anyar.
- Ensure there are no significant obstructions (e.g., thick walls, metal structures) between the transmitter and receiver.
- Check for sources of strong electromagnetic interference in the vicinity.
- Indicator Lights Not Functioning:
- Pariksa tingkat batré.
- Upami masalahna teras-terasan saatos ngaganti batré, hubungi dukungan palanggan.
spésifikasi
- Jumlah modél: TC-12835196
- merek: KOMPONEN TRU
- Saluran: 4-channel (transmitter only)
- Tombol kontrol: 4 buttons, 1 speed
- Rentang Frékuénsi: 433.88 - 433.95 MHz
- Rentang Operasi: ≥ 100 méter
- Negara asal: Cina
- Sadia munggaran: Pébruari 28, 2025
- Availability of Spare Parts (EU): 1 Taun
Garansi sareng Rojongan
TRU COMPONENTS provides a warranty for a period of at least 2 taun from the date of purchase for this product. This warranty covers defects in materials and workmanship under normal use.
For technical support, warranty claims, or inquiries regarding spare parts, please contact your retailer or the TRU COMPONENTS customer service. Please have your model number (TC-12835196) and proof of purchase ready when contacting support.
For more information, you may visit the official TRU COMPONENTS websitus atanapi tingal wincik kontak disadiakeun kalawan dokuméntasi pameseran Anjeun.
