Invacare Essential SX3 Manual Wheelchair User Manual

Bubuka

This manual provides essential instructions for the safe and effective use, assembly, maintenance, and troubleshooting of your Invacare Essential SX3 Manual Wheelchair. Please read this manual thoroughly before using the wheelchair to ensure proper operation and to prevent injury.

Produk Leuwihview

The Invacare Essential SX3 Manual Wheelchair is designed for adults requiring mobility assistance. It features a lightweight, foldable frame, comfortable padded armrests, and adjustable footrests for enhanced user experience.

Gambar 1: Invacare Essential SX3 Manual Wheelchair, front-side view.

Fitur konci:

• Flip-Back Desk Length Armrests: Padded armrests designed for easy access to desks and tables, and for simplified transfers.
• Desain Ringan sareng Lipat: Weighs approximately 38 lbs and folds to 12.3 inches wide for transport and storage.
• Adjustable Seat Depth: Standard 16-inch depth, extendable by 2 inches with an included kit.
• Durable Vinyl Upholstery: Easy to clean and resistant to wear.
• Swing-Away and Adjustable Footrests: Removable and height-adjustable for user comfort and easier transfers.
• Roda Anu Muter Lemes: 8-inch PVC front wheels and 24-inch rear mag PU tires with built-in wheel locks.

Komponén

Familiarize yourself with the main components of your wheelchair:

• Pigura: Powder-coated steel frame.
• Korsi sareng Sandaran: Vinyl upholstery.
• Sandaran leungeun: Padded, flip-back, desk-length.
• Footrests/Legrests: Swing-away, height-adjustable.
• Casters hareup: 8-inch PVC wheels.
• Rear Rear: 24-inch mag PU tires with push-rims.
• Konci Roda: For securing the wheelchair.
• Gagang Dorong: For attendant propulsion.

Gambar 2: Hareupeun view of the wheelchair, showing footrests and front casters.

Setup sareng Majelis

The Invacare Essential SX3 Wheelchair arrives fully assembled. Follow these steps for initial preparation:

1. Ngabongkar Kursi Roda:
   • Tempatkeun korsi roda anu dilipet dina tempat anu datar sareng stabil.
   • Grasp the push handles and gently pull them apart until the wheelchair frame begins to open.
   • Push down firmly on both sides of the seat rails until the seat is fully flat and locked into position. Ensure there is an audible click.
2. Attaching/Adjusting Footrests:
   • Align the footrest hangers with the receiver brackets on the front of the wheelchair frame.
   • Swing the footrests inward until they lock into place.
   • To adjust the height, press the release button on the legrest tube and slide the footplate up or down to the desired position. Release the button to lock.
   • To remove, swing the footrests outward and lift them off the receiver brackets.
3. Adjusting Seat Depth (Optional):
   • The wheelchair includes a kit to extend the seat depth by 2 inches. Refer to the separate instructions provided with the extension kit for detailed installation.
4. Inspecting Wheelchair: Before first use, ensure all components are securely attached, wheels roll freely, and wheel locks engage properly.

Gambar 3: Flip-back armrests allow seamless access to desks and tables.

Parentah Operasi

Propulsi Mandiri:

• Grasp the push-rims on the rear wheels.
• Push forward on the rims to move forward, and pull back to slow down or reverse.
• To turn, apply more force to one push-rim than the other.

Propulsi Pendamping:

• An attendant can push the wheelchair using the ergonomic non-slip hand grips on the back of the chair.
• Use the integrated steel step tube to assist in lifting the front casters over small obstacles like curbs or bumps.

Gambar 4: Attendant pushing the wheelchair, demonstrating the use of the integrated step tube.

Engaging Wheel Locks:

• Always engage both wheel locks when transferring in or out of the wheelchair, or when stationary.
• Push the lever on each wheel lock forward until it clicks into place, securing the rear wheels.
• To disengage, pull the lever back.

Gambar 5: Close-up of the secure locking wheel mechanism.

Lipat Korsi Roda:

• Ensure footrests are swung away or removed.
• Grasp the center of the seat upholstery and lift upwards. The frame will begin to collapse inward.
• Continue lifting until the wheelchair is fully folded.

Gambar 6: The wheelchair folds compactly for storage and transport.

Pangropéa

beberesih:

• Wipe down the vinyl upholstery and frame with a damp lawon jeung sabun hampang.
• Hindarkeun pembersih abrasive atanapi pangleyur anu tiasa ngaruksak finish.
• Tegalan tuntas sanggeus beberesih.

Pamariksaan:

• Regularly check all nuts, bolts, and fasteners for tightness.
• Inspect tires for wear and proper inflation (if applicable for rear tires).
• Ensure wheel locks engage and disengage smoothly and securely.
• Check armrests and footrests for secure attachment and proper function.

Pamérésan masalah

spésifikasi

• Jumlah modél: ISX366DASA
• Diménsi Produk (Kabuka): 31.88 x 24.25 x 34 inci
• beurat: 38 pon
• Jembar Korsi: 16 inci
• Jero korsi: 16 inches (extendable to 18 inches)
• Roda hareup: 8-inch PVC
• Rear Rear: 24-inch Mag PU tires
• Pabrikan: Invacare

Gambar 7: Key dimensions and maximum weight capacity of the wheelchair.

Émbaran Kasalametan

• Always engage wheel locks before transferring in or out of the wheelchair.
• Do not attempt to operate the wheelchair on steep inclines or declines without assistance.
• Pastikeun yén sadaya bagian dipasang sacara aman sateuacan unggal dianggo.
• Ulah ngaleuwihan kapasitas beurat maksimum 265 lbs.
• Avoid sudden movements or changes in direction that could cause instability.
• Regularly inspect the wheelchair for any signs of wear or damage. Do not use if damaged.

Garansi sareng Rojongan

For warranty information and customer support, please contact Invacare directly. Refer to the product packaging or the official Invacare websitus wéb pikeun syarat garansi khusus sareng detail kontak.

Pabrikan: Invacare

Kabijakan pamulangan: 30-day return policy (as per Amazon listing at time of purchase).