1. Bubuka
This manual provides comprehensive instructions for the installation, operation, and maintenance of your DS18 Car Audio Bundle. This bundle includes two DS18 PRO-X6.4BM 6.5-inch midrange loudspeakers and two DS18 G4.6Xi 4x6-inch coaxial speakers. Please read this manual thoroughly before installation and use to ensure proper function, optimal performance, and safety.
The DS18 Car Audio Bundle is designed to enhance your vehicle's sound system by delivering crisp midrange frequencies and dynamic full-range audio. Proper installation and care will ensure long-lasting audio clarity and performance.
2. Émbaran Kasalametan
- Pamasangan profésional disarankeun: Due to the complexity of car audio systems and electrical wiring, professional installation by a qualified technician is highly recommended.
- Pegatkeun sambungan batré: Always disconnect the vehicle's negative battery terminal before beginning any electrical installation to prevent short circuits and electrical damage.
- Perlindungan dédéngéan: Paparan volume anu luhur dina jangka waktu anu lila tiasa nyababkeun karusakan dédéngéan permanén. Ati-ati nalika nyaluyukeun volume.
- Pamasangan Aman: Ensure all speakers are securely mounted to prevent them from becoming projectiles in the event of a sudden stop or accident.
- Wiring anu leres: Use appropriate gauge wiring and ensure all connections are secure and insulated to prevent electrical shorts and fire hazards.
- Hindarkeun Uap: Do not expose speakers to excessive moisture or water. These speakers are not waterproof.
3. Eusi Paket
Pastikeun yén sadaya item aya dina pakét anjeun:
- 2 x DS18 PRO-X6.4BM 6.5-inch Midrange Loudspeakers
- 2 x DS18 G4.6Xi 4x6-inch Coaxial Speakers
- Mounting Hardware (screws, clips, gaskets)
- Manual pamaké

Gambar 1: Leuwihview of the DS18 Car Audio Bundle, including two 6.5-inch midrange speakers and two 4x6-inch coaxial speakers.
4. Spésifikasi
Detailed specifications for the DS18 Car Audio Bundle components:
| Fitur | PRO-X6.4BM (6.5" Midrange) | G4.6Xi (4x6" Coaxial) |
|---|---|---|
| Tipe Speaker | Midrange Loudspeaker | Speaker Coaxial |
| Ukuran Speaker | 6.5 inci | UKURAN 4 X 6 CM |
| RMS Power nanganan | 250 Watt | 45 Watt |
| Penanganan Daya Max | 500 Watt | 135 Watt |
| Impedansi | 4 ohm | 4 ohm |
| Bahan | Metal (Basket), CCAW Voice Coil | Metal (Basket), Mylar Dome Tweeter |
| Tipe Pamasangan | siram Gunung | siram Gunung |
| Dianjurkeun Mangpaat | Sistem Audio Mobil | Sistem Audio Mobil |

Image 2: DS18 PRO-X6.4BM 6.5-inch Midrange Loudspeaker with key specifications.

Image 3: DS18 G4.6Xi 4x6-inch Coaxial Speaker with key specifications.
5. Setup jeung Instalasi
Proper installation is crucial for optimal performance and safety. If you are unsure about any step, consult a professional car audio installer.
5.1 Léngkah-léngkah Pra-Pamasangan
- Baca Manual: Familiarize yourself with all instructions before starting.
- Alat ngumpulkeun: Ensure you have all necessary tools (screwdrivers, wire strippers, crimpers, drill, safety glasses, etc.).
- Pegatkeun sambungan batré: Pegatkeun sambungan terminal négatip batré kendaraan anjeun.
- Identify Speaker Locations: Determine the best mounting locations for the 6.5-inch midrange speakers and 4x6-inch coaxial speakers in your vehicle. Ensure adequate clearance and depth.
5.2 Pasang Speaker
- Nyiapkeun Permukaan Pemasangan: If replacing existing speakers, remove them. If creating new openings, carefully mark and cut the speaker holes according to the speaker's template (if provided) or dimensions. Ensure no wires or vehicle components are damaged during cutting.
- Test Fit: Before final mounting, test fit the speakers to ensure they sit flush and do not interfere with window mechanisms or other components.
- Speaker Aman: Use the provided mounting hardware (screws) to firmly secure the speakers in place. Do not overtighten, as this can damage the speaker frame.
5.3 Sambungan Wiring
- Identipikasi polaritasna: Sambungkeun terminal positif (+) spiker ka kaluaran positif (+) Anjeun amplifier or head unit. Connect the negative (-) terminal of the speaker to the negative (-) output. Incorrect polarity will result in poor sound quality and reduced bass response.
- Sambungan Aman: Use high-quality speaker wire and ensure all connections are tight and properly insulated (e.g., with heat shrink tubing or electrical tape) to prevent shorts and corrosion.
- Jalur Kawat: Rutekeun kabel speaker jauh tina sisi anu seukeut, bagian anu obah, sareng sumber gangguan listrik anu poténsial.
5.4 Post-Pamasangan
- Sambungkeun deui Batré: Once all speakers are installed and wired, reconnect the negative terminal of your vehicle's battery.
- Tés awal: Turn on your car audio system at a very low volume. Gradually increase the volume and check for sound from all speakers. Listen for any distortion or unusual noises.
- Saluyukeun Setélan: Refer to your head unit or amplifier manual to properly set gain levels, crossover points, and equalization for optimal sound.
6. Parentah Operasi
Once installed, operating your DS18 Car Audio Bundle involves proper system configuration and careful listening practices.
- System Power On: Turn on your car's ignition and then your head unit/stereo.
- Kontrol volume: Always start with the volume at its lowest setting and gradually increase it to a comfortable listening level. Avoid excessively high volumes to prevent speaker damage and hearing loss.
- AmpSetélan Lifier: Upami nganggo éksternal amplifier, ensure its gain settings are properly matched to your head unit's output. Incorrect gain settings can lead to distortion and speaker damage.
- Setélan Crossover: For optimal sound and speaker longevity, use appropriate crossover settings. Midrange speakers typically benefit from a high-pass filter, while coaxial speakers can be run full-range or with a high-pass filter depending on your system. Consult your amplifier or head unit manual for specific crossover adjustments.
- Kasaruaan (EQ): Sesuaikeun unit sirah anjeun atanapi amplifier's equalizer settings to fine-tune the sound to your preference. Avoid extreme EQ settings that can introduce distortion.
7. Pangropéa
Regular maintenance helps ensure the longevity and performance of your speakers.
- beberesih: Use a soft, dry, lint-free cloth to gently wipe down speaker grilles and surrounds. Do not use harsh chemicals, abrasives, or excessive moisture.
- Pariksa sambungan: Periodically check all wiring connections to ensure they remain tight and free from corrosion. Loose connections can lead to intermittent sound or poor performance.
- Perlindungan Lingkungan: While designed for automotive use, avoid exposing speakers to extreme temperatures, direct prolonged sunlight, or excessive moisture.
- Dengekeun Distorsi: If you hear any distortion, immediately reduce the volume and investigate the cause. Continued operation with distortion can damage the speakers.
8. Cara ngungkulan
If you experience issues with your DS18 Car Audio Bundle, refer to the following common troubleshooting steps:
8.1 Teu Aya Sora ti Spiker
- Pariksa kakuatan: Ensure your head unit and amplifier (if used) are powered on.
- Pariksa sambungan: Inspect all speaker wires for proper connection to both the speakers and the amplifier/head unit. Ensure no wires are loose or shorting.
- Pariksa sekering: Examine the fuses on your amplifier and head unit. Replace any blown fuses.
- Setélan Head Unit: Confirm that the audio output is not muted or set to a source that is not playing.
8.2 Sora Anu Distorsi atanapi Teu Jelas
- Tingkat volume: Reduce the volume. If distortion disappears, the system may be overdriven.
- AmpKeuntungan Lifier: Saluyukeun amplifier's gain settings. Too high a gain can cause clipping and distortion.
- Setélan Crossover: Ensure crossover frequencies are set appropriately for each speaker type. Midrange speakers should not be playing very low bass frequencies.
- Setélan ékualiser: Reset your equalizer to flat or make minor adjustments. Extreme EQ settings can introduce distortion.
- Impedansi spiker: Verify that the speakers' impedance (4 Ohms) is compatible with your ampkaluaran liifier urang.
8.3 Weak Bass or Treble
- Polaritasna: Check speaker wiring polarity. Incorrect polarity can cause phase cancellation, leading to weak bass.
- Setélan Crossover: Adjust crossover points to allow appropriate frequencies to reach the speakers.
- Setélan EQ: Anggo unit sirah anjeun atanapi amplifier's equalizer to boost or cut specific frequency ranges.
- Penempatan Speaker: Ensure speakers are not obstructed and are mounted in a way that allows for proper sound dispersion.
9. Émbaran jaminan
DS18 products, including this Car Audio Bundle, come with a limited warranty. The specific terms, conditions, and duration of the warranty may vary. For detailed warranty information, please refer to the warranty card included with your product packaging or visit the official DS18 websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.
10. Rojongan
For technical assistance, troubleshooting guidance beyond this manual, or to inquire about warranty claims, please contact DS18 customer support.
- Dukungan Online: Kunjungi DS18 resmi websitus pikeun FAQs, sumberdaya rojongan, sarta formulir kontak.
- Inpormasi kontak: Refer to the DS18 website or your product packaging for direct customer service contact details (phone, email).
When contacting support, please have your product model number (DS18 Car Audio Bundle, PRO-X6.4BM, G4.6Xi) and purchase details readily available to expedite assistance.





