JONSBO ZB-120B 120mm PC Case Fan Instruction Manual

1. Bubuka

Thank you for choosing the JONSBO ZB-120B 120mm PC Case Fan. This fan is designed to provide efficient cooling for your computer system while offering customizable ARGB lighting effects. Its unique infinity mirror design and integrated wiring simplify installation and enhance the aesthetic appeal of your PC build. Please read this manual thoroughly before installation and use to ensure proper operation and longevity of the product.

2. Émbaran Kasalametan

Mangga perhatikeun pancegahan kaamanan di handap ieu:

• Pastikeun sistem komputer anjeun pareum sareng dicabut tina stop kontak sateuacan dipasang atanapi diropéa.
• Handle the fan and its components with care to avoid damage.
• Do not attempt to modify the fan or its wiring. Unauthorized modifications may void the warranty and pose electrical hazards.
• Jauhkeun kipas tina cairan sareng kalembaban anu kaleuleuwihi.
• This product is intended for use within a computer chassis.

3. Eusi Paket

Pastikeun yén sadaya komponén aya dina bungkusan:

• JONSBO ZB-120B 120mm PC Case Fan (1 unit)
• Pamasangan screws

Image: JONSBO ZB-120B fan with its integrated cables for power and ARGB connection.

4. Fitur Produk

The JONSBO ZB-120B fan offers a blend of performance and aesthetics:

• Axis / 4-Sides Infinity Mirror: Dilengkepan ilusi eunteung sarébu lapisan hareup sareng eunteung tanpa wates zona ganda internal/éksternal pikeun épék cahaya anu lengkep.
• Wiring Saderhana: An integrated joint structure allows for a single-line connection to the motherboard, simplifying cable management.
• Daisy-Chain ARGB: 5V ARGB plug with male and female design enables series connection with other compatible lighting devices.
• Kontrol PWM: 4-Pin PWM connector allows for precise fan speed control based on system temperature, optimizing cooling and noise levels.
• Aliran hawa optimal: Operates at a maximum rotational speed of 2400 RPM for effective heat dissipation.
• Konstruksi awét: Made from high-quality plastic for reliability.

Image: Illustration of the front thousand-layer mirror illusion, showcasing the depth and complexity of the ARGB lighting effect.

Image: Diagram illustrating the simplified wiring design, showing a single cable connection for multiple fans to the motherboard.

5. Setup jeung Instalasi

Follow these steps to install your JONSBO ZB-120B PC Case Fan:

1. Nyiapkeun Sistim anjeun: Power off your computer and unplug it from the power source. Open your PC case to access the fan mounting locations.
2. Pasang kipas: Position the fan in your desired location (e.g., front, top, rear, bottom of the case). Use the included mounting screws to secure the fan to the chassis. Ensure the fan is oriented correctly for desired airflow (intake or exhaust).
3. Nyambungkeun Daya (PWM): Locate a 4-Pin PWM fan header on your motherboard. Connect the fan's 4-Pin PWM cable to this header. This allows the motherboard to control the fan speed.
4. Nyambungkeun Lampu ARGB: Locate a 3-Pin 5V ARGB header on your motherboard. Connect the fan's 3-Pin ARGB cable to this header. If you have multiple JONSBO ZB series fans, you can daisy-chain them using the male and female ARGB connectors, then connect the last fan in the chain to the motherboard header. Ensure you connect to a 5V ARGB header, not a 12V RGB header, to prevent damage.
5. Manajemén Kabel: Route the cables neatly to avoid interference with other components and to improve airflow within the case.
6. Tutup Case sareng Hurungkeun: Once all connections are secure, close your PC case, plug in the power, and power on your system.

Image: Multiple JONSBO ZB-120B fans installed in a computer case, showcasing their ARGB lighting and placement.

Image: Illustration of ARGB lighting synchronization, indicating compatibility with various motherboard RGB software.

6. Parentah Operasi

After successful installation, the fan will operate automatically. Fan speed is controlled via the 4-Pin PWM connection, typically managed by your motherboard's BIOS/UEFI settings or dedicated software. ARGB lighting effects are controlled via the 3-Pin 5V ARGB connection, usually through your motherboard's RGB software (e.g., ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync) or a compatible external ARGB controller.

7. Pangropéa

Regular maintenance helps ensure optimal performance and extends the lifespan of your fan:

• beberesih: Periodically clean the fan blades and frame to remove dust buildup. Use compressed air or a soft, dry cloth. Ensure the system is powered off and unplugged before cleaning.
• Pamariksaan: Check for any loose connections or signs of wear on the cables.

8. Cara ngungkulan

If you encounter issues with your JONSBO ZB-120B fan, consider the following:

• Kipas teu berputar:
  • Check if the 4-Pin PWM cable is securely connected to the motherboard fan header.
  • Pariksa yén header kipas diaktipkeun dina setélan BIOS/UEFI motherboard anjeun.
  • Test the fan on a different fan header or with a fan controller if available.
• Pencahayaan ARGB Teu Gawé:
  • Ensure the 3-Pin 5V ARGB cable is correctly connected to a 5V ARGB header on your motherboard or controller. Ulah disambungkeun ka header RGB 12V.
  • Check your motherboard's RGB software to ensure lighting effects are enabled and configured.
  • If daisy-chaining, ensure all connections between fans are secure.
• Noise kaleuleuwihan:
  • Pastikeun kipas dipasang sacara aman sareng henteu ngageter kana wadahna.
  • Check for any obstructions (e.g., cables) hitting the fan blades.
  • Adjust fan speed settings in your motherboard's BIOS/UEFI or software.

9. Spésifikasi

Image: Comparison table showing noise levels, rotational speeds, and air volume for regular and reverse fan blade designs.

10. Garansi jeung Rojongan

Kanggo inpormasi garansi sareng dukungan téknis, mangga tingal ka Jonsbo resmi websitus atanapi ngahubungan pangecér Anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi.