LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor User Manual

1. Bubuka

Thank you for choosing the LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new LED spotlight. Please read these instructions carefully before installation and retain them for future reference.

2. Émbaran Kasalametan

• Kasalametan listrik: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation, maintenance, or repair.
• Voltage: Produk ieu beroperasi dina tegangan 220 Volt. Pastikeun catu daya anjeun cocog sareng sarat ieu.
• Peunteun IP65: The spotlight is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. It is suitable for outdoor use but should not be submerged in water.
• Panas: Do not cover the spotlight during operation, as this may cause overheating.
• Non-Dimmable: This LED spotlight is non-dimmable. Do not connect it to a dimmer switch.
• Sumber cahaya: Sumber cahaya LED teu tiasa digentos. Upami sumber cahaya rusak, sadaya lampu kedah digentos.

3. Eusi Paket

Mangga parios bungkusan pikeun mastikeun yén sadaya komponén aya:

• LEDVANCE 17W 2400LM LED Spotlight unit
• Kurung ningkatna
• Screws and wall anchors (may vary by region)
• Instruksi Manual

4. Setup jeung Instalasi

Turutan léngkah ieu pikeun instalasi anu leres:

4.1 Pra-Pasang

• Pareum listrik: Pastikeun catu daya utama ka area pamasangan dipareuman dina pemutus sirkuit.
• Pilihan lokasi: Choose a suitable outdoor location for the spotlight. Consider the desired coverage area for the light and the effective range of the motion and light sensors. Ensure the mounting surface is sturdy enough to support the fixture.
• Pariksa Diménsi: Refer to the product dimensions to ensure adequate space for installation.

This diagram illustrates the physical dimensions of the LEDVANCE LED Spotlight. The front view shows a width of 157 mm, and the side view shows a height of 183 mm and a depth of 56.5 mm, providing crucial measurements for installation planning.

4.2 Pamasangan

1. Position the mounting bracket on the desired surface and mark the drilling points.
2. Bor liang dina posisi anu ditandaan sareng pasang jangkar témbok upami diperyogikeun.
3. Ngamankeun bracket ningkatna kana beungeut cai ngagunakeun screws disadiakeun.
4. Attach the LED spotlight unit to the mounting bracket, ensuring it is firmly secured. Adjust the angle of the spotlight as needed.

4.3 Kabel

• Connect the spotlight's electrical wires to your mains power supply (220V). Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations.
• Properly insulate all connections to prevent short circuits and ensure safety.
• Sakali kabel parantos réngsé sareng aman, balikkeun deui daya ka sirkuit.

This image displays the product packaging for the LEDVANCE Floodlight Sensor, highlighting key features such as 17W power, 2400 lumens, IP65 rating, 5-year guarantee, 4000K color temperature, and motion/light sensor capabilities. It also shows the product's model number and various certifications.

5. Parentah Operasi

The LEDVANCE spotlight is designed for automatic operation based on its integrated motion and light sensors.

• Light Sensor (Dusk-to-Dawn): The integrated light sensor detects ambient light levels. The spotlight will automatically activate when the ambient light falls below a certain threshold (e.g., at dusk) and deactivate when sufficient light is present (e.g., at dawn).
• Sénsor gerak: The motion sensor detects movement within its detection range. When motion is detected, the spotlight will illuminate for a set duration. After the motion ceases and the set time expires, the light will turn off, provided the ambient light level is above the threshold set by the light sensor.
• Penyesuaian: While specific adjustment controls are not detailed, some models may feature adjustable settings for motion sensitivity, light threshold, and illumination duration. Refer to any labels on the fixture itself for potential adjustment dials.

6. Pangropéa

The LEDVANCE spotlight requires minimal maintenance.

• beberesih: Periodically clean the surface of the spotlight and the sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the sensor.
• Pamariksaan: Regularly inspect the fixture for any signs of damage, loose wiring, or corrosion. Address any issues promptly.
• Henteu aya Bagian anu Bisa Dilayanan Pamaké: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the unit yourself.

7. Cara ngungkulan

If you encounter issues with your LEDVANCE spotlight, refer to the following common problems and solutions:

8. Spésifikasi

9. Garansi jeung Rojongan

This LEDVANCE spotlight comes with a garansi 5 taun ti tanggal beuli. Garansi ieu nyertakeun cacad dina bahan sareng pagawean dina panggunaan normal.

For warranty claims, technical support, or any questions not covered in this manual, please contact your retailer or the LEDVANCE customer service directly. Keep your proof of purchase for warranty validation.