Bubuka
The Cooler Master MasterLiquid 360 Core II is an advanced all-in-one (AIO) liquid CPU cooler designed for efficient heat dissipation and quiet operation. This manual provides essential information for the proper installation, operation, and maintenance of your MasterLiquid 360 Core II. Please read this manual thoroughly before installation and retain it for future reference.
Image: The Cooler Master MasterLiquid 360 Core II CPU Liquid Cooler, showcasing the radiator, fans, and pump unit.
Setup sareng Instalasi
Proper installation is critical for optimal performance and longevity of your liquid cooler. Always ensure your system is powered off and unplugged before beginning installation. Refer to the included Quick Start Guide for detailed, step-by-step instructions specific to your CPU socket type.
Kasaluyuan:
- Soket Intel: LGA1851, LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150
- Soket AMD: AM5, AM4
Léngkah-léngkah Instalasi Umum:
- Nyiapkeun motherboard: Install the appropriate backplate and standoffs for your CPU socket type as indicated in the Quick Start Guide.
- Larapkeun Témpél Thermal: Larapkeun ipis, malah lapisan némpelkeun termal kana panyebaran panas terpadu CPU urang (IHS).
- Pasang Pompa/Pelat Tiis: Carefully place the pump/cold plate assembly onto the CPU, aligning it with the mounting holes. Secure it with the provided screws, tightening them in a cross pattern until snug.
- Pasang Radiator: Mount the radiator to an available fan mount location in your PC case (e.g., top, front, or rear), ensuring adequate airflow.
- Pasang Kipas Angin: Attach the fans to the radiator, ensuring they are oriented to push or pull air in the desired direction for optimal cooling.
- Sambungkeun kabel: Connect the pump power cable to the designated header on your motherboard (usually "AIO_PUMP" or "CPU_OPT"). Connect the fan cables to the CPU fan headers or a fan controller.
- Manajemén Kabel: Jalur kabel rapih pikeun nyegah gangguan komponén séjén atawa aliran hawa.
Image: The MasterLiquid 360 Core II liquid cooler installed inside a computer case, demonstrating its placement and connection to the CPU.
Parentah Operasi
Once installed, the MasterLiquid 360 Core II operates automatically, regulating pump and fan speeds based on CPU temperature. For advanced control and monitoring, you may use your motherboard's BIOS/UEFI settings or compatible software provided by your motherboard manufacturer.
- Mimitian mimiti: After installation, power on your system and monitor CPU temperatures using system monitoring software. Ensure fans and pump are operating.
- Pangimeutan Suhu: Regularly check CPU temperatures, especially during heavy workloads, to ensure the cooler is performing effectively.
- Kontrol kipas: Fan speeds are typically controlled via PWM (Pulse Width Modulation) signals from the motherboard. Adjust fan curves in your BIOS/UEFI for a balance between cooling performance and noise levels.
- Operasi pompa: The pump should run continuously. Ensure it is connected to a dedicated pump header or a fan header set to run at 100% speed for optimal flow.
Pangropéa
Pangropéa rutin ngabantosan mastikeun umur panjang sareng kinerja optimal tina cooler cair anjeun.
- beberesih lebu: Bersihkeun lebu tina sirip radiator sareng bilah kipas sacara berkala nganggo udara anu dikomprés atanapi sikat lemes. Akumulasi lebu tiasa ngahalangan aliran hawa sareng ngirangan efisiensi pendinginan.
- Pariksa Pipa: Inspect the tubing for any signs of kinks, damage, or leaks. While AIO coolers are sealed, visual inspection is recommended.
- Pamariksaan kipas: Pastikeun bilah kipas bébas tina halangan sareng muter kalawan bébas.
- Unit Pompa: The pump unit is maintenance-free. Do not attempt to open it.
Gambar: A lengkep view of the pump unit of the MasterLiquid 360 Core II, highlighting its design.
Pamérésan masalah
If you encounter issues with your MasterLiquid 360 Core II, refer to the following common troubleshooting steps:
- Suhu CPU anu luhur:
- Verify proper installation of the pump/cold plate on the CPU. Ensure screws are tightened evenly.
- Pariksa naha témpél termal diterapkeun leres.
- Confirm fans are spinning and oriented correctly for airflow.
- Ensure the pump is receiving power and operating (you may feel a slight vibration or hear a faint hum).
- Ngabersihan sagala akumulasi lebu dina sirip radiator.
- Noise kaleuleuwihan:
- Check for loose fan screws or cables interfering with fan blades.
- Adjust fan speed curves in your motherboard's BIOS/UEFI to reduce RPMs at lower temperatures.
- Ensure the pump is not vibrating excessively against the case.
- Pompa teu jalan:
- Verify the pump's power cable is securely connected to the correct header on the motherboard.
- Check BIOS/UEFI settings to ensure the pump header is enabled and set to a constant 100% speed.
Upami masalah tetep, hubungi dukungan palanggan Cooler Master pikeun bantosan salajengna.
spésifikasi
| Fitur | Rincian |
|---|---|
| Dimensi radiator | 394 x 119.2 x 27.2 mm |
| Pompa Diménsi | 83 x 76.2 x 52.3 mm |
| kipas Dimensi | 120 x 120 x 25 mm |
| Laju kipas | 650-1750 RPM ± 10% |
| Airflow | 70.5 CFM |
| Max tekanan hawa | 2 mmH₂O |
| Max Noise Level | 30 dBA |
| Fan MTTF (Mean Time To Failure) | 160,000 jam |
| Tipe Panyambung Daya | 4-pin |
| Voltage | 12 Volt (DC) |
| Wattage | 280 W |
| Sockets Intel cocog | LGA1851, LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150 |
| Sockets AMD cocog | AM5, AM4 |
| Beurat produk | 1650 gram |
| Item Kaasup | Quick Start Guide, Accessory Kit |
Émbaran jaminan
The Cooler Master MasterLiquid 360 Core II (MLW-D36M-A18PA-R1) comes with a garansi 5 taun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the official Cooler Master websitus atanapi kartu garansi anu kalebet sareng produk anjeun.
Simpen bukti pameseran anjeun pikeun klaim garansi.
Ngarojong
For technical support, product registration, or further inquiries, please visit the official Cooler Master support websitus:
Cooler Rojongan Master Websitus
Anjeun ogé tiasa mendakan sumber daya tambahan, FAQ, sareng unduhan supir dina situs wébna. websitus.
