SONOFF ZBMINIR2 ZigBee Smart Pindah Lampu Manual Instruksi

1. Bubuka

The SONOFF ZBMINIR2 is a compact ZigBee smart switch designed to integrate traditional lighting into a smart home system. It requires a neutral line for operation and a compatible ZigBee hub for full functionality. This device allows for remote control, voice control, and automation of connected lights and appliances.

The ZBMINIR2 also functions as a ZigBee router, extending the range and stability of your ZigBee network. Its small size facilitates installation behind existing wall switches.

Image: Four SONOFF ZBMINIR2 ZigBee Smart Switches, illustrating the product's compact design.

Produk Leuwihview Video

Video: Hiji leuwihview of the SONOFF ZBMINIR2 Zigbee Smart Switch, highlighting its features and compact size.

2. Émbaran Kasalametan

WARNING: Electrical installation should only be performed by a qualified electrician. Always turn off power at the circuit breaker before beginning any electrical work. Failure to do so may result in serious injury or death.

• Pastikeun catu daya utama dipareuman di pemutus sirkuit sateuacan dipasang.
• The device requires a neutral wire. Verify your electrical box has a neutral wire before installation.
• Ulah ngajalankeun alat ku leungeun baseuh atawa dina damp lingkungan.
• Ulah ngaleuwihan beban maksimal 10 Amps / 120 Volts.
• Jauhkeun alat tina jangkauan barudak.

3. Naon dina Box

• SONOFF ZBMINIR2 Smart Zigbee Switch (quantity as per pack, e.g., 4-pack includes 4 switches)

4. Spésifikasi

Image: Detailed specification diagram for the SONOFF ZBMINIR2, including dimensions and electrical ratings.

5. Setup jeung Instalasi

This section provides instructions for installing the SONOFF ZBMINIR2. Ensure you have read and understood the safety information before proceeding.

Pidéo Tutorial Pamasangan

Video: A step-by-step installation guide for the SONOFF ZBMINIR2, demonstrating wiring and placement.

Lengkah-demi-Lengkah Pituduh:

1. Pareum listrik: Turn off the main power supply at your circuit breaker to the light switch you intend to modify. Verify power is off using a voltage panguji.
2. Hapus saklar anu aya: Carefully remove the faceplate and unscrew the existing light switch from the wall box. Disconnect the wires from the old switch.
3. Wiring the ZBMINIR2:
   • Connect the Live (L-in) wire from your electrical supply to the 'L In' terminal on the ZBMINIR2.
   • Connect the Neutral (N) wire from your electrical supply to the 'N' terminal on the ZBMINIR2.
   • Connect the Load (L-out) wire (going to your light fixture) to the 'L Out' terminal on the ZBMINIR2.
   • If using an external switch, connect the two wires from your traditional switch to the 'S1' and 'S2' terminals on the ZBMINIR2.
   

   Image: Wiring diagram for the SONOFF ZBMINIR2, showing connections for Live, Neutral, Load, and external switch inputs.
4. Pasang ZBMINIR2: Carefully tuck the wired ZBMINIR2 into the wall box. Ensure wires are not pinched.
5. Pasang deui Panel Saklar: Reattach your original light switch and faceplate to the wall box.
6. Daya Hurung: Restore power at the circuit breaker. The device will automatically enter pairing mode (green LED indicator will flash slowly).

6. Parentah Operasi

6.1 Ngapasangkeun sareng ZigBee Hub

1. Ensure your SONOFF ZigBee hub (or compatible ZigBee hub) is powered on and in pairing mode.
2. Open the eWeLink app (or your preferred ZigBee hub app).
3. In the app, select the option to add a new device or scan for devices.
4. The ZBMINIR2 will automatically enter pairing mode when first powered on. If not, long-press the button on the ZBMINIR2 for 5 seconds until the green LED indicator flashes slowly.
5. Follow the on-screen instructions in your app to complete the pairing process.

6.2 Kontrol Aplikasi eWeLink

Once paired, you can control the ZBMINIR2 through the eWeLink app:

• Kontrol Hurung/Pareuman: Tap the device icon in the app to toggle the connected light/appliance on or off.
• Kontrol Adegan & Timer: Use the app to set schedules, countdown timers, or create smart scenes that automate actions based on other smart devices or conditions.
• Kontrol Grup: Group multiple ZBMINIR2 devices or other smart devices to control them simultaneously with a single command.

6.3 Kontrol sora

The ZBMINIR2 is compatible with voice assistants like Amazon Alexa and Google Home when connected to a compatible ZigBee hub and linked to your eWeLink account.

• Amazon Alexa: After linking your eWeLink account to Alexa, you can say commands like, "Alexa, turn on the living room lights."
• Imah Google: After linking your eWeLink account to Google Home, you can say commands like, "Hey Google, turn off the kitchen light."

Image: Illustration of voice control with Alexa and Google Home, smart timer settings, and group control functionality within the eWeLink app.

6.4 Nyabut Relay Mode

This mode separates the state of the external switch from the relay, allowing the physical switch to act as a trigger for smart scenes without directly controlling the power to the load. This is useful for maintaining smart bulb functionality even when the physical switch is toggled.

• Enable Detach Relay Mode in the eWeLink app settings for the ZBMINIR2.
• When enabled, the physical switch can be used to trigger smart scenes, while the connected smart bulb remains online and controllable via the app or voice commands.

Image: Comparison showing a smart bulb going offline with a traditional switch vs. staying online with ZBMINIR2's Detach Relay Mode.

6.5 ZigBee Router Functionality

The ZBMINIR2 acts as a ZigBee router, extending the signal range of your ZigBee network. This helps to improve the stability and coverage of your smart home devices, especially in larger homes or areas with signal interference.

Image: Diagram illustrating how ZBMINIR2 devices act as Zigbee routers to expand network coverage within a home.

7. Pangropéa

• beberesih: Use a dry, soft cloth to clean the device. Avoid using harsh chemicals or abrasive cleaners.
• Pembaruan firmware: Regularly check the eWeLink app for available firmware updates to ensure optimal performance and access to new features.
• Stabilitas Jaringan: Ensure your ZigBee hub is centrally located and that there are enough ZigBee router devices (like the ZBMINIR2) to maintain a strong mesh network.

8. Cara ngungkulan

• Alat Teu Ngabales:
  • Pariksa naha alatna hurung sareng pemutus sirkuit henteu pegat.
  • Verify the ZigBee hub is online and functioning correctly.
  • Ensure the ZBMINIR2 is within range of the ZigBee hub or another router device.
  • Try re-pairing the device if connectivity issues persist.
• Green LED Not Flashing During Pairing:
  • Pastikeun alat diaktipkeun.
  • Long-press the button on the ZBMINIR2 for 5 seconds to manually enter pairing mode.
• Kontrol Sora Teu Gawé:
  • Confirm that your eWeLink account is correctly linked to Alexa or Google Home.
  • Check the device name in the eWeLink app and ensure it is recognized by your voice assistant.
  • Verify your voice assistant device is online and connected to the internet.
• Smart Bulb Goes Offline (without Detach Relay Mode):
  • This is expected behavior if the physical switch cuts power to the smart bulb. Enable Detach Relay Mode in the app to prevent this.

9. Garansi jeung Rojongan

Kanggo inpormasi garansi sareng dukungan téknis, mangga tingal SONOFF resmi websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun pikeun klaim jaminan.

Sumberdaya Online:

• Nganjang ka SONOFF Store on Amazon