SINOTIMER DDS6619

SINOTIMER DDS6619 Din Rail Single Phase Energy Meter User Manual

Model: DDS6619

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER DDS6619 Din Rail Single Phase Energy Meter. This device is designed for measuring active energy consumption in single-phase AC systems. Please read this manual thoroughly before installation and use to ensure proper function and safety.

SINOTIMER DDS6619 Din Rail Single Phase Energy Meter front view

Gambar 1: Hareupeun view of the SINOTIMER DDS6619 Din Rail Single Phase Energy Meter, showing the LCD display and terminal connections.

2. Émbaran Kasalametan

Mangga perhatoskeun tindakan pencegahan kaamanan ieu pikeun nyegah tatu sareng karusakan kana alat:

3. Eusi Paket

Saatos muka bungkusan, mangga pariksa yén sadaya barang aya sareng henteu ruksak:

4. Fitur Produk

The DDS6619 energy meter offers a range of features for efficient power monitoring:

DDS6619 display modes showing temporary and total readings for kWh, voltage, current, power, frequency, and power factor

Image 2: Illustration of the DDS6619 display modes, demonstrating how temporary and total readings for various electrical parameters are shown.

5. Setup jeung Instalasi

5.1 Ukuran

The meter is designed for standard DIN rail mounting. Refer to the dimensions below for proper planning:

DDS6619 dimensions showing width 36.3mm, height 78.5mm, and depth 65.8mm

Image 3: Dimensional drawing of the DDS6619 meter, indicating its width (36.3mm), height (78.5mm), and depth (65.8mm) for installation planning.

5.2 Pamasangan

  1. Ensure the main power supply is turned off at the circuit breaker before proceeding.
  2. Mount the DDS6619 meter onto a standard 35mm DIN rail in your electrical panel.
  3. Ensure the meter is securely fastened to prevent movement.

5.3 Diagram Wiring

Follow the wiring diagram carefully. Incorrect wiring can cause damage to the meter or electrical system.

DDS6619 wiring diagram showing L and N connections for input and output

Image 4: Wiring diagram for the DDS6619 meter, illustrating the correct connections for live (L) and neutral (N) input and output terminals.

  1. Connect the incoming Live (L) wire to the terminal marked 'L' on the input side.
  2. Connect the incoming Neutral (N) wire to the terminal marked 'N' on the input side.
  3. Connect the outgoing Live (L) wire to the terminal marked 'L' on the output side.
  4. Connect the outgoing Neutral (N) wire to the terminal marked 'N' on the output side.
  5. Pariksa deui sadaya sambungan pikeun pageuh sareng leres sateuacan mulangkeun daya.

6. Parentah Operasi

6.1 Kakuatan Hurung

After successful installation and wiring, restore power to the circuit. The meter's LCD display will illuminate, showing the current readings.

6.2 Modeu Paparan

The meter features a dual-row display. The top row cycles through various temporary electrical parameters, while the bottom row consistently shows the total power consumption (kWh).

6.3 Reset Function for Temporary kWh

The temporary kWh reading can be reset to zero for monitoring consumption over specific periods.

DDS6619 reset function explanation showing temporary and total power consumption and reset button

Image 5: Diagram illustrating the reset function. The top display shows temporary power consumption (resettable), the bottom shows total power consumption (not resettable), and indicates to hold the reset button for 6 seconds.

  1. Locate the reset button on the front panel of the meter.
  2. Press and hold the reset button for approximately 6 seconds.
  3. The temporary kWh value on the top display will reset to zero. The total power consumption on the bottom display will remain unchanged.

7. Spésifikasi

ParameterNilai
ModélDDS6619
Dipeunteun Voltage120VAC
Dipeunteun Ayeuna5(80)A
Frékuénsi60Hz
Kelas akurasi1.0
tampilanLCD sareng Lampu Latar Biru
Pamasangan35mm DIN Rail
BahanABS Retardant seuneu
Ukuran Paket2.72 x 1.65 x 0.63 inci
Beurat0.48 ons

8. Pangropéa

The DDS6619 energy meter requires minimal maintenance. Follow these guidelines to ensure its longevity:

9. Cara ngungkulan

If you encounter issues with your DDS6619 meter, refer to the following common problems and solutions:

MasalahMungkin Cukang lantarananaSolusi
No display/Meter not powering onNo power supply; Incorrect wiring; Faulty meterCheck power supply to the circuit. Verify wiring connections according to the diagram. If problem persists, contact support.
Bacaan teu akuratIncorrect wiring; Overload; External interferenceRe-check wiring. Ensure load does not exceed meter's maximum current rating. Isolate from strong electromagnetic fields.
Temporary kWh not resettingReset button not held long enoughPress and hold the reset button for a full 6 seconds.
Total kWh reading is zero or incorrectIncorrect wiring; Meter malfunctionVerify wiring. Note that total kWh cannot be reset. If consistently incorrect, contact support.

10. Garansi jeung Rojongan

SINOTIMER products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official SINOTIMER websitus.

Anjeun tiasa manggihan inpo nu leuwih lengkep sareng wincik kontak dina SINOTIMER Store on Amazon.

Dokumén Patali - DDS6619

Praview SINOTIMER DDS6619 Series Guide Rail Pangukuran Pindah Manual Instruksi
Instruksi manual pikeun SINOTIMER DDS6619 runtuyan pituduh rail tipe pangukuran switch. Rincian spésifikasi teknis, wiring, kontrol aplikasi via Smart Life / Tuya, parentah operasi, sarta precautions kaamanan pikeun monitoring énergi pinter.
Praview Manual Pamaké SINOTIMER SVP719: Voltage Protéktor, Méter Énergi, sareng Monitor Konsumsi Daya
Manual pamaké komprehensif pikeun SINOTIMER SVP719, detailing fitur na salaku adjustable leuwih / handapeun vol.tage protector, surge protector, over-current relay, sareng méter énergi Watt/kWh pikeun ngawaskeun konsumsi daya.
Praview SINOTIMER TM-610 Digital Time Pindah pikeun DIN Rail - Manual pamaké sarta spésifikasi
spésifikasi lengkep, diagram wiring, sarta parentah operasi pikeun SINOTIMER TM-610 switch waktos digital, dirancang pikeun DIN rail ningkatna.
Praview SINOTIMER TM928 Series HD LCD Digital Timer Pindah - Manual pamaké sarta spésifikasi
Pituduh lengkep pikeun switch timer digital séri SINOTIMER TM928, ngawengku fitur, spésifikasi, setelan, jeung kabel pikeun model kawas TM919, TM920, TM928, TM928S, TM928R, jeung TM929.
Praview SINOTIMER TM929: Guía del Temporizador Analógico Diario de 24 Horas
Ngajalajah el temporizador analógico diario SINOTIMER TM929 de 24 jam. Ieu manual proporsi informasi detallada sobre sus características, spésifikasi técnicas y diagramas de cableado for un fácil instalación y operación.
Praview SINOTIMER TM-630A/TM-630S Digital Timer: Fitur sareng Spésifikasi
spésifikasi teknis lengkep jeung fitur pikeun SINOTIMER TM-630A na TM-630S timer programmable digital, kaasup catu daya, rentang timing, dimensi, sarta wiring.