Kicker KS-Series 6x9 Coaxial Speakers Instruction Manual
Model: 51KSC6904
Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your Kicker KS-Series 6x9 Coaxial Speakers (Model 51KSC6904). Please read this manual thoroughly before attempting installation or operation to ensure proper use and to maximize the performance and longevity of your speakers.
Émbaran Kasalametan penting
- Pamasangan profésional disarankeun: For optimal performance and safety, it is highly recommended that these speakers be installed by a qualified car audio professional.
- Penanganan kakuatan: Pastikeun Anjeun amplifier's power output matches the recommended power handling of these speakers to prevent damage. Overpowering or underpowering can lead to speaker failure.
- Wiring: Always use appropriate gauge wiring for speaker connections. Incorrect wiring can cause overheating or damage to your audio system.
- Ventilasi: Pastikeun ventilasi anu cekap di sakitar speaker sareng amplifier pikeun nyegah overheating.
- Perlindungan dédéngéan: Paparan volume anu luhur dina jangka waktu anu lila tiasa nyababkeun karusakan dédéngéan permanén. Ati-ati nalika nyaluyukeun volume.
Eusi pakét
Before beginning installation, please verify that all the following items are included in your package:
- 2 x Kicker 51KSC6904 KS-Series 6x9" Coaxial Speakers
- 2 x 1" Silk-dome Tweeters (integrated)
- 2 x Speaker Grilles
- Pemasangan Hardware (sekrup, klip)
- 1 x Kicker Branded Can Koozie (bundle accessory)
Image: Pair of Kicker KS-Series 6x9 Coaxial Speakers with grilles.
Image: One Kicker KS-Series 6x9 Coaxial Speaker with its protective grille.
Image: One Kicker KS-Series 6x9 Coaxial Speaker without its grille, showing the cone and tweeter.
Image: A single protective grille for the Kicker KS-Series 6x9 speaker.
Image: Kicker branded can koozie, included as a bundle accessory.
Guide instalasi
Pamasangan Pertimbangan
The Kicker KS-Series speakers feature a thin-mount design, allowing them to fit easily behind most factory grilles and in various vehicle applications. Before mounting, ensure the chosen location provides sufficient clearance for the speaker's depth and diameter.
- Diaméterna liang dipasang: 5-11/16 x 8-7/16 inches (14.45 x 21.43 cm)
- Top Mount Depth: 3-3/16 inci (8.1 cm)
- Bottom Mount Depth: 3-11/16 inci (9.37 cm)
- Tweeter Protrusion: 1/16 inci (0.16 cm)
Use the provided mounting hardware to secure the speakers firmly in place. Avoid over-tightening screws, which can damage the speaker frame.
Parentah Wiring
These speakers have a rated impedance of 4 ohms. Connect the speakers to an amplifier that is stable at a 4-ohm load and provides a recommended power output of up to 150 watts RMS per channel. Ensure correct polarity (+ to + and - to -) when connecting the speaker wires to both the speaker terminals and the amplifier terminals. Incorrect polarity can lead to reduced bass response and poor sound imaging.
It is recommended to use high-quality speaker wire of appropriate gauge (e.g., 16-gauge or thicker) for optimal power transfer and sound quality.
Operasi
Saatos dipasang, sambungkeun sumber audio anjeun ka amplifier. Start with the amplifier's gain settings at their minimum and gradually increase them until the desired volume is achieved without distortion. These speakers are designed to deliver clear and detailed audio reproduction across a wide frequency range.
Periode istirahat: Like many audio components, these speakers may benefit from a break-in period. Play them at moderate volumes for several hours before attempting to play them at their maximum capabilities. This allows the speaker's suspension components to loosen and perform optimally.
Pangropéa sareng Perawatan
- beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun kisi-kisi sareng sakuriling spiker. Hindarkeun nganggo bahan kimia anu keras atanapi pembersih anu kasar.
- Kaayaan Lingkungan: While designed for automotive use, avoid exposing the speakers to excessive moisture, extreme temperatures, or direct sunlight for prolonged periods, as this can degrade materials over time.
- Pamariksaan: Periodically inspect speaker cones and surrounds for any signs of damage or wear.
Pamérésan masalah
If you experience issues with your Kicker KS-Series speakers, refer to the table below for common problems and their solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Teu aya sora ti panyatur | kabel leupas atawa dipegatkeun Amplifier teu Powered on Incorrect input selection on head unit | Pariksa sagala speaker na ampsambungan lifier Verifikasi amplifier power and fuse Ensure correct audio source is selected |
| Sora menyimpang atawa teu jelas | Ampgain lifier diatur teuing tinggi Kabel spiker disingget Kone/surround speaker ruksak | Ngurangan ampgain liifier Inspect wiring for shorts Contact Kicker support for speaker inspection/replacement |
| Lemah atanapi henteu bass | Incorrect speaker polarity Setélan crossover salah Teu cukup ampkakuatan Lifier | Verify speaker wire polarity Adjust head unit or amplifier crossover settings Mastikeun amplifier provides adequate power |
| Sora intermittent | sambungan leupas Overheating amppangagung | Pariksa sadaya sambungan kabel Pastikeun ventilasi ditangtoskeun pikeun amplifier; reduce volume |
Spésifikasi teknis
| Fitur | Spésifikasi |
|---|---|
| Desain Speaker | 2-Jalan Coaxial |
| Ukuran Woofer | 6 x 9 inci |
| Ukuran Tweeter | 1 inci |
| Impedansi dipeunteun | 4 ohm |
| Dianjurkeun AmpDaya panguat (RMS) | 150 Watt |
| Sensitipitas | 92 dB |
| Réspon Frékuénsi | 30-21k Hz |
| Diaméterna liang ningkatna | 5-11/16 x 8-7/16 inches (14.45 x 21.43 cm) |
| Top Mount Depth | 3-3/16 inci (8.1 cm) |
| Bottom Mount Depth | 3-11/16 inci (9.37 cm) |
| Tweeter Tonjolan | 1/16 inci (0.16 cm) |
| Bahan Woofer | Polypropylene with Rubber Surrounds |
| Bahan Tweeter | Silk-dome |
| Item Beurat | 15.9 pon (7.21 kg) |
| Ukuran Paket | 18.63 x 12 x 4.44 inci (47.32 x 30.48 x 11.28 cm) |
Garansi sarta Rojongan Palanggan
Kicker products are designed for durability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Kicker websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.
If you require technical assistance, troubleshooting beyond this manual, or warranty service, please contact Kicker customer support through their official website or authorized service centers. Provide your product model number (51KSC6904) and a detailed description of the issue when contacting support.
