Tyger Auto T2 Low Profile Soft Roll-up Tonneau Cover

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your Tyger Auto T2 Low Profile Soft Roll-up Tonneau Cover. Designed for durability and ease of use, this cover helps protect your truck bed cargo from the elements while maintaining a sleek appearance. Please read these instructions thoroughly before proceeding with installation or use.

2. Émbaran Kasalametan

• Salawasna nganggo alat pelindung diri anu merenah, sapertos sarung tangan sareng pelindung panon, nalika pamasangan.
• Ensure the truck bed is clean and free of debris before installation to prevent damage to the cover or vehicle.
• Do not operate the vehicle with the tonneau cover improperly secured.
• Avoid placing heavy or sharp objects directly on the cover, as this may cause damage.
• Keep hands and fingers clear of moving parts when rolling or unrolling the cover.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Cover assembly (pre-assembled vinyl tarp with crossbars and front header)
• Rel samping (kénca jeung katuhu)
• Pamasangan clamps
• Weather seals (if applicable)
• Buku pituduh

4. Kasaluyuan jeung Fitment

This Tyger Auto T2 Low Profile Soft Roll-up Tonneau Cover is compatible with:

• Kandaraan: 2015-2025 Ford F-150
• Jenis ranjang: Fleetside (Not for Stepside)
• Panjang ranjang: 5.5' (67") Bed

It is crucial to confirm your truck's bed length before installation. The cover is designed to fit specific bed dimensions.

5. Setup jeung Instalasi

The Tyger Auto T2 Tonneau Cover features an easy, no-drilling installation process. Follow these steps for proper setup:

1. Nyiapkeun Ranjang Treuk: Clean the truck bed rails thoroughly to ensure proper adhesion of weather seals and secure clamping.
2. Install Front Header Seal: Apply the provided weather seal to the front bulkhead of the truck bed, ensuring a tight fit.
3. Position Side Rails: Place the left and right side rails onto the truck bed rails. Ensure they are aligned correctly and extend over the bed space, allowing full access to stake pockets.
4. Secure Side Rails with Clamps: Use the stainless steel clamps to secure the side rails to the truck bed. Tighten the clamps evenly along the length of the rails. Note: Small holes may need to be cut in over-the-bedrail bedliners to secure clamps; under-the-bedrail bedliners do not require modification.
5. Attach Cover Assembly: Place the pre-assembled cover onto the installed side rails, aligning the front header with the front of the bed. Secure the front header to the side rails using the integrated fasteners.
6. Saluyukeun tegangan: The cover includes a tension system at the end of the side rails. Adjust this system to keep the vinyl tarp tight and wrinkle-free.

6. Parentah Operasi

The T2 Low Profile Soft Roll-up Tonneau Cover is designed for convenient access to your truck bed.

6.1. Opening the Cover (Rolling Up)

1. Leupaskeun Latch: At the tailgate end, locate and release the latch lock system.
2. Detach Velcro: Gently peel back the Velcro strip along both side rails, starting from the tailgate.
3. Gulung ka luhur: Carefully roll the marine-grade vinyl tarp towards the cab of the truck. The built-in horizontal crossbars will roll up with the tarp.
4. Secure in Open Position: Once fully rolled, secure the cover at the back of the cab using the integrated straps or buckles to maximize access to the pickup truck bed.

6.2. Closing the Cover (Rolling Down)

1. Unsecure Cover: Release the straps or buckles holding the cover in the open position.
2. Roll Down: Slowly unroll the vinyl tarp towards the tailgate, ensuring it remains centered on the side rails.
3. Secure Velcro: Press down firmly along the Velcro strips on both side rails to secure the cover.
4. Ngaitkeun kait: At the tailgate end, engage the latch lock system to fully secure the cover.

6.3. Utilizing Bed Rail Surface

The T2's sleek low-profile design allows the cover rails to extend over the bed space, enabling full utilization of the bed rail surface and stake pockets for mounting other truck bed accessories.

7. Pangropéa

Regular maintenance will extend the life and appearance of your tonneau cover.

• beberesih: Wash the vinyl tarp regularly with mild soap and water. Avoid harsh chemicals or abrasive cleaners, as these can damage the vinyl. Rinse thoroughly and allow to air dry.
• Vinyl Protection: Apply a UV protectant specifically designed for vinyl to prevent fading and cracking due to sun exposure.
• Pariksa Hardware: Periodically inspect all clamps, latches, and fasteners to ensure they are secure and functioning correctly. Tighten any loose hardware.
• Segel Cuaca: Check weather seals for wear or damage. Replace if necessary to maintain water resistance.
• Penyesuaian tegangan: Adjust the tension system as needed to keep the cover taut, especially in varying weather conditions.

8. Cara ngungkulan

Ieu mangrupikeun solusi pikeun masalah umum anu anjeun tingali:

• Cover Not Lying Flat/Wrinkled: Adjust the tension system located at the end of the side rails. Ensure the cover is properly centered and the Velcro strips are fully engaged.
• bocor cai: Check all weather seals, especially at the front bulkhead and along the side rails. Ensure clamps are tight and the cover is properly latched at the tailgate. Minor water intrusion during heavy rain is possible with any soft cover.
• Difficulty Rolling/Unrolling: Ensure the side rails are clean and free of obstructions. Check that the latch system is fully disengaged when rolling up.
• Leupas Clamps: Periodically re-tighten all mounting clamps to ensure the side rails remain securely attached to the truck bed.

9. Spésifikasi

10. Garansi jeung Rojongan

Produk ieu dirojong ku a HARANSI UMUR LIMITED for US customers. For warranty claims, technical support, or any questions regarding your Tyger Auto T2 Tonneau Cover, please contact Tyger Auto customer service directly. Refer to the product packaging or the official Tyger Auto websitus pikeun inpo kontak panganyarna.