1. Produk Langkungview
The MiBOXER Y3 RGB+CCT Vertical Remote provides comprehensive control over compatible RGB+CCT LED lighting systems. This remote allows for precise adjustments of RGB colors, color temperature (CCT), and brightness. Utilizing 2.4GHz wireless technology, it ensures reliable communication with your lighting devices. Its ergonomic vertical design and intuitive interface are designed for ease of use, enabling users to effortlessly customize lighting for various environments.
Fitur konci:
- RGB, CCT, and Brightness Control: Adjust colors, color temperature, and brightness with ease.
- Téknologi Wireless 2.4GHz: Mastikeun konektipitas anu dipercaya, jarak jauh.
- Vertical Design: Ergonomic and easy-to-use layout for quick adjustments.
- Multi-Color and Dimmable: Create customized lighting scenes with vibrant colors and dimming options.
- Kasaluyuan serbaguna: Works with MiBOXER RGB+CCT lighting products.
Figure 1: MiBOXER Y3 RGB+CCT Vertical Remote with its retail packaging.
2. Parentah Setup
2.1 Pamasangan batré
The MiBOXER Y3 remote requires two AAA batteries (not included). To install:
- Teangan tempat panutup kompartemen batré dina tonggong remote.
- Geser panutupna ka handap pikeun muka.
- Selapkeun dua batré AAA, mastikeun polaritasna bener (+ jeung -).
- Geser panutup deui kana tempatna dugi ka klik aman.
2.2 Ngahubungkeun Remote ka Alat Lampu
To control your MiBOXER RGB+CCT lighting devices, the remote must be linked to them. This process typically involves a specific sequence of actions on both the remote and the lighting device. Refer to your specific MiBOXER lighting product's manual for detailed linking instructions, as the procedure may vary slightly between different light models. A common linking procedure is as follows:
- Ensure the lighting device is powered off.
- Power on the lighting device.
- Within 3 seconds of powering on the light, press the "Zone ON" button (labeled "I" or "1") on the remote for the desired zone.
- Lampuna kedah kedip-kedip sababaraha kali, nunjukkeun sambungan anu suksés.
- If linking fails, repeat the process.
To unlink a device from a zone, power on the light and within 3 seconds, press the "Zone ON" button (labeled "I" or "1") five times rapidly for the corresponding zone. The light should flash multiple times to confirm unlinking.
3. Parentah Operasi
The MiBOXER Y3 remote features an intuitive layout for controlling various lighting parameters. Familiarize yourself with the buttons and sliders as shown in Figure 2.
Figure 2: MiBOXER Y3 Remote Control button layout and functions.
3.1 Fungsi Tombol:
| Tombol / Kontrol | Fungsi |
|---|---|
| Lampu Indikator | Flashes to confirm button presses. |
| RGB slaider | Slide to select desired RGB color. |
| Kacaangan slaider | Slide to adjust light brightness (0-100%). |
| Master ON (I/ON) | Ngahurungkeun sadaya lampu anu nyambung. |
| Master OFF (O/OFF) | Mareuman sadaya lampu anu nyambung. |
| White Light (W) | Activates pure white light mode. |
| Speed-/CCT-/Saturation- | Decreases speed in dynamic mode, decreases color temperature (warmer white), or decreases color saturation. |
| Speed+/CCT+/Saturation+ | Increases speed in dynamic mode, increases color temperature (cooler white), or increases color saturation. |
| Dynamic Mode (M) | Cycles through various dynamic lighting effects. Press repeatedly to change effects. |
| Zone ON (1, 2, 3 - "I") | Turns ON lights linked to the specific zone. Used for linking/unlinking. |
| Zone OFF (1, 2, 3 - "O") | Mareuman lampu anu nyambung ka zona khusus. |
3.2 Operasi Umum:
- Ngahurungkeun/Mareuman Lampu: Use the "Master ON" or "Master OFF" buttons for all lights, or "Zone ON" / "Zone OFF" for specific zones.
- Adjusting Color: Slide your finger along the "RGB Slider" to select your desired color.
- Nyaluyukeun Caang: Slide your finger along the "Brightness Slider" to increase or decrease the light intensity.
- Adjusting Color Temperature (CCT): In white light mode, use the "CCT-" and "CCT+" buttons to make the white light warmer or cooler.
- Modeu dinamis: Press the "M" button to activate dynamic lighting modes. Use "Speed-" and "Speed+" to adjust the speed of the current dynamic effect.
- Pangaluyuan Saturasi: In RGB mode, use "Saturation-" and "Saturation+" to adjust the intensity of the color.
4. Pangropéa
Proper maintenance ensures the longevity and optimal performance of your MiBOXER Y3 remote.
- beberesih: Wipe the remote with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the surface or internal components.
- Ngagantian batré: Replace batteries when the indicator light becomes dim or the remote's response becomes inconsistent. Always use new AAA batteries and dispose of old batteries responsibly.
- Panyimpenan: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
- Hindarkeun Uap: This remote is not waterproof. Keep it away from water and high humidity environments.
5. Cara ngungkulan
If you encounter issues with your MiBOXER Y3 remote, refer to the following troubleshooting steps:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Remote not responding to button presses. | Batré maot atanapi lemah. Remote teu nyambung ka lampu. Kaluar jangkauan. | Ganti batré. Re-link the remote to the lighting devices (refer to Section 2.2). Move closer to the lighting devices. |
| Lampu teu robah warna/kacaangan. | Modeu salah dipilih. Remote not linked to the specific zone. | Ensure you are in the correct mode (e.g., RGB for color, CCT for white temperature). Verify the remote is linked to the correct zone. |
| Indicator light not flashing. | Batré paéh. Kasalahan internal. | Ganti batré. Upami masalahna teras-terasan saatos ngaganti batré, hubungi dukungan palanggan. |
| Interference with other 2.4GHz devices. | Proximity to other wireless devices. | Move the remote or other 2.4GHz devices further apart. |
6. Spésifikasi
Technical specifications for the MiBOXER Y3 RGB+CCT Vertical Remote.
| Fitur | Rincian |
|---|---|
| Nomer modél | Y3 |
| merek | MiBOXER |
| Tipe Kontrol | RGB+CCT Vertical Remote |
| Téhnologi nirkabel | 2.4GHz |
| Sasayogian tanaga | 2 x Batré AAA (teu kalebet) |
| Fitur husus | RGB/CCT/brightness dimmable |
| Item Beurat | 4.8 ons (kira-kira 136 gram) |
| Ukuran Paket | 6.5 x 3 x 2 inci (kira-kira 16.5 x 7.6 x 5.1 cm) |
Figure 3: Dimensions of the MiBOXER Y3 Remote Control and its packaging.
7. Garansi jeung Rojongan
For warranty information, please refer to the documentation provided with your specific MiBOXER lighting product or contact the retailer where the product was purchased. MiBOXER products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support or further assistance, please visit the official MiBOXER website or contact their customer service department. Contact details are usually available on the product packaging or the brand's official online presence.
