Manual+

Paru P16

Paruu P16 Wearable Breast Pump Instruksi Manual

Modél: P16

Brand: Paruu

Bubuka

The Paruu P16 Hands Free Breast Pump is designed to provide a comfortable, efficient, and discreet pumping experience for breastfeeding mothers. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your breast pump to ensure optimal performance and milk collection.

Komponén produk

Your Paruu P16 Wearable Breast Pump package includes the following components:

  • Motor Pompa
  • Milk Collector (150ml / 5 oz capacity)
  • Flange (24mm pre-installed)
  • Flange Inserts (19mm, 21mm)
  • Diafragma
  • Klep
  • Kabel Ngecas Tipe-C
  • Kartu Ukur Nipple
Paruu P16 Breast Pump components including two pumps, charging cables, and flange inserts.

Gambar: Leuwihview of the Paruu P16 Breast Pump and its included accessories.

Disetél

Muatan Awal

Before first use, fully charge the breast pump. Connect the Type-C charging cable to the pump motor and a 5V-1A power source. Charge for approximately 2.5 hours until the battery indicator shows a full charge.

Paruu P16 Breast Pump charging via USB-C cable.

Image: The Paruu P16 pump motor being charged with a USB-C cable.

Ngabersihan sareng Disinfeksi

Disassemble all breast pump parts that come into contact with breast milk for cleaning. The pump motor should NOT be washed or sanitized.

  1. Wash parts (Flange Insert, Milk Collector, Valve, Flange) in warm soapy water for 3-5 minutes.
  2. Sanitize with boiling water or steam in a sanitizing pot for 5-10 minutes. Ensure water temperature is between 104°F-140°F (40°C-60°C).
  3. Ngidinan sadaya bagian ka hawa garing lengkep sateuacan dipasang deui.
Diagram showing disassembly and cleaning steps for the Paruu P16 Breast Pump.

Image: Visual guide for disassembling the pump for cleaning, highlighting the parts that need washing.

Majelis

Assemble the breast pump only after all parts are clean and dry. Follow these steps carefully:

  1. Push the valve into the collector without gaps.
  2. Gently push the flange into the collector without gaps.
  3. Attach the diaphragm to the pump motor, ensuring it is sealed well.
  4. Assemble the pump motor and milk collector, ensuring they are tightly connected without gaps.
Step-by-step diagram for assembling the Paruu P16 Breast Pump.

Image: Detailed steps for assembling the breast pump components.

Ukuran Flange

Choosing the correct flange size is crucial for comfort and efficiency. Use the provided Nipple Measurement Card to find your ideal size:

  1. Stimulate the nipple until it perks up (don't skip this step).
  2. Find the nipple base.
  3. Measure your nipple diameter using the measurement card.
  4. Pilih liang anu tiasa nyocogkeun kana dasar nipple anjeun.
  5. Choose the corresponding flange size (19mm, 21mm, 24mm inserts are included).
Diagram showing how to measure nipple size for correct flange selection.

Image: Guide on how to correctly measure your nipple for the appropriate flange size.

Parentah Operasi

Daya Hurung/Pareuman

Long-press the On/Off/Mode Selection button to turn the device on or off.

Pamilihan Mode

The Paruu P16 offers 4 distinct modes to optimize your pumping experience. Short-press the On/Off/Mode Selection button to switch between modes:

  • Modeu stimulasi: Begins with a quick and short sucking pattern to get your milk to start flowing.
  • Mode éksprési: Features a slow and long sucking pattern for deeper and more effective milk expression.
  • Two-in-one Mode: Combines 8 quick and short sucking patterns followed by a slow and long sucking pattern.
  • Dual-frequency Mode: Specifically designed for breastfeeding moms with inverted and flat nipples. This mode begins with low suction-pause-high suction-release to promote smoother pumping.
Paruu P16 Smart Display showing buttons for mode selection and suction level adjustment.

Image: The pump's LED display and control buttons for easy operation.

Nyeuseup Level adjustment

Each mode has 12 adjustable suction levels. Use the '+' button to increase suction and the '-' button to decrease suction. The current suction level is displayed on the LED screen.

Panyimpenan susu

After pumping, carefully remove the pump from your breast. To pour milk, gently remove the pump motor and align the spout of the milk collector with your storage bottle. Pour the milk into a clean, sterile bottle or storage bag.

Diagram showing how to pour breast milk from the collector into a bottle.

Image: Instructions for safely pouring collected breast milk.

Video: A one-minute guide demonstrating the setup, cleaning, and operation of the Paruu P16 Wearable Breast Pump.

Pangropéa

beberesih

Regular cleaning of your breast pump parts is essential for hygiene and optimal performance. Always clean parts that come into contact with breast milk immediately after each use. Refer to the

Dokumén Patali - P16

Praview Paruu X2 Wearable Breast Pump Pamaké Manual
Manual pamaké komprehensif pikeun Paruu X2 Double Wearable Breast Pump, detailing komponén produk, kadali, parentah pamakéan, beberesih, perawatan, ngungkulan, sarta spésifikasi teknis pikeun leungeun-free, pompa payudara listrik portabel ieu.
Praview Paruu R10 Wearable Breast Pump Pituduh Pamaké
Buku pituduh pikeun Pompa Payudara Paruu R10, rinci ngeunaan kaamanan, komponén produk, rakitan, pamakean, spésifikasi, sareng inpormasi patuh pikeun pompa payudara listrik gratis leungeun ieu.
Praview Paruu Wearable Breast Pump P20 Pamaké Manual
Manual pamaké pikeun Paruu P20 Wearable Breast Pump, ngawengku informasi kaamanan, ngecas, beberesih, disinfeksi, pancegahan assembly, tips, spésifikasi, jeung jaminan.