MoKo Rechargeable Headlamp Manual Pamaké MK2515

1. Bubuka

This manual provides instructions for the MoKo Rechargeable Headlamp, Model MK2515. This device is a versatile 3-in-1 lighting solution, functioning as a primary headlamp, a work light, and a portable multipurpose light. It features high brightness, multiple lighting modes, and a rechargeable battery, suitable for various outdoor activities and maintenance tasks.

2. Produk Langkungview

The MoKo Headlamp MK2515 integrates several lighting components and controls for diverse illumination needs.

Figure 2.1: MoKo Rechargeable Headlamp MK2515 showing the main headlamp unit and the detachable multipurpose light.

komponén:

• Main Headlamp Unit: Equipped with XPE and COB lamp beads for various lighting modes.
• Headband adjustable: Elastic and adjustable for comfortable wear.
• Multipurpose Light (Detachable): Functions as a work light, portable torch, camping light, and power bank. Features a digital display for battery level.
• Helmet Hooks: Included for secure attachment to hard hats.

Kadali:

• Tombol Daya: Controls power on/off and cycles through lighting modes.
• Sensor Switch: Activates or deactivates the motion sensor mode.

Gambar 2.2: Hulunaamp's work light can be adjusted up to 270 degrees for directional illumination.

Figure 2.3: The multipurpose light can be easily detached and used independently.

3. Setélan

3.1 Ngecas Headlamp

1. Locate the USB-C charging port on the multipurpose light unit.
2. Connect the provided USB-C cable to the port and the other end to a compatible USB power source (e.g., wall adapter, computer).
3. The digital display on the multipurpose light will show the charging progress. A full charge typically takes 2-3 hours.
4. Saatos dicas pinuh, pegatkeun sambungan kabel.

Figure 3.1: Charging the headlamp's multipurpose light unit.

3.2 Maké Headlamp

1. Teundeun headlamp on your head with the main light unit positioned at the front.
2. Adjust the elastic headband using the buckle to ensure a snug and comfortable fit. The headband should be secure but not overly tight.
3. If attaching to a helmet, use the included helmet hooks to secure the headband to the helmet's edge.

Figure 3.2: Adjusting the elastic headband for a secure fit.

Figure 3.3: Using the included helmet hooks to attach the headlamp kana hat teuas.

4. Parentah Operasi

4.1 Main Headlamp (XPE LEDs) Operation

Press the Power Button to cycle through the following modes:

• XPE Center Light On: Illuminates the central XPE LED.
• XPE 5 Main Lights On: Activates the five primary XPE LEDs.
• XPE 4 Auxiliary Lights On: Activates the four auxiliary XPE LEDs.
• XPE 5 Main Lights & 4 Auxiliary Lights On: All XPE LEDs are active for maximum brightness.
• Modeu SOS: Flashing light for emergency signaling.

Figure 4.1: Various XPE lighting modes of the main headlamp.

4.2 Work Light (COB LED) Operation

The work light is integrated into the multipurpose light unit. When attached to the headlamp, it can be adjusted 270 degrees. Press the Power Button on the multipurpose light to cycle through these modes:

• COB White Light: Standard white illumination.
• COB Warm Light: Softer, warmer illumination.
• COB White Light & Warm Light: Combines both white and warm COB lights.
• COB Red Light SOS Mode: Flashing red light for emergencies or signaling.

Figure 4.2: COB work light modes and 270-degree rotation capability.

4.3 Sensor Mode

To activate the sensor mode, press the dedicated Sensor Switch. In this mode, you can turn the light on or off by waving your hand in front of the sensor, providing hands-free operation.

4.4 Multipurpose Light Functions

The multipurpose light unit can be detached from the headlamp for independent use:

• Portable Torch/Campdina Cahaya: Use it as a handheld light source.
• Fungsi Power Bank: The 3000 mAh battery can be used to charge other small electronic devices via its USB output port.

Figure 4.3: The multipurpose light can function as a portable power bank.

5. Pangropéa

5.1 beberesih

• Ngusap sirahamp and headband with a soft, damp lawon.
• Do not use abrasive cleaners or solvents, as these may damage the device.
• Ensure the charging port cover is securely closed to maintain IP44 water resistance.

5.2 Panyimpenan

• Nyimpen headlamp dina tiis, tempat garing jauh ti sinar panonpoé langsung jeung suhu ekstrim.
• If storing for an extended period, fully charge the battery before storage and recharge it every 3-6 months to maintain battery health.

6. Cara ngungkulan

• Lampu teu hurung: Pastikeun batréna geus dieusian. Pencét kenop daya pageuh.
• Cahayana samar: Tingkat batré bisa jadi low. Ngecas deui sirahamp.
• Sensor mode not responding: Ensure the sensor switch is activated. Check for obstructions in front of the sensor.
• asupan cai: Although IP44 waterproof, avoid prolonged submersion. Ensure all port covers are sealed.

7. Spésifikasi

8. Garansi jeung Rojongan

8.1 Émbaran jaminan

This MoKo Headlamp comes with a limited warranty of 2 months from the date of purchase. Please retain your proof of purchase for warranty claims.

8.2 Rojongan Palanggan

For any questions, technical assistance, or warranty claims, please contact the seller, Know White, through the Amazon platform where the product was purchased. Provide your order details for efficient support.