Bubuka
The LAUNCH Creader Elite for Land Rover Jaguar OBD2 Scanner is a comprehensive diagnostic tool designed for Land Rover and Jaguar vehicles, offering OE-level full system diagnostics, bi-directional control, and a wide array of special service functions. This manual provides detailed instructions for its setup, operation, maintenance, and troubleshooting.
Fitur produk
- OE-Level Full System Diagnosis: In-depth scanning of all available modules, including Engine, Transmission, ABS, SRS, and more.
- Bi-Directional Control (Active Tests): Perform specific tests on components like injectors, fuel pump, radiator fan, windows, and more.
- All Maintenance Services: Supports various reset, relearn, and calibration functions such as Oil Reset, EPB Reset, TPMS Reset, SAS Calibration, Battery Registration, Throttle Relearn, ABS Bleeding, Injector Coding, and Height Calibration.
- Fungsi OBD2 lengkep: Comprehensive OBD2 modes for all car brands after 1996, including Read/Clear Codes, Live Data Stream, Freeze Frame, I/M Readiness, O2 Monitor Test, EVAP Test, and On-board Monitor Test.
- Fitur anu ramah-pamaké: Auto VIN (for 2006+ vehicles), 4-in-1 Data Stream Graphing, Data Record & Playback, DTC Library, Diagnostic Report Generation (share/print), Online Feedback, and multi-language support (11 languages).
- Pembaruan Gratis Saumur hirup: One-click WiFi updates for new models and enhanced functions.
Eusi pakét
Saatos muka bungkusan, pariksa yén sadaya barang anu didaptarkeun di handap aya sareng dina kaayaan anu saé:
- 1 x LAUNCH Creader Elite OBD2 Scanner for JLR
- 1 x OBD2 Diagnostic Cable
- 1 x Tipe C Kabel Ngecas
- 1 x Gancang Mimitian Guide
- 1 x Manual Pamaké (dokumén ieu)
Disetél
1. Ngecas Awal
The device may have low battery upon arrival. Before first use, connect the scanner to a power source using the provided Type C Charging Cable. Charge the device for at least 3 hours to ensure full functionality. If the device does not power on after charging, please contact customer support.
2. Powering on / Pareum
To power on the device, press and hold the power button located on the side of the unit until the screen illuminates. To power off, press and hold the power button until a shutdown prompt appears, then confirm shutdown.
3. Nyambungkeun ka Kendaraan
- Panggihan port OBD2 kandaraan, biasana aya di handapeun dasbor di sisi supir.
- Connect the OBD2 Diagnostic Cable to the scanner and then to the vehicle's OBD2 port.
- Turn the vehicle's ignition to the "ON" position (engine off). The scanner will automatically power on and establish communication with the vehicle.
4. Sambungan Wi-Fi
For updates and online features, connect the device to a Wi-Fi network:
- From the main menu, select "Settings".
- Navigate to "Wi-Fi" and turn it on.
- Pilih jaringan anu dipikahoyong sareng lebetkeun kecap akses upami dipenta.
Parentah Operasi
1. Navigasi Sistem
The LAUNCH Creader Elite features a 4-inch touchscreen interface. Navigate through menus by tapping icons or swiping. Use the physical buttons for back, home, and power functions.
2. Diagnostik Sistem Lengkep Tingkat OE
This function allows for comprehensive scanning of all available electronic control units (ECUs) in Land Rover and Jaguar vehicles.
- Tina ménu utama, pilih "Diagnosis".
- Choose the vehicle brand (Land Rover or Jaguar).
- The system will attempt to perform an Auto VIN scan (for 2006+ models). If unsuccessful, you may need to manually input the VIN.
- Select "System Selection" to view all available modules (e.g., Engine, ABS, SRS, Transmission).
- Choose the desired system to perform functions such as:
- Baca/Hapus DTCs: Read diagnostic trouble codes and clear them after repairs.
- Aliran Data Langsung: View real-time sensor data in text or graphical format.
- Frame Frame: Capture a snapshot of vehicle conditions when a fault occurs.
- Émbaran ECU: Retrieve control unit details.
Image: The diagnostic tool screen showing OE-Level All System Diagnostics, with options to Read/Clear Codes, view Live Data Stream, Freeze Frame, and Check ECU Info. An illustration of a car with various systems highlighted (Engine, ABS, SRS, Transmission) indicates the comprehensive diagnostic capability.
3. Kontrol Dua Arah (Tés Aktif)
This feature allows the user to send commands to vehicle components to test their functionality.
- After selecting a vehicle system in "Diagnose", navigate to "Active Test" or "Bi-directional Control".
- Select the component you wish to test (e.g., Injector Buzz Test, Fuel Pump, Radiator Fan, Window/Wiper/Sunroof/Door Lock, Headlamp Test, A/C Activation).
- Follow the on-screen prompts to perform the test and observe the component's response.
Image: A visual representation of the bi-directional control feature, showing various active tests such as Modulate The Throttle, Acceleration Device Test, Turn Lights ON/OFF, Active Grille Shutter, Auto Start/Auto Stop, A/C Compressor Activation, Turn Sound Horn ON/OFF, Injector Buzz Test, and Fuel Pump & Value Test. The image also shows a car with arrows indicating commands being sent and received from the diagnostic tool.
4. Special Functions (Maintenance Services)
The tool provides numerous special functions for routine maintenance and repairs specific to Land Rover and Jaguar vehicles.
- Tina ménu utama, pilih "Diagnosis".
- Choose the vehicle brand.
- Navigate to "System Selection" and then "Special Function".
- Select the desired service function from the list. Common functions include:
- Minyak Lamp Reset: Reset oil service light and maintenance intervals.
- Reset EPB: Deactivate/activate brake control system for pad replacement.
- BMS Reset (Battery Registration): Re-match battery after replacement.
- Reset TPMS: Reset tire pressure sensors.
- Kalibrasi SAS: Calibrate steering angle sensor.
- Adaptasi throttle: Re-adjust throttle opening.
- Injector Coding: Kodeukeun nomer injektor anyar.
- Perdarahan ABS: Ngaleutikan sistem rem.
- Kalibrasi jangkungna: Calibrate air suspension height.
- Adaptasi transmisi: Adapt transmission parameters.
- Kalibrasi korsi: Calibrate seat positions.
- Kalibrasi Jandéla Panto: Calibrate window positions.
- Sunroof Calibration: Calibrate sunroof positions.
- Follow the on-screen instructions to complete the procedure.
Image: A collage illustrating various service functions available on the diagnostic tool, including Brake Reset, Oil Reset, Stop/Start Reset, SAS Calibration, Height Calibration, Seat Calibration, Battery Matching, and Throttle Relearn. Additional functions like Idle Relearn, Injector Coding, ABS Bleeding, and more are listed.
5. Fungsi OBD2 pinuh
This section covers standard OBD2 diagnostic functions compatible with all OBD2 compliant vehicles (1996 and newer).
- From the main menu, select "OBD II".
- The tool will automatically connect to the vehicle's OBD2 system.
- Pilih tina fungsi ieu:
- Baca Konci: Display current, pending, and permanent diagnostic trouble codes.
- Hapus Code: Bersihkeun DTC sareng pareuman Lampu Pariksa Mesin (MIL).
- Aliran Data Langsung: View real-time engine data.
- Frame Frame: View a snapshot of vehicle conditions when a fault code was set.
- Kesiapan I / M: Pariksa status monitor anu aya patalina sareng émisi.
- Tés Sénsor O2: Candak hasil tés monitor sénsor O2.
- Uji Monitor Dina Papan (Mode 6): Candak hasil tés pikeun komponén powertrain anu aya patalina jeung émisi.
- Uji Sistem EVAP (Mode 8): Mimitian uji bocor pikeun sistem EVAP kendaraan.
- Émbaran Kandaraan: Display VIN, Calibration ID, and Calibration Verification Numbers.
Image: An illustration detailing the 10 full OBD2 functions available, including Read Codes, Erase Codes, Freeze Frame, Live Data Stream, I/M Readiness, O2 Sensor Test, On-Board Monitor Test, EVAP System Test, Vehicle Information, and DTC Lookup. Icons represent each function.
Pangropéa
1. Apdet parangkat lunak
The LAUNCH Creader Elite offers lifetime free updates via Wi-Fi to ensure compatibility with new vehicle models and to receive new features and bug fixes.
- Pastikeun alat disambungkeun ka jaringan Wi-Fi stabil.
- From the main menu, select "Upgrade".
- The system will check for available updates. Follow the on-screen prompts to download and install them.
Image: A graphic illustrating the one-click WiFi update feature, highlighting "Bug Fixed," "More New Function," and "Newer Car Models" as benefits. It also mentions "Lifetime Free Update" and "Lifetime Free Tech Support."
2. beberesih sarta Panyimpenan
- Rapihkan alat dengan lembut, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Simpen alat dina tempat anu garing, tiis, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
- Keep the OBD2 cable free from kinks or damage.
3. Kaperawatan batré
- The device contains a Lithium Ion battery. Avoid fully discharging the battery frequently.
- If storing for extended periods, charge the battery to approximately 50% to prolong its lifespan.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat teu hurung. | kapasitas batré low. | Charge the device for at least 3 hours. If it still does not turn on, contact customer support. |
| Teu tiasa nyambung ka kendaraan. | Loose OBD2 cable connection; Vehicle ignition not in "ON" position; Vehicle not OBD2 compliant. | Ensure cable is securely connected. Turn ignition to "ON". Verify vehicle is OBD2 compliant (1996+ for general functions, specific models for JLR). |
| Specific functions (e.g., special functions, bi-directional control) not working. | Function not supported for the specific vehicle model/year; Software not updated. | Check compatibility for your specific vehicle VIN via the provided contact email (obdbox21@163.com). Perform a software update. |
| Received a second-hand product. | Amazon may re-shelf returned items. | Contact customer support (obdbox21@163.com) for a brand-new replacement. |
| Wi-Fi update issues. | Unstable Wi-Fi connection; Server issues. | Ensure strong Wi-Fi signal. Try updating again later. |
spésifikasi
- Sistem operasi: Android 6.0
- tampilan: Layar sentuh 4 inci
- Mémori: 2GB RAM + 16GB Panyimpenan
- Batré: 600mAh Lithium Ion (kaasup)
- Konektipitas: Wi-Fi, OBD2 Cable
- ukuran: 10.9 "L x 2" W x 8.5" H
- beurat: 1.4 pon
- Protokol dirojong: OBD2 (Note: Not Supported DOIP protocol)
- Basa anu Dirojong: Inggris, Spanyol, Perancis, Jerman, Italia, Rusia, Portugis, Cina Tradisional, Jepang, Polandia, Korea
Garansi sareng Rojongan
LAUNCH offers comprehensive support for the Creader Elite diagnostic tool.
- Garansi: 5-Year Quality Backup.
- Returns/Replacement: Extended 60-Day Return & Replacement policy.
- Bantuan Téknis: 24/7/365 Tech. assistance available.
- Kontak: For any questions or technical support, please reach out via email at obdbox21@163.com. Please note that LAUNCH Tech USA may not offer support to Amazon customers; direct contact with the provided email is recommended.
- Eupan Balik Online: You can submit online feedback of diagnostic problems directly through the device for analysis and troubleshooting by LAUNCH.
