1. Bubuka
Hatur nuhun pikeun milih éta AMPBANK AT001 Portable Tire Inflator. This device is designed for convenient and efficient inflation of various items, including car tires, motorcycle tires, bicycle tires, and sports balls. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.
Gambar 1.1: AMPBANK AT001 Portable Tire Inflator and included accessories.
2. Produk Langkungview
2.1 Komponén Kaasup
- 1 x AT001 Air Compressor
- 1 x Kabel Ngecas
- 1 x Inflation Hose with Schrader attached
- 1 x Needle adapter (for sports balls)
- 1 x Valve adapter (for inflatables)
- 1 x Presta valve adapter (for bicycles)
- 1 x Pituduh Pamaké Gancang
2.2 Fitur konci
- Inflasi gancang: Upgraded motor and alloy cylinder for faster inflation.
- Triple Cooling System: Heat-dissipating alloy cylinders, ventilated mesh, and built-in fan prevent overheating for continuous operation up to 30 minutes.
- Accurate Digital Pressure Gauge: High-precision sensor with 0.01Bar error margin and real-time display.
- Lima Modeu Prasetél: Dedicated modes for cars, motorcycles, bicycles, and sports balls, plus a custom mode.
- Pareum Otomatis: Stops inflation once the desired pressure is reached.
- Fungsi deflasi: Safely releases excess air from overinflated tires.
- Lampu LED terpadu: 400 lumens for illumination in low-light conditions.
- Bank Daya Portabel: Can charge mobile phones.
- Panyimpenan pinter: Integrated compartment for adapters to prevent loss.
3. Émbaran Kasalametan
Punten perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan kana alat:
- Jauhkeun tina jangkauan barudak.
- Ulah ngoperasikeun inflator dina kaayaan baseuh atanapi caket cairan atanapi gas anu gampang kaduruk.
- Ensure the inflation hose is securely connected to both the inflator and the item being inflated before starting.
- Do not overinflate. Always refer to the manufacturer's recommended pressure for the item being inflated.
- Monitor the pressure gauge during inflation to avoid exceeding the maximum pressure.
- If the device becomes excessively hot during use, allow it to cool down before continuing. The device has built-in overheat protection.
- Do not modify or disassemble the inflator. Contact customer support for repairs.
- Anggo ngan ukur kabel ngecas sareng adaptor anu disayogikeun.
4. Setélan
4.1 Ngecas Alat
The AMPBANK AT001 is powered by a Lithium Ion battery. Before first use, fully charge the device. Connect the provided charging cable to the inflator's charging port and to a suitable USB power source. The battery indicator on the digital display will show the charging status. A full charge provides extended usability.
Image 4.1: The internal battery of the AT001, highlighting its 5200mAh capacity for extended use.
4.2 Attaching the Inflation Hose and Adapters
Screw the inflation hose securely onto the inflator's air outlet. Select the appropriate adapter for the item you wish to inflate:
- Klep Schrader: For car, motorcycle, and most bicycle tires. The hose comes with a Schrader connector attached.
- Presta Valve Adaptor: For bicycles with Presta valves. Screw the Presta adapter onto the Schrader connector, then attach to the tire valve.
- Needle Adapter: For sports balls. Insert the needle into the ball's inflation port.
- Adaptor klep: For inflatable toys or other items.
The adapters can be stored in the integrated compartment on the device when not in use.
Image 4.2: Integrated storage design for inflation adapters.
5. Parentah Operasi
5.1 Powering on / Pareum
Pencét jeung tahan tombol daya (U) to turn the device on or off. The digital display will illuminate.
5.2 Nyetél Tekanan Anu Dipikahoyong
- With the device powered on, connect the inflation hose to the item you wish to inflate. The current pressure will be displayed.
- Press the 'M' button to cycle through the preset modes (Car, Motorcycle, Bicycle, Ball) or to select a custom pressure setting.
- Use the '+' and '-' buttons to adjust the target pressure. The display will show the target pressure blinking.
Image 5.1: Digital display showing real-time tire pressure and target setting.
5.3 Prosés Inflasi
- Once the target pressure is set, press the green trigger button to start inflation.
- The device will automatically stop when the target pressure is reached.
- Disconnect the hose from the item and then from the inflator.
Image 5.2: The AT001 in use, inflating a car tire.
5.4 Deflation Function
If an item is overinflated, the AT001 includes a deflation function. With the hose connected to the item, press and hold the deflation button (usually indicated by a downward arrow or specific icon) to release air until the desired pressure is reached. This feature helps prevent overpressure blowouts.
Image 5.3: The deflation function adapts to various road conditions and vehicle types.
5.5 Operasi Lampu LED
Press the LED light button (often integrated with the power button or a separate button) to turn the built-in 400 lumens LED flashlight on or off. This is useful for nighttime inflation or emergency situations.
Image 5.4: The 400 lumens LED flashlight provides ampkaterangan.
6. Pangropéa
- beberesih: Ngusap alat ku kaén anu lemes sareng garing. Ulah make bahan kimia kasar atawa cleaners abrasive.
- Panyimpenan: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure all accessories are stored in the integrated compartment to prevent loss.
- Perawatan batré: Pikeun umur batre anu optimal, ngecas alat sahenteuna tilu bulan sakali upami henteu dianggo rutin.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat teu hurung | Batré lemah; Karusakan alat | Charge the device fully; Contact customer support. |
| Inflator stops during operation or overheats | Overheat protection activated; Prolonged continuous use | Allow the device to cool down for at least 15-20 minutes before resuming use. The triple cooling system helps manage heat, but continuous operation beyond 30 minutes may trigger protection. |
| bacaan tekanan teu akurat | Hose not securely connected; Sensor issue | Ensure the hose is tightly screwed onto the valve; If problem persists, contact customer support. |
| Inflasi lalaunan | Low battery; Large volume item | Ensure the device is fully charged; Inflation time varies based on item size and initial pressure. |
8. Spésifikasi
- merek: AMPBANK
- Ngaran modél: AT001
- Voltage: 12 volt
- Sumber Daya: Batré Powered (Litium Ion)
- Tekanan Operasi Maksimum: 150 PSI
- Tingkat Noise: 50 dB
- Beurat barang: 2.29 pon (1.04 Kilogram)
- Fitur husus: Automatic Shut-Off, Cordless, LED Light, Pressure Detection, Quick Inflation
- Pamakéan anu disarankeun: Tire Inflation (Car, Motorcycle, SUV, Bicycle), Sports Balls, Inflatables
9. Garansi jeung Rojongan
AMPBANK offers the following for your AT001 Portable Tire Inflator:
- 100-Day Hassle-free Returns & Exchanges: For any issues within 100 days of purchase.
- 1-Year Extended Repair: Covers repairs for manufacturing defects for one year.
For customer support, please visit the official AMPBANK store or contact your retailer. Keep your purchase receipt for warranty claims.
Gambar 9.1: AMPBANK customer support information.
